[U-Boot] [RFC PATCH 1/2] spl: Add an option to load a FIT containing U-Boot from FS

Lokesh Vutla lokeshvutla at ti.com
Thu Apr 14 07:17:12 CEST 2016


Hi Simon,

On Sunday 10 April 2016 12:05 AM, Simon Glass wrote:
> Hi Lokesh,
> 
> On 4 April 2016 at 22:30, Lokesh Vutla <lokeshvutla at ti.com> wrote:
>> This provides a way to load a FIT containing U-Boot and a selection of device
>> tree files from a File system.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
>> ---
>>  common/spl/spl_fit.c | 96 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>>  include/spl.h        |  5 +++
>>  2 files changed, 101 insertions(+)
>>
>> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
>> index 1a5c027..4c9fe7b 100644
>> --- a/common/spl/spl_fit.c
>> +++ b/common/spl/spl_fit.c
>> @@ -192,3 +192,99 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fit)
>>
>>         return 0;
>>  }
>> +
>> +int spl_fs_load_simple_fit(struct spl_load_info *info, const char *filename, void *fit)
>> +{
>> +       ulong size, load;
>> +       unsigned long count;
>> +       int node, images;
>> +       void *load_ptr;
>> +       int fdt_offset, fdt_len;
>> +       int data_offset, data_size, file_offset;
>> +       int base_offset = 0, align_len;
>> +       void *dst;
>> +
>> +       /*
>> +        * Figure out where the external images start. This is the base for the
>> +        * data-offset properties in each image.
>> +        */
>> +       size = fdt_totalsize(fit);
>> +       size = (size + 3) & ~3;
>> +       base_offset = (size + 3) & ~3;
> 
> Can you please refactor this to share code with spl_load_simple_fit()
> where possible?

Sure.

> 
>> +
>> +       /*
>> +        * Read the entire FIT header, placing it so it finishes before
>> +        * where we will load the image. Also the load address is aligned
>> +        * ARCH_DMA_MINALIGN.
>> +        */
>> +       align_len = ARCH_DMA_MINALIGN - 1;
>> +       fit = (void *)((CONFIG_SYS_TEXT_BASE - size - align_len) & ~align_len);
>> +       debug("FIT header read: destination = 0x%p, size = %lx \n", fit, size);
>> +       count = info->fs_read(info, filename, fit, 0, size);
>> +       if (count <= 0)
>> +               return -EIO;
>> +
>> +       /* find the firmware image to load */
>> +       images = fdt_path_offset(fit, FIT_IMAGES_PATH);
>> +       if (images < 0) {
>> +               printf("%s: Cannot find /images node: %d\n", __func__, images);
>> +               return -1;
>> +       }
>> +       node = fdt_first_subnode(fit, images);
>> +       if (node < 0) {
>> +               printf("%s: Cannot find first image node: %d\n", __func__, node);
>> +               return -1;
>> +       }
>> +
>> +       /* Get its information and set up the spl_image structure */
>> +       data_offset = fdt_getprop_u32(fit, node, "data-offset");
>> +       data_size = fdt_getprop_u32(fit, node, "data-size");
>> +       load = fdt_getprop_u32(fit, node, "load");
>> +       debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
>> +       spl_image.load_addr = load;
>> +       spl_image.entry_point = load;
>> +       spl_image.os = IH_OS_U_BOOT;
>> +
>> +       /*
>> +        * Work out where to place the image. Assuming load addr of u-boot.bin
>> +        * is always aligned to ARCH_DMA_MINALIGN. It is possible that file
>> +        * offset is not aligned. In order to make sure that the file read is
>> +        * dma aligned, align the file offset to dma with extra bytes in the
>> +        * beginning. Then do a memcpy of image to dst.
>> +        */
>> +       data_offset += base_offset;
>> +       file_offset = data_offset & ~align_len;
>> +       load_ptr = (void *)load;
>> +       dst = load_ptr;
>> +
>> +       /* Read the image */
>> +       debug("Temp u-boot.bin read from fit: dst = 0x%p, file offset = 0x%x, size = 0x%x\n",
>> +             dst, file_offset, data_size);
>> +       count = info->fs_read(info, filename, dst, file_offset, data_size);
>> +       if (count <= 0)
>> +               return -EIO;
>> +       debug("u-boot.bin load: dst = 0x%p, size = 0x%x\n", dst, data_size);
>> +       memcpy(dst, dst + (data_offset & align_len), data_size);
>> +
>> +       /* Figure out which device tree the board wants to use */
>> +       fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset);
>> +       if (fdt_len < 0)
>> +               return fdt_len;
>> +
>> +       /*
>> +        * Read the device tree and place it after the image. Making sure that
>> +        * load addr and file offset are aligned to dma.
>> +        */
>> +       dst = (void *)((load + data_size + align_len) & ~align_len);
>> +       fdt_offset += base_offset;
>> +       file_offset = fdt_offset & ~align_len;
>> +       debug("Temp fdt read from fit: dst = 0x%p, file offset = 0x%x, size = %d\n",
>> +             dst, file_offset, data_size);
>> +       count = info->fs_read(info, filename, dst, file_offset, data_size);
>> +       if (count <= 0)
>> +               return -EIO;
>> +       debug("fdt load: dst = 0x%p, size = 0x%x\n", load_ptr + data_size, data_size);
>> +       memcpy(load_ptr + data_size, dst + (fdt_offset & align_len), data_size);
>> +
>> +       return 1;
>> +}
>> diff --git a/include/spl.h b/include/spl.h
>> index de4f70a..276ca12 100644
>> --- a/include/spl.h
>> +++ b/include/spl.h
>> @@ -36,6 +36,7 @@ struct spl_image_info {
>>   * @priv: Private data for the device
>>   * @bl_len: Block length for reading in bytes
>>   * @read: Function to call to read from the device
>> + * @fd_read: Function to call to read from the a fs
>>   */
>>  struct spl_load_info {
>>         void *dev;
>> @@ -43,9 +44,13 @@ struct spl_load_info {
>>         int bl_len;
>>         ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
>>                       void *buf);
>> +       int (*fs_read)(struct spl_load_info *load, const char *filename,
>> +                     void *buf, ulong file_offset, ulong size);
>>  };
>>
>>  int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fdt);
>> +int spl_fs_load_simple_fit(struct spl_load_info *info, const char *filename,
>> +                          void *fit);
> 
> Please add a function comment (which apparently I missed also :-)

Will add it in next version.

Just posted an updated series :)

Thanks and regards,
Lokesh

> 
>>
>>  #define SPL_COPY_PAYLOAD_ONLY  1
>>
>> --
>> 2.1.4
>>
> Regards,
> Simon
> 


More information about the U-Boot mailing list