[U-Boot] [PATCH v3 1/7] armv8: fsl-layerscape: add i/d-cache enable function to enable_caches

[Zhiqiang Hou]

From: Hou Zhiqiang <Zhiqiang.Hou at freescale.com>

This function assume that the d-cache and MMU has been enabled earlier,
so it just created MMU table in main memory. But the assumption is not
always correct, for example, the early setup is done in EL3, while
enable_caches() is called when the PE has turned into another EL.

Define the function mmu_setup() for fsl-layerscape to cover the weak
one.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at freescale.com>
---
V3:
 - no change

 arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index d939900..672a453 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -425,15 +425,21 @@ int arch_cpu_init(void)
 	return 0;
 }
 
+void mmu_setup(void)
+{
+	final_mmu_setup();
+}
+
 /*
- * This function is called from lib/board.c.
- * It recreates MMU table in main memory. MMU and d-cache are enabled earlier.
- * There is no need to disable d-cache for this operation.
+ * This function is called from common/board_r.c.
+ * It recreates MMU table in main memory.
  */
 void enable_caches(void)
 {
-	final_mmu_setup();
+	mmu_setup();
 	__asm_invalidate_tlb_all();
+	icache_enable();
+	dcache_enable();
 }
 #endif
 
-- 
2.1.0.27.g96db324