[U-Boot] [PATCH] distro: Disable iso partition format for SPL

[Heiko Schocher]

Hello Alexander,

Am 25.04.2016 um 17:04 schrieb Alexander Graf:
> On 04/25/2016 05:03 PM, Heiko Schocher wrote:
>> Hello Alexander,
>>
>> Am 25.04.2016 um 14:55 schrieb Alexander Graf:
>>> When building an SPL binary, chances are quite slim that we need an
>>> iso partition label. However, there were reports of us exceeding our
>>> SPL memory limit with iso enabled.
>>>
>>> So for now, let's disable the ISO partition format code when in the
>>> SPL build.
>>>
>>> Reported-by: Heiko Schocher <hs at denx.de>
>>> Signed-off-by: Alexander Graf <agraf at suse.de>
>>> ---
>>>   include/config_distro_defaults.h | 5 ++++-
>>>   1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> Thanks for the fix!
>>
>> Acked-by: Heiko Schocher <hs at denx.de>
>
> Did you test and verify that this fixes the issue for you? My local compile was still too big, but I
> guess that's a toolchain difference thing :)

I tested this patch for an am335x port, I soon post to mainline. With
this patch, it compiled again clean for me.

Just tried the "igep0030_nand_defconfig" ... yes, it fails also with
this patch:

without your patch:
arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 1176 bytes

with it:
arm-linux-gnueabi-ld.bfd: region `.sram' overflowed by 272 bytes

So, your patch saves some bytes, but this fix seems valid for me, so I
acked it ... But it seems, there are more issues with this board ...

Ah, Tom already posted another fix, see:
http://patchwork.ozlabs.org/patch/614516/

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany