[U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable

[Joe Hershberger]

On Wed, Apr 27, 2016 at 10:46 AM, Dan Murphy <dmurphy at ti.com> wrote:
> Joe
>
> On 04/26/2016 04:44 PM, Joe Hershberger wrote:
>> On Mon, Apr 25, 2016 at 4:35 PM, Joe Hershberger
>> <joe.hershberger at gmail.com> wrote:
>>> On Fri, Apr 15, 2016 at 7:27 AM, Dan Murphy <dmurphy at ti.com> wrote:
>>>> Not all devices use the same internal delay or fifo depth.
>>>> Add the ability to set the internal delay for rx or tx and the
>>>> fifo depth via the devicetree.  If the value is not set in the
>>>> devicetree then set the delay to the default.
>>>>
>>>> If devicetree is not used then use the default defines within the
>>>> driver.
>>>>
>>>> Signed-off-by: Dan Murphy <dmurphy at ti.com>
>>> Acked-by: Joe Hershberger <joe.hershberger at ni.com>
>> This patch is not checkpatch.pl clean. Please resubmit.
>>
>>
>> 610950.mbox:140: WARNING: line over 80 characters
>> 610950.mbox:153: WARNING: line over 80 characters
>> 610950.mbox:154: WARNING: line over 80 characters
>> 610950.mbox:165: WARNING: line over 80 characters
>> total: 0 errors, 4 warnings, 0 checks, 136 lines checked
>
> How do you want me to rebase these patches on the SGMII work from Michal on the ti.c
> or off of master?  The patch I submitted was based off of the SGMII patchset.

I'm pulling in some of Michal's patches this release. Please reference
which patches this depends on (patchwork links).

> Need to know how you want to handle this as I see the SGMII code is not in the base line
> yet.

If the patches you depend on are acceptable (no changes requested)
then definitely base your changes on them, but point them out to me.

Thanks,
-Joe