[U-Boot] [PATCH] mx6ul_evk: Remove SPL support

[Fabio Estevam]

Hi Eric,

On Tue, Apr 19, 2016 at 10:27 PM, Eric Nelson <eric at nelint.com> wrote:

> Interesting.
>
> Does the SanDisk card load using the full U-Boot?

If I switch to non-spl, then the SanDisk card succesfully load u-boot.imx.

> I'd suggest reviewing the pad settings and clock setup between
> the SPL and full U-Boot, but I suspect you've already done that.

Yes, I was not able to understand the cause for this SPL failure yet.

Regards,

Fabio Estevam