[U-Boot] [PATCH 13/16] ARM: omap5: add hooks for cpu/SoC fdt fixups

[Lokesh Vutla]

On Tuesday 12 April 2016 05:07 AM, Daniel Allred wrote:
> Adds an fdt.c file in that defines the ft_cpu_setup() function,
> which should be called from a board-specific ft_board_setup()).
> This ft_cpu_setup() will currently do nothing for non-secure (GP)
> devices	but contains pertinent updates for booting on secure (HS)
> devices.
> 
> Update the omap5 Makefile to include the fdt.c in the build.

Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Thanks and regards,
Lokesh

> 
> Signed-off-by: Daniel Allred <d-allred at ti.com>
> Signed-off-by: Madan Srinivas <madans at ti.com>
> ---
>  arch/arm/cpu/armv7/omap5/Makefile |   1 +
>  arch/arm/cpu/armv7/omap5/fdt.c    | 183 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 184 insertions(+)
>  create mode 100644 arch/arm/cpu/armv7/omap5/fdt.c
> 
> diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile
> index f2930d5..3caba86 100644
> --- a/arch/arm/cpu/armv7/omap5/Makefile
> +++ b/arch/arm/cpu/armv7/omap5/Makefile
> @@ -12,4 +12,5 @@ obj-y	+= sdram.o
>  obj-y	+= prcm-regs.o
>  obj-y	+= hw_data.o
>  obj-y	+= abb.o
> +obj-y	+= fdt.o
>  obj-$(CONFIG_IODELAY_RECALIBRATION) += dra7xx_iodelay.o
> diff --git a/arch/arm/cpu/armv7/omap5/fdt.c b/arch/arm/cpu/armv7/omap5/fdt.c
> new file mode 100644
> index 0000000..f2f40f0
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/omap5/fdt.c
> @@ -0,0 +1,183 @@
> +/*
> + * Copyright 2016 Texas Instruments, Inc.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <libfdt.h>
> +#include <fdt_support.h>
> +#include <malloc.h>
> +
> +#include <asm/omap_common.h>
> +#include <asm/arch-omap5/sys_proto.h>
> +
> +#ifdef CONFIG_TI_SECURE_DEVICE
> +
> +/* Give zero values if not already defined */
> +#ifndef CONFIG_SECURE_BOOT_SRAM
> +#define CONFIG_SECURE_BOOT_SRAM (0)
> +#endif
> +#ifndef CONFIG_SECURE_RUN_SRAM
> +#define CONFIG_SECURE_RUN_SRAM (0)
> +#endif
> +
> +static u32 hs_irq_skip[] = {
> +	8,	/* Secure violation reporting interrupt */
> +	15,	/* One interrupt for SDMA by secure world */
> +	118	/* One interrupt for Crypto DMA by secure world */
> +};
> +
> +static int ft_hs_fixup_crossbar(void *fdt, bd_t *bd)
> +{
> +	const char *path;
> +	int offs;
> +	int ret;
> +	int len, i, old_cnt, new_cnt;
> +	u32 *temp;
> +	const u32 *p_data;
> +
> +	/*
> +	 * Increase the size of the fdt
> +	 * so we have some breathing room
> +	 */
> +	ret = fdt_increase_size(fdt, 512);
> +	if (ret < 0) {
> +		printf("Could not increase size of device tree: %s\n",
> +		       fdt_strerror(ret));
> +		return ret;
> +	}
> +
> +	/* Reserve IRQs that are used/needed by secure world */
> +	path = "/ocp/crossbar";
> +	offs = fdt_path_offset(fdt, path);
> +	if (offs < 0) {
> +		debug("Node %s not found.\n", path);
> +		return 0;
> +	}
> +
> +	/* Get current entries */
> +	p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len);
> +	if (p_data)
> +		old_cnt = len / sizeof(u32);
> +	else
> +		old_cnt = 0;
> +
> +	new_cnt = sizeof(hs_irq_skip) /
> +				sizeof(hs_irq_skip[0]);
> +
> +	/* Create new/updated skip list for HS parts */
> +	temp = malloc(sizeof(u32) * (old_cnt + new_cnt));
> +	for (i = 0; i < new_cnt; i++)
> +		temp[i] = cpu_to_fdt32(hs_irq_skip[i]);
> +	for (i = 0; i < old_cnt; i++)
> +		temp[i + new_cnt] = p_data[i];
> +
> +	/* Blow away old data and set new data */
> +	fdt_delprop(fdt, offs, "ti,irqs-skip");
> +	ret = fdt_setprop(fdt, offs, "ti,irqs-skip",
> +			  temp,
> +			  (old_cnt + new_cnt) * sizeof(u32));
> +	free(temp);
> +
> +	/* Check if the update worked */
> +	if (ret < 0) {
> +		printf("Could not add ti,irqs-skip property to node %s: %s\n",
> +		       path, fdt_strerror(ret));
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int ft_hs_disable_rng(void *fdt, bd_t *bd)
> +{
> +	const char *path;
> +	int offs;
> +	int ret;
> +
> +	/* Make HW RNG reserved for secure world use */
> +	path = "/ocp/rng";
> +	offs = fdt_path_offset(fdt, path);
> +	if (offs < 0) {
> +		debug("Node %s not found.\n", path);
> +		return 0;
> +	}
> +	ret = fdt_setprop_string(fdt, offs,
> +				 "status", "disabled");
> +	if (ret < 0) {
> +		printf("Could not add status property to node %s: %s\n",
> +		       path, fdt_strerror(ret));
> +		return ret;
> +	}
> +	return 0;
> +}
> +
> +#if (CONFIG_SECURE_BOOT_SRAM != 0) || (CONFIG_SECURE_RUN_SRAM != 0)
> +static int ft_hs_fixup_sram(void *fdt, bd_t *bd)
> +{
> +	const char *path;
> +	int offs;
> +	int ret;
> +	u32 temp[2];
> +
> +	/*
> +	 * Update SRAM reservations on secure devices. The OCMC RAM
> +	 * is always reserved for secure use from the start of that
> +	 * memory region
> +	 */
> +	path = "/ocp/ocmcram at 40300000/sram-hs";
> +	offs = fdt_path_offset(fdt, path);
> +	if (offs < 0) {
> +		debug("Node %s not found.\n", path);
> +		return 0;
> +	}
> +
> +	/* relative start offset */
> +	temp[0] = cpu_to_fdt32(0);
> +	/* reservation size */
> +	temp[1] = cpu_to_fdt32(max(CONFIG_SECURE_BOOT_SRAM,
> +				   CONFIG_SECURE_RUN_SRAM));
> +	fdt_delprop(fdt, offs, "reg");
> +	ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32));
> +	if (ret < 0) {
> +		printf("Could not add reg property to node %s: %s\n",
> +		       path, fdt_strerror(ret));
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +#else
> +static int ft_hs_fixup_sram(void *fdt, bd_t *bd) { return 0; }
> +#endif
> +
> +static void ft_hs_fixups(void *fdt, bd_t *bd)
> +{
> +	/* Check we are running on an HS/EMU device type */
> +	if (GP_DEVICE != get_device_type()) {
> +		if ((ft_hs_fixup_crossbar(fdt, bd) == 0) &&
> +		    (ft_hs_disable_rng(fdt, bd) == 0) &&
> +		    (ft_hs_fixup_sram(fdt, bd) == 0))
> +			return;
> +	} else {
> +		printf("ERROR: Incorrect device type (GP) detected!");
> +	}
> +	/* Fixup failed or wrong device type */
> +	hang();
> +}
> +#else
> +static void ft_hs_fixups(void *fdt, bd_t *bd)
> +{
> +}
> +#endif
> +
> +/*
> + * Place for general cpu/SoC FDT fixups. Board specific
> + * fixups should remain in the board files which is where
> + * this function should be called from.
> + */
> +void ft_cpu_setup(void *fdt, bd_t *bd)
> +{
> +	ft_hs_fixups(fdt, bd);
> +}
>