[U-Boot] [PATCH 05/11] ARM: omap5: add platform specific ethernet phy modes configurations

[Mugunthan V N]

Add platforms specific phy mode configuration bits to be used
to configure phy mode in control module.

Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
---
 arch/arm/include/asm/arch-omap5/cpu.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h
index b1513e9..683d905 100644
--- a/arch/arm/include/asm/arch-omap5/cpu.h
+++ b/arch/arm/include/asm/arch-omap5/cpu.h
@@ -116,4 +116,16 @@ struct watchdog {
 #define CPSW_BASE			0x48484000
 #define CPSW_MDIO_BASE			0x48485000
 
+/* gmii_sel register defines */
+#define GMII1_SEL_MII		0x0
+#define GMII1_SEL_RMII		0x1
+#define GMII1_SEL_RGMII		0x2
+#define GMII2_SEL_MII		(GMII1_SEL_MII << 4)
+#define GMII2_SEL_RMII		(GMII1_SEL_RMII << 4)
+#define GMII2_SEL_RGMII		(GMII1_SEL_RGMII << 4)
+
+#define MII_MODE_ENABLE		(GMII1_SEL_MII | GMII2_SEL_MII)
+#define RMII_MODE_ENABLE        (GMII1_SEL_RMII | GMII2_SEL_RMII)
+#define RGMII_MODE_ENABLE	(GMII1_SEL_RGMII | GMII2_SEL_RGMII)
+
 #endif /* _CPU_H */
-- 
2.8.1.101.g72d917a