[U-Boot] [PATCH] travis: turn off dtc unit address warnings

[Marek Vasut]

On 04/21/2016 03:17 PM, Heiko Schocher wrote:
> Hello Marek,
> 
> Am 21.04.2016 um 14:51 schrieb Marek Vasut:
>> On 04/21/2016 02:48 PM, Heiko Schocher wrote:
>>> suppress a lot of
>>> "reg or ranges property, but no unit name" warnings,
>>> through the dtc compiler flag "-Wno-unit_address_vs_reg".
>>>
>>> If all DTS are fixed, we can remove this flag again.
>>>
>>> Signed-off-by: Heiko Schocher <hs at denx.de>
>>> ---
>>> There is also a solution to suppress warnings from
>>> the dtc compiler by the "-q" flag, but that would
>>> suppress all warnings. Not realy what I want.
>>
>> Yep
>>
>>> With this patch and patch:
>>> http://patchwork.ozlabs.org/patch/609150/
>>>
>>> travis build passes, see:
>>> https://travis-ci.org/hsdenx/u-boot/builds/124723016
>>>
>>>
>>>   arch/arc/dts/Makefile        | 2 ++
>>>   arch/arm/dts/Makefile        | 3 ++-
>>>   arch/microblaze/dts/Makefile | 2 ++
>>>   arch/mips/dts/Makefile       | 3 ++-
>>>   arch/nios2/dts/Makefile      | 2 ++
>>>   arch/powerpc/dts/Makefile    | 2 ++
>>>   arch/sandbox/dts/Makefile    | 2 ++
>>>   arch/x86/dts/Makefile        | 2 ++
>>>   8 files changed, 16 insertions(+), 2 deletions(-)
>>
>> Isn't there some common place in scripts/ or so where we can disable
>> this warning using an one-liner ?
> 
> I don;t know ... but I prefer to disable this per arch .. so we can
> enable the check back if one arch is fixed ...

In my opinion, we should stick to the same behavior Linux does.
Ccing a few more people.

-- 
Best regards,
Marek Vasut