[U-Boot] EHCI timed out on TD - token=0x80008d80

[Marek Vasut]

On 04/21/2016 08:25 AM, Manjunath wrote:
> Hello Marek,

Hi

> If the USB is detected successfully, then below are the logs.

My understanding is that you use u-boot 2013.04, which is about three
years old now ? If you observe some problem, please try with mainline
first and report back.

> U-Boot > usb start
> (Re)start USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... New Device 0
> usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x40
> set address 1
> usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length 0x0
> usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0 length 0x12
> usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x9
> usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0 length 0x19
> get_conf_no 0 Result 25, wLength 25

[...]

Best regards,
Marek Vasut