[U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT

[Fabio Estevam]

Tom/Stefano,

On Wed, Apr 20, 2016 at 10:48 PM, Fabio Estevam <festevam at gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
>
> mx6ul_evk does not come with a eMMC populated, so we should not
> define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able
> to boot some brands of SD cards, such as SanDisk microSD HC - 8GB:
>
> U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11)
> Trying to boot from MMC1
> spl: mmc block read error
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
> When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns
> MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot
> via SD card.
>
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Could this one be applied for 2016.05?

Thanks