[U-Boot] [PATCH] net: Add mv88e60xx support to the mv88e61xx driver

[Joe Hershberger]

Hi Joshua,

On Tue, Apr 26, 2016 at 2:19 PM, Joe Hershberger
<joe.hershberger at gmail.com> wrote:
> On Mon, Jan 5, 2015 at 8:15 PM, Joshua Scott
> <joshua.scott at alliedtelesis.co.nz> wrote:
>> The Marvell Link Street mv88e60xx is a series of FastEthernet switch
>> chips, some of which also support Gigabit ports. It is similar to the
>> mv88e61xx series which support Gigabit on all ports.
>>
>> There is already a driver for the mv88e61xx in U-Boot, and this patch
>> updates it to also work with the mv88e60xx.
>>
>> The main change that was required was the size of the port bitmaps.
>> Previously, 8-bit port bitmaps were in use, as the driver had only
>> been used with six-port mv88e61xx devices.
>>
>> This has been changed so that 16-bit port bitmaps are now used, which
>> covers the largest port-counts available for the mv88e60xx / mv88e61xx.
>>
>> Reviewed-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
>> Signed-off-by: Joshua Scott <joshua.scott at alliedtelesis.co.nz>
>
> Acked-by: Joe Hershberger <joe.hershberger at ni.com>

On second thought, I noticed this conflicts with the patches that
Kevin Smith has been working on. I'm build testing them along with
other patches and will send a pull request.

Please rebase this patch on top of
https://patchwork.ozlabs.org/patch/604277/ and
https://patchwork.ozlabs.org/patch/604278/

Thanks,
-Joe