[U-Boot] [PATCH 0/2] ARM: AT91: add AT91 PIO4 pinctrl driver

[Yang, Wenyou]

Hi Andreas,

This patch set is here for a while, could you  make time to review it and give me some advice? 

So that I can move forward on this topic.

> -----Original Message-----
> From: Andreas Bießmann [mailto:andreas at biessmann.de]
> Sent: 2016年4月7日 12:21
> To: Yang, Wenyou <Wenyou.Yang at atmel.com>
> Cc: u-boot at lists.denx.de
> Subject: Re: [U-Boot] [PATCH 0/2] ARM: AT91: add AT91 PIO4 pinctrl driver
> 
> Hi Wenyou,
> 
> Really cool to see the first dm based driver for atmel devices! I'll dive into this
> weekend.
> 
> Best regards
> 
> Andreas
> 
> > Am 07.04.2016 um 04:15 schrieb Wenyou Yang <wenyou.yang at atmel.com>:
> >
> > AT91 PIO4 controller is a combined gpio-controller, pin-mux and
> > pin-config module. This patch is to add the pinctrl driver with driver
> > model and device tree support.
> >
> >
> > Wenyou Yang (2):
> >  pinctrl: at91-pio4: add pinctrl driver
> >  atmel: bring in at91 pio4 device tree file and bindings
> >
> > arch/arm/dts/sama5d2-pinfunc.h                     | 880 +++++++++++++++++++++
> > arch/arm/mach-at91/include/mach/atmel_pio4.h       |  35 +
> > .../pinctrl/atmel,at91-pio4-pinctrl.txt            |  65 ++
> > drivers/pinctrl/Kconfig                            |   7 +
> > drivers/pinctrl/Makefile                           |   1 +
> > drivers/pinctrl/pinctrl-at91-pio4.c                | 164 ++++
> > 6 files changed, 1152 insertions(+)
> > create mode 100644 arch/arm/dts/sama5d2-pinfunc.h create mode 100644
> > doc/device-tree-bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
> > create mode 100644 drivers/pinctrl/pinctrl-at91-pio4.c
> >
> > --
> > 2.7.4
> >
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot


Best Regards,
Wenyou Yang