[U-Boot] [PATCH] am57x: Move CONS_INDEX to Kconfig

Daniel Allred d-allred at ti.com
Thu Apr 7 04:59:34 CEST 2016


    - Move the CONS_INDEX selection out of CONFIG_SYS_EXTRA_OPTIONS and
      into Kconfig proper.
    - Edit the relevant am57x configs to remove the now unneeded
      CONFIG_SYS_EXTRA_OPTIONS.

Signed-off-by: Daniel Allred <d-allred at ti.com>
---
 board/ti/am57xx/Kconfig           | 9 +++++++++
 configs/am57xx_evm_defconfig      | 1 -
 configs/am57xx_evm_nodt_defconfig | 1 -
 3 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/board/ti/am57xx/Kconfig b/board/ti/am57xx/Kconfig
index 17745ff..87654f9 100644
--- a/board/ti/am57xx/Kconfig
+++ b/board/ti/am57xx/Kconfig
@@ -9,6 +9,15 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
 	default "am57xx_evm"
 
+config CONS_INDEX
+        int "UART used for console"
+        range 1 6
+        default 3
+        help
+          The AM57x (and DRA7xx) SoC has a total of 6 UARTs available to it.
+          Depending on your specific board you may want something other than UART3
+          here.
+
 source "board/ti/common/Kconfig"
 
 endif
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
index 1090287..e40c24a 100644
--- a/configs/am57xx_evm_defconfig
+++ b/configs/am57xx_evm_defconfig
@@ -7,7 +7,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
diff --git a/configs/am57xx_evm_nodt_defconfig b/configs/am57xx_evm_nodt_defconfig
index 7641db5..cb91719 100644
--- a/configs/am57xx_evm_nodt_defconfig
+++ b/configs/am57xx_evm_nodt_defconfig
@@ -2,7 +2,6 @@ CONFIG_ARM=y
 CONFIG_OMAP54XX=y
 CONFIG_TARGET_BEAGLE_X15=y
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
-- 
1.9.1



More information about the U-Boot mailing list