[U-Boot] [PATCH v2] x86: som-db5800-som-6867: fix SERIRQ on reset

[Bin Meng]

On Thu, Jul 28, 2016 at 10:49 PM, George McCollister
<george.mccollister at gmail.com> wrote:
> Explicitly enable ILB_SERIRQ function 1 in
> cfio_regs_pad_ilb_serirq_PCONF0.
>
> Pad configuration for SERIRQ is not set to enable the SERIRQ function
> after a reset though strangely, it is on initial boot.
>
> Rebooting from Linux, reset command in u-boot and even pushing the reset
> button on the development board all lead to the SERIRQ function being
> disabled (address 0xfed0c560 with value of 0x2003cc80).
>
> Signed-off-by: George McCollister <george.mccollister at gmail.com>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>
> Changes in v2:
>  - Reword commit message
>
>  arch/x86/dts/baytrail_som-db5800-som-6867.dts | 6 ++++++
>  1 file changed, 6 insertions(+)
>

applied to u-boot-x86, thanks!