[U-Boot] [PATCH 0/4] Add support for Cadence QSPI on K2G

[Marek Vasut]

On 04/13/2016 12:52 PM, Vignesh R wrote:
> 
> This series adds support for Cadence QSPI controller present on K2G SoC.
> 
> The first patch extends AHB address to 32 bit as K2G has 32 bit AHB
> address. Second patch enable QUAD mode based on DT data instead of
> relying on config option. And last to patches add DT node and add
> configs to enable the driver.
> 
> Depends on [1] to enable SPI driver model support on K2G and [2] to
> support different bus frequencies for two different SPI controllers
> present on K2G EVM.

Are you OK if I wrap the first two patches into V11 of the Cadence QSPI
submission and add your SoB to the submission?

> [1]https://www.mail-archive.com/u-boot@lists.denx.de/msg209556.html
> [2]https://patchwork.ozlabs.org/patch/609947/
> 
> Vignesh R (4):
>   spi: cadence_qspi_apb: Support 32 bit AHB address
>   spi: cadence_quadspi: Enable QUAD mode based on DT data
>   ARM: dts: K2G: Add support for QSPI controller
>   defconfig: k2g_evm_defconfig: Enable Cadence QSPI controller
> 
>  arch/arm/dts/k2g-evm.dts       | 45 ++++++++++++++++++++++++++++++++++++++++++
>  arch/arm/dts/k2g.dtsi          | 14 +++++++++++++
>  configs/k2g_evm_defconfig      |  2 ++
>  drivers/spi/cadence_qspi.c     |  3 ++-
>  drivers/spi/cadence_qspi.h     |  2 +-
>  drivers/spi/cadence_qspi_apb.c | 15 +++++++-------
>  include/configs/k2g_evm.h      |  6 ++++++
>  7 files changed, 77 insertions(+), 10 deletions(-)
> 


-- 
Best regards,
Marek Vasut