[U-Boot] [PATCH 02/10] ddr: altera: Tweak DQS tracking enable handling

[Marek Vasut]

In the most unlikely case the DQS tracking was to be disabled,
make sure we do not errornously re-enable it. Note that DQS
tracking is enabled on all systems observed thus far.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
Cc: Chin Liang See <clsee at altera.com>
---
 drivers/ddr/altera/sequencer.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 34b1aa7..bf74b4e 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -3479,6 +3479,7 @@ grp_failed:		/* A group failed, increment the counter. */
 static int run_mem_calibrate(void)
 {
 	int pass;
+	u32 ctrl_cfg;
 
 	debug("%s:%d\n", __func__, __LINE__);
 
@@ -3486,7 +3487,9 @@ static int run_mem_calibrate(void)
 	writel(PHY_MGR_CAL_RESET, &phy_mgr_cfg->cal_status);
 
 	/* Stop tracking manager. */
-	clrbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_DQSTRKEN_MASK);
+	ctrl_cfg = readl(&sdr_ctrl->ctrl_cfg);
+	writel(ctrl_cfg & ~SDR_CTRLGRP_CTRLCFG_DQSTRKEN_MASK,
+	       &sdr_ctrl->ctrl_cfg);
 
 	phy_mgr_initialize();
 	rw_mgr_mem_initialize();
@@ -3507,7 +3510,7 @@ static int run_mem_calibrate(void)
 	writel(0x2, &phy_mgr_cfg->mux_sel);
 
 	/* Start tracking manager. */
-	setbits_le32(&sdr_ctrl->ctrl_cfg, SDR_CTRLGRP_CTRLCFG_DQSTRKEN_MASK);
+	writel(ctrl_cfg, &sdr_ctrl->ctrl_cfg);
 
 	return pass;
 }
-- 
2.7.0