[U-Boot] [PATCH v3 2/2] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.

[Simon Glass]

On 18 March 2016 at 07:06, Purna Chandra Mandal
<purna.mandal at microchip.com> wrote:
> PIC32 internal flash devices are parallel NOR flash divided into
> number of banks to allow erase-programming in one while fetch and
> execution continues on other. As the flash banks are memory mapped
> stored code can be executed directly from flash (XIP), also there
> is additional hardware logic to prefetch and cache contents to
> improve execution performance. These flash can also be used to
> store user data (like environment).
> Flash erase and programming are handled by on-chip NVM controller.
>
> Driver implemented driver model but MTD is not really support.
>
> Signed-off-by: Purna Chandra Mandal <purna.mandal at microchip.com>
>
> ---
>
> Changes in v3:
> - add driver model support but MTD is not implemented
>
> Changes in v2:
> - kconfig: add CONFIG_FLASH_PIC32 dependent on MACH_PIC32
> - fix single/multi-line comment style
> - simplify byte-stream-to-word in little-endian format
> - replace virt_to_phys() with CPHYSADDR()
> - separate flash ID definition in different patch
>
>  drivers/mtd/Kconfig       |   7 +
>  drivers/mtd/Makefile      |   1 +
>  drivers/mtd/pic32_flash.c | 444 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 452 insertions(+)
>  create mode 100644 drivers/mtd/pic32_flash.c

Reviewed-by: Simon Glass <sjg at chromium.org>