[U-Boot] Using U-Boot to load RTOS

[Niti Gupta]

On 6 April 2016 at 11:09, Bin Meng <bmeng.cn at gmail.com> wrote:

> On Wed, Apr 6, 2016 at 1:21 PM, Niti Gupta <gupta.niti61 at gmail.com> wrote:
> > Hello Bin,
> >
> > I am trying to load Segger's embOS.
> >
>
> Please avoid top-posting.
>
> I don't know this OS, but you can try 'bootelf' command if embOS image
> is an ELF image. If there is anything special, you need write your own
> boot command for the OS.
>
> > Thanks,
> > Niti Gupta
> >
> > On 6 April 2016 at 07:18, Bin Meng <bmeng.cn at gmail.com> wrote:
> >>
> >> On Wed, Apr 6, 2016 at 3:07 AM, Niti Gupta <gupta.niti61 at gmail.com>
> wrote:
> >> > Hello,
> >> >
> >> >
> >> > I am working on embedded systems. I want to use u-boot to load rtos on
> >> > freescale i.MUX6UL board but failed to find appropriate way to do
> >> > this. Kindly help me to find out steps to load rtos from u-boot.
> >> >
> >>
> >> What RTOS are you trying to load?
>
> Regards,
> Bin
>
Thanks for reply.
embOS image is .out image. I think it is similar to .elf image. I will try
bootelf command to load this.
Thanks,
Niti