[U-Boot] [PATCH v6 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file

Sriram Dash sriram.dash at nxp.com
Tue Apr 5 11:11:19 CEST 2016


Move usb device-tree fixup framework from ehci-fsl.c to common place so
that it can be used by other drivers as well (xhci-fsl.c).

Signed-off-by: Ramneek Mehresh <ramneek.mehresh at nxp.com>
Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
Acked-by: Marek Vasut <marex at denx.de>
---
Changes in v6:
  - No update
Changes in v5:
  - No update
Changes in v4:
  - Retain copyright info
  - Remove #include from fsl-dt-fixup.c which are not used currently.
Changes in v3:
  - git commit -M -C to generate patches
  - Break the patch 1(Moving dt fix up and removing code duplication) into 2 patches
Changes in v2:
  - Remove the #defines from the patch

 Makefile                                           |   1 +
 drivers/usb/common/Makefile                        |   6 +
 .../usb/{host/ehci-fsl.c => common/fsl-dt-fixup.c} | 157 -----------------
 drivers/usb/host/ehci-fsl.c                        | 195 ---------------------
 4 files changed, 7 insertions(+), 352 deletions(-)
 create mode 100644 drivers/usb/common/Makefile
 copy drivers/usb/{host/ehci-fsl.c => common/fsl-dt-fixup.c} (54%)

diff --git a/Makefile b/Makefile
index 25ef3c1..ea7fd00 100644
--- a/Makefile
+++ b/Makefile
@@ -648,6 +648,7 @@ libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
 libs-y += drivers/serial/
 libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/common/
 libs-y += drivers/usb/emul/
 libs-y += drivers/usb/eth/
 libs-y += drivers/usb/gadget/
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
new file mode 100644
index 0000000..a38ee4a
--- /dev/null
+++ b/drivers/usb/common/Makefile
@@ -0,0 +1,6 @@
+# (C) Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/common/fsl-dt-fixup.c
similarity index 54%
copy from drivers/usb/host/ehci-fsl.c
copy to drivers/usb/common/fsl-dt-fixup.c
index 4bcea9d..92adb46 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/common/fsl-dt-fixup.c
@@ -9,172 +9,16 @@
  */
 
 #include <common.h>
-#include <pci.h>
 #include <usb.h>
 #include <asm/io.h>
-#include <usb/ehci-ci.h>
 #include <hwconfig.h>
 #include <fsl_usb.h>
 #include <fdt_support.h>
 
-#include "ehci.h"
-
 #ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 #endif
 
-static void set_txfifothresh(struct usb_ehci *, u32);
-
-/* Check USB PHY clock valid */
-static int usb_phy_clk_valid(struct usb_ehci *ehci)
-{
-	if (!((in_be32(&ehci->control) & PHY_CLK_VALID) ||
-			in_be32(&ehci->prictrl))) {
-		printf("USB PHY clock invalid!\n");
-		return 0;
-	} else {
-		return 1;
-	}
-}
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- *
- * Excerpts from linux ehci fsl driver.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	struct usb_ehci *ehci = NULL;
-	const char *phy_type = NULL;
-	size_t len;
-	char current_usb_controller[5];
-#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-	char usb_phy[5];
-
-	usb_phy[0] = '\0';
-#endif
-	if (has_erratum_a007075()) {
-		/*
-		 * A 5ms delay is needed after applying soft-reset to the
-		 * controller to let external ULPI phy come out of reset.
-		 * This delay needs to be added before re-initializing
-		 * the controller after soft-resetting completes
-		 */
-		mdelay(5);
-	}
-	memset(current_usb_controller, '\0', 5);
-	snprintf(current_usb_controller, 4, "usb%d", index+1);
-
-	switch (index) {
-	case 0:
-		ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
-		break;
-	case 1:
-		ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB2_ADDR;
-		break;
-	default:
-		printf("ERROR: wrong controller index!!\n");
-		return -EINVAL;
-	};
-
-	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
-	*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
-			HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	/* Set to Host mode */
-	setbits_le32(&ehci->usbmode, CM_HOST);
-
-	out_be32(&ehci->snoop1, SNOOP_SIZE_2GB);
-	out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
-
-	/* Init phy */
-	if (hwconfig_sub(current_usb_controller, "phy_type"))
-		phy_type = hwconfig_subarg(current_usb_controller,
-				"phy_type", &len);
-	else
-		phy_type = getenv("usb_phy_type");
-
-	if (!phy_type) {
-#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
-		/* if none specified assume internal UTMI */
-		strcpy(usb_phy, "utmi");
-		phy_type = usb_phy;
-#else
-		printf("WARNING: USB phy type not defined !!\n");
-		return -1;
-#endif
-	}
-
-	if (!strncmp(phy_type, "utmi", 4)) {
-#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
-		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
-				PHY_CLK_SEL_UTMI);
-		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
-				UTMI_PHY_EN);
-		udelay(1000); /* delay required for PHY Clk to appear */
-#endif
-		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
-		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
-				USB_EN);
-	} else {
-		clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK,
-				PHY_CLK_SEL_ULPI);
-		clrsetbits_be32(&ehci->control, UTMI_PHY_EN |
-				CONTROL_REGISTER_W1C_MASK, USB_EN);
-		udelay(1000); /* delay required for PHY Clk to appear */
-		if (!usb_phy_clk_valid(ehci))
-			return -EINVAL;
-		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
-	}
-
-	out_be32(&ehci->prictrl, 0x0000000c);
-	out_be32(&ehci->age_cnt_limit, 0x00000040);
-	out_be32(&ehci->sictrl, 0x00000001);
-
-	in_le32(&ehci->usbmode);
-
-	if (has_erratum_a007798())
-		set_txfifothresh(ehci, TXFIFOTHRESH);
-
-	if (has_erratum_a004477()) {
-		/*
-		 * When reset is issued while any ULPI transaction is ongoing
-		 * then it may result to corruption of ULPI Function Control
-		 * Register which eventually causes phy clock to enter low
-		 * power mode which stops the clock. Thus delay is required
-		 * before reset to let ongoing ULPI transaction complete.
-		 */
-		udelay(1);
-	}
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
-	return 0;
-}
-
-/*
- * Setting the value of TXFIFO_THRESH field in TXFILLTUNING register
- * to counter DDR latencies in writing data into Tx buffer.
- * This prevents Tx buffer from getting underrun
- */
-static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh)
-{
-	u32 cmd;
-	cmd = ehci_readl(&ehci->txfilltuning);
-	cmd &= ~TXFIFO_THRESH_MASK;
-	cmd |= TXFIFO_THRESH(txfifo_thresh);
-	ehci_writel(&ehci->txfilltuning, cmd);
-}
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
 static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
 				       const char *phy_type, int start_offset)
 {
@@ -367,4 +211,3 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 		}
 	}
 }
-#endif
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 4bcea9d..a43d37d 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -173,198 +173,3 @@ static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh)
 	cmd |= TXFIFO_THRESH(txfifo_thresh);
 	ehci_writel(&ehci->txfilltuning, cmd);
 }
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
-				       const char *phy_type, int start_offset)
-{
-	const char *compat_dr = "fsl-usb2-dr";
-	const char *compat_mph = "fsl-usb2-mph";
-	const char *prop_mode = "dr_mode";
-	const char *prop_type = "phy_type";
-	const char *node_type = NULL;
-	int node_offset;
-	int err;
-
-	node_offset = fdt_node_offset_by_compatible(blob,
-						    start_offset, compat_mph);
-	if (node_offset < 0) {
-		node_offset = fdt_node_offset_by_compatible(blob,
-							    start_offset,
-							    compat_dr);
-		if (node_offset < 0) {
-			printf("WARNING: could not find compatible node: %s",
-			       fdt_strerror(node_offset));
-			return -1;
-		}
-		node_type = compat_dr;
-	} else {
-		node_type = compat_mph;
-	}
-
-	if (mode) {
-		err = fdt_setprop(blob, node_offset, prop_mode, mode,
-				  strlen(mode) + 1);
-		if (err < 0)
-			printf("WARNING: could not set %s for %s: %s.\n",
-			       prop_mode, node_type, fdt_strerror(err));
-	}
-
-	if (phy_type) {
-		err = fdt_setprop(blob, node_offset, prop_type, phy_type,
-				  strlen(phy_type) + 1);
-		if (err < 0)
-			printf("WARNING: could not set %s for %s: %s.\n",
-			       prop_type, node_type, fdt_strerror(err));
-	}
-
-	return node_offset;
-}
-
-static const char *fdt_usb_get_node_type(void *blob, int start_offset,
-					 int *node_offset)
-{
-	const char *compat_dr = "fsl-usb2-dr";
-	const char *compat_mph = "fsl-usb2-mph";
-	const char *node_type = NULL;
-
-	*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
-						     compat_mph);
-	if (*node_offset < 0) {
-		*node_offset = fdt_node_offset_by_compatible(blob,
-							     start_offset,
-							     compat_dr);
-		if (*node_offset < 0) {
-			printf("ERROR: could not find compatible node: %s\n",
-			       fdt_strerror(*node_offset));
-		} else {
-			node_type = compat_dr;
-		}
-	} else {
-		node_type = compat_mph;
-	}
-
-	return node_type;
-}
-
-static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
-				 int start_offset)
-{
-	int node_offset, err;
-	const char *node_type = NULL;
-
-	node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
-	if (!node_type)
-		return -1;
-
-	err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
-	if (err < 0) {
-		printf("ERROR: could not set %s for %s: %s.\n",
-		       prop_erratum, node_type, fdt_strerror(err));
-	}
-
-	return node_offset;
-}
-
-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-{
-	static const char * const modes[] = { "host", "peripheral", "otg" };
-	static const char * const phys[] = { "ulpi", "utmi", "utmi_dual" };
-	int usb_erratum_a006261_off = -1;
-	int usb_erratum_a007075_off = -1;
-	int usb_erratum_a007792_off = -1;
-	int usb_erratum_a005697_off = -1;
-	int usb_mode_off = -1;
-	int usb_phy_off = -1;
-	char str[5];
-	int i, j;
-
-	for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
-		const char *dr_mode_type = NULL;
-		const char *dr_phy_type = NULL;
-		int mode_idx = -1, phy_idx = -1;
-
-		snprintf(str, 5, "%s%d", "usb", i);
-		if (hwconfig(str)) {
-			for (j = 0; j < ARRAY_SIZE(modes); j++) {
-				if (hwconfig_subarg_cmp(str, "dr_mode",
-							modes[j])) {
-					mode_idx = j;
-					break;
-				}
-			}
-
-			for (j = 0; j < ARRAY_SIZE(phys); j++) {
-				if (hwconfig_subarg_cmp(str, "phy_type",
-							phys[j])) {
-					phy_idx = j;
-					break;
-				}
-			}
-
-			if (mode_idx < 0 && phy_idx < 0) {
-				printf("WARNING: invalid phy or mode\n");
-				return;
-			}
-
-			if (mode_idx > -1)
-				dr_mode_type = modes[mode_idx];
-
-			if (phy_idx > -1)
-				dr_phy_type = phys[phy_idx];
-		}
-
-		if (has_dual_phy())
-			dr_phy_type = phys[2];
-
-		usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
-							   dr_mode_type, NULL,
-							   usb_mode_off);
-
-		if (usb_mode_off < 0)
-			return;
-
-		usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
-							  NULL, dr_phy_type,
-							  usb_phy_off);
-
-		if (usb_phy_off < 0)
-			return;
-
-		if (has_erratum_a006261()) {
-			usb_erratum_a006261_off =  fdt_fixup_usb_erratum
-						   (blob,
-						    "fsl,usb-erratum-a006261",
-						    usb_erratum_a006261_off);
-			if (usb_erratum_a006261_off < 0)
-				return;
-		}
-
-		if (has_erratum_a007075()) {
-			usb_erratum_a007075_off =  fdt_fixup_usb_erratum
-						   (blob,
-						    "fsl,usb-erratum-a007075",
-						    usb_erratum_a007075_off);
-			if (usb_erratum_a007075_off < 0)
-				return;
-		}
-
-		if (has_erratum_a007792()) {
-			usb_erratum_a007792_off =  fdt_fixup_usb_erratum
-						   (blob,
-						    "fsl,usb-erratum-a007792",
-						    usb_erratum_a007792_off);
-			if (usb_erratum_a007792_off < 0)
-				return;
-		}
-		if (has_erratum_a005697()) {
-			usb_erratum_a005697_off =  fdt_fixup_usb_erratum
-						   (blob,
-						    "fsl,usb-erratum-a005697",
-						    usb_erratum_a005697_off);
-			if (usb_erratum_a005697_off < 0)
-				return;
-		}
-	}
-}
-#endif
-- 
2.1.0



More information about the U-Boot mailing list