[U-Boot] [PATCH 12/16] ARM: zynq: Extend microzed board support
Michal Simek
michal.simek at xilinx.com
Thu Apr 7 19:01:31 CEST 2016
Add missing DT nodes and enable USB.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
arch/arm/dts/zynq-microzed.dts | 38 +++++++++++++++++++++++++++++++++++++-
configs/zynq_microzed_defconfig | 4 ++++
include/configs/zynq_microzed.h | 2 ++
3 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
index 793ab44eae24..cb238cd5e7bb 100644
--- a/arch/arm/dts/zynq-microzed.dts
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -1,7 +1,7 @@
/*
* Xilinx MicroZED board DTS
*
- * Copyright (C) 2013 Xilinx, Inc.
+ * Copyright (C) 2013 - 2016 Xilinx, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -15,12 +15,27 @@
aliases {
serial0 = &uart1;
spi0 = &qspi;
+ mmc0 = &sdhci0;
};
memory {
device_type = "memory";
reg = <0 0x40000000>;
};
+
+ chosen {
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
+ };
+
+ usb_phy0: phy0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+};
+
+&clkc {
+ ps-clk-frequency = <33333333>;
};
&qspi {
@@ -32,3 +47,24 @@
u-boot,dm-pre-reloc;
status = "okay";
};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy at 0 {
+ reg = <0>;
+ };
+};
+
+&sdhci0 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
index 1d70e43df0c8..bd261c16ebb0 100644
--- a/configs/zynq_microzed_defconfig
+++ b/configs/zynq_microzed_defconfig
@@ -21,3 +21,7 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_ZYNQ_GEM=y
CONFIG_ZYNQ_QSPI=y
+CONFIG_USB=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h
index e66088da4f79..ec7bb1cef553 100644
--- a/include/configs/zynq_microzed.h
+++ b/include/configs/zynq_microzed.h
@@ -12,6 +12,8 @@
#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ZYNQ_USB
+
#include <configs/zynq-common.h>
#endif /* __CONFIG_ZYNQ_MICROZED_H */
--
1.9.1
More information about the U-Boot
mailing list