[U-Boot] [PATCH] debug_uart: output CR along with LF

[Daniel Schwierzeck]

Hi Tim,

2016-04-04 17:16 GMT+02:00 Tim Chick <Tim.Chick at mediatek.com>:
> Hi Masahiro,
>
> This patch breaks the debug_uart on my MIPS board. It means printascii now uses the stack, and my board does not have a stack when debug_uart_init is called. debug_uart_init calls printascii if DEBUG_UART_ANNOUNCE is defined.

do you call debug_uart_init() in lowlevel_init()?

>
> The patch below fixes it, and keeps your change:
>
> Thanks,
> Tim
>
>
> ---
>
> diff --git a/include/debug_uart.h b/include/debug_uart.h
> index 0d640b9..2980ae6 100644
> --- a/include/debug_uart.h
> +++ b/include/debug_uart.h
> @@ -115,17 +115,23 @@ void printhex8(uint value);
>   * Now define some functions - this should be inserted into the serial driver
>   */
>  #define DEBUG_UART_FUNCS \
> -       void printch(int ch) \
> +\
> +       static inline void _printch(int ch) \
>         { \
>                 if (ch == '\n') \
>                         _debug_uart_putc('\r'); \
>                 _debug_uart_putc(ch); \
>         } \
>  \
> +       void printch(int ch) \
> +       { \
> +               _printch(ch); \
> +       } \
> +\
>         void printascii(const char *str) \
>         { \
>                 while (*str) \
> -                       printch(*str++); \
> +                       _printch(*str++); \
>         } \
>  \
>         static inline void printhex1(uint digit) \
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot



-- 
- Daniel