[U-Boot] [PATCH 1/3] fastboot: Clean up bulk-out logic
Lukasz Majewski
l.majewski at majess.pl
Fri Apr 22 05:52:27 CEST 2016
On Thu, 21 Apr 2016 19:59:21 -0700
Steve Rae <steve.rae at broadcom.com> wrote:
> On Thu, Apr 21, 2016 at 3:03 AM, Lukasz Majewski
> <l.majewski at samsung.com> wrote:
>
> > Hi Roger,
> >
> > > Just use ep->maxpacket to get the maxpacket size
> > > and simplify the bulk-out maxpacket alignment.
> > >
> > > Signed-off-by: Roger Quadros <rogerq at ti.com>
> > > Tested-by: Steve Rae <srae at broadcom.com>
> > > ---
> > > drivers/usb/gadget/f_fastboot.c | 50
> > > +++++++++++++++++++---------------------- 1 file changed, 23
> > > insertions(+), 27 deletions(-)
> > >
> > > diff --git a/drivers/usb/gadget/f_fastboot.c
> > > b/drivers/usb/gadget/f_fastboot.c index 7961231..28b244a 100644
> > > --- a/drivers/usb/gadget/f_fastboot.c
> > > +++ b/drivers/usb/gadget/f_fastboot.c
> > > @@ -39,6 +39,11 @@
> > > #define TX_ENDPOINT_MAXIMUM_PACKET_SIZE (0x0040)
> > >
> > > #define EP_BUFFER_SIZE 4096
> > > +/*
> > > + * EP_BUFFER_SIZE must always be an integral multiple of
> > > maxpacket size
> > > + * (64 or 512 or 1024), else we break on certain controllers like
> > > DWC3
> > > + * that expect bulk OUT requests to be divisible by maxpacket
> > > size.
> > > + */
> > >
> > > struct f_fastboot {
> > > struct usb_function usb_function;
> > > @@ -57,7 +62,6 @@ static struct f_fastboot *fastboot_func;
> > > static unsigned int fastboot_flash_session_id;
> > > static unsigned int download_size;
> > > static unsigned int download_bytes;
> > > -static bool is_high_speed;
> > >
> > > static struct usb_endpoint_descriptor fs_ep_in = {
> > > .bLength = USB_DT_ENDPOINT_SIZE,
> > > @@ -269,11 +273,6 @@ static int fastboot_set_alt(struct
> > > usb_function *f, debug("%s: func: %s intf: %d alt: %d\n",
> > > __func__, f->name, interface, alt);
> > >
> > > - if (gadget->speed == USB_SPEED_HIGH)
> > > - is_high_speed = true;
> > > - else
> > > - is_high_speed = false;
> > > -
> > > d = fb_ep_desc(gadget, &fs_ep_out, &hs_ep_out);
> > > ret = usb_ep_enable(f_fb->out_ep, d);
> > > if (ret) {
> > > @@ -455,20 +454,27 @@ static void cb_getvar(struct usb_ep *ep,
> > > struct usb_request *req) fastboot_tx_write_str(response);
> > > }
> > >
> > > -static unsigned int rx_bytes_expected(unsigned int maxpacket)
> > > +static unsigned int rx_bytes_expected(struct usb_ep *ep)
> > > {
> > > int rx_remain = download_size - download_bytes;
> > > - int rem = 0;
> > > - if (rx_remain < 0)
> > > + unsigned int rem;
> > > + unsigned int maxpacket = ep->maxpacket;
> > > +
> > > + if (rx_remain <= 0)
> > > return 0;
> > > - if (rx_remain > EP_BUFFER_SIZE)
> > > + else if (rx_remain > EP_BUFFER_SIZE)
> > > return EP_BUFFER_SIZE;
> > > - if (rx_remain < maxpacket) {
> > > - rx_remain = maxpacket;
> > > - } else if (rx_remain % maxpacket != 0) {
> > > - rem = rx_remain % maxpacket;
> > > +
> > > + /*
> > > + * Some controllers e.g. DWC3 don't like OUT transfers to be
> > > + * not ending in maxpacket boundary. So just make them happy
> > > by
> > > + * always requesting for integral multiple of maxpackets.
> > > + * This shouldn't bother controllers that don't care about
> > > it.
> > > + */
> > > + rem = rx_remain % maxpacket;
> > > + if (rem > 0)
> > > rx_remain = rx_remain + (maxpacket - rem);
> > > - }
> > > +
> > > return rx_remain;
> > > }
> > >
> > > @@ -480,7 +486,6 @@ static void rx_handler_dl_image(struct usb_ep
> > > *ep, struct usb_request *req) const unsigned char *buffer =
> > > req->buf; unsigned int buffer_size = req->actual;
> > > unsigned int pre_dot_num, now_dot_num;
> > > - unsigned int max;
> > >
> > > if (req->status != 0) {
> > > printf("Bad status: %d\n", req->status);
> > > @@ -518,11 +523,7 @@ static void rx_handler_dl_image(struct usb_ep
> > > *ep, struct usb_request *req)
> > > printf("\ndownloading of %d bytes finished\n",
> > > download_bytes); } else {
> > > - max = is_high_speed ? hs_ep_out.wMaxPacketSize :
> > > - fs_ep_out.wMaxPacketSize;
> > > - req->length = rx_bytes_expected(max);
> > > - if (req->length < ep->maxpacket)
> > > - req->length = ep->maxpacket;
> > > + req->length = rx_bytes_expected(ep);
> > > }
> > >
> > > req->actual = 0;
> > > @@ -533,7 +534,6 @@ static void cb_download(struct usb_ep *ep,
> > > struct usb_request *req) {
> > > char *cmd = req->buf;
> > > char response[FASTBOOT_RESPONSE_LEN];
> > > - unsigned int max;
> > >
> > > strsep(&cmd, ":");
> > > download_size = simple_strtoul(cmd, NULL, 16);
> > > @@ -549,11 +549,7 @@ static void cb_download(struct usb_ep *ep,
> > > struct usb_request *req) } else {
> > > sprintf(response, "DATA%08x", download_size);
> > > req->complete = rx_handler_dl_image;
> > > - max = is_high_speed ? hs_ep_out.wMaxPacketSize :
> > > - fs_ep_out.wMaxPacketSize;
> > > - req->length = rx_bytes_expected(max);
> > > - if (req->length < ep->maxpacket)
> > > - req->length = ep->maxpacket;
> > > + req->length = rx_bytes_expected(ep);
> > > }
> > > fastboot_tx_write_str(response);
> > > }
> >
> > I cannot apply this patch on temporary u-boot-usb/master branch
> > (SHA1: e6c0bc0643e5a4387fecbcf83080d0b796eb067c).
> >
> > Could you apply your changes (from this patch) on top of newest
> > u-boot-usb repo?
> >
> > Lukasz, (in case Roger doesn't reply soon....)
> -- this needs to be applied on top of his earlier patches:
> (1) http://patchwork.ozlabs.org/patch/609417/
> [U-Boot,1/2] fastboot: Fix wMaxPacketSize for High-Speed IN
> endpoint (2) http://patchwork.ozlabs.org/patch/609896/
> [U-Boot,v2,2/2] fastboot: Enable the respective speed
> endpoints at runtime
>
> ... then this one will apply
> (http://patchwork.ozlabs.org/patch/612006/)
Steve, thanks for tip. I was missing this information :-)
Best regards,
Łukasz
>
> Thanks, Steve
>
> --
> > Best regards,
> >
> > Lukasz Majewski
> >
> > Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
> >
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160422/fc936c89/attachment.sig>
More information about the U-Boot
mailing list