[U-Boot] [PATCH v2 11/15] spl: build: ti: add support for secure boot images

Daniel Allred d-allred at ti.com
Wed Apr 27 22:09:15 CEST 2016


Updates the SPL build so that when CONFIG_TI_SECURE_DEVICE
is in use (which it should be when building for secure parts),
the TI secure development package is used to create a valid
secure boot image. The u-boot SPL build processes is NOT aware
of the details of creating the boot image - all of that information
is encapsulated in the TI secure development package, which is
available from TI. More info can be found in README.ti-secure

Right now, two image types are generated, MLO and X-LOADER. The types
are important, as certain boot modes implemented by the device's ROM
boot loader require one or the other (they are not equivalent). The
output filenames are u-boot-spl_HS_MLO and u-boot-spl_HS_X-LOADER. The
u-boot-spl_HS_MLO image is also copied to a file named MLO, which is
the name that the device ROM bootloader requires for loading from the
FAT partition of an SD card (same as on non-secure devices).

Signed-off-by: Daniel Allred <d-allred at ti.com>
Signed-off-by: Madan Srinivas <madans at ti.com>

Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>
Tested-by: Andreas Dannenberg <dannenberg at ti.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---

V2:
 None

 arch/arm/cpu/armv7/omap5/config.mk | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk
index ef2725a..a7e55a5 100644
--- a/arch/arm/cpu/armv7/omap5/config.mk
+++ b/arch/arm/cpu/armv7/omap5/config.mk
@@ -6,8 +6,14 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
+include  $(srctree)/$(CPUDIR)/omap-common/config_secure.mk
+
 ifdef CONFIG_SPL_BUILD
+ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
+ALL-y	+= u-boot-spl_HS_MLO u-boot-spl_HS_X-LOADER
+else
 ALL-y	+= MLO
+endif
 else
 ALL-y	+= u-boot.img
 endif
-- 
1.9.1



More information about the U-Boot mailing list