August 2016 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Mon Aug 1 01:20:00 CEST 2016
Ending: Wed Aug 31 23:43:00 CEST 2016
Messages: 2998

[U-Boot] [U-Boot, RFC] vexpress: Check TC2 firmware support before defaulting to nonsec booting Jon Medhurst (Tixy)
[U-Boot] [PATCH 01/10] dm: imx: serial: support device tree Stefan Agner
[U-Boot] [PATCH v2 00/10] mx7: add dt support for Colibri iMX7S/iMX7D Stefan Agner
[U-Boot] [PATCH v2 01/10] dm: imx: serial: support device tree Stefan Agner
[U-Boot] [PATCH v2 02/10] pinctrl: imx: do not announce driver initialization Stefan Agner
[U-Boot] [PATCH v2 03/10] arm: dts: imx7: add pinctrl defines Stefan Agner
[U-Boot] [PATCH v2 04/10] arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree Stefan Agner
[U-Boot] [PATCH v2 05/10] colibri_imx7: remove legancy I2C support Stefan Agner
[U-Boot] [PATCH v2 06/10] colibri_imx7: remove legancy UART platform data Stefan Agner
[U-Boot] [PATCH v2 07/10] power: pmic: add Ricoh RN5T567 PMIC support Stefan Agner
[U-Boot] [PATCH v2 08/10] arm: dts: imx7: add Ricoh RN5T567 PMIC node Stefan Agner
[U-Boot] [PATCH v2 09/10] colibri_imx7: use Ricoh RN5T567 to reboot the board Stefan Agner
[U-Boot] [PATCH v2 10/10] configs: enable device tree for Colibri iMX7 Stefan Agner
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Stefan Agner
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Stefan Agner
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Stefan Agner
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Stefan Agner
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Stefan Agner
[U-Boot] [PATCH] ARM: non-sec: flush code cacheline aligned Stefan Agner
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Stefan Agner
[U-Boot] [PATCH v2] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Stefan Agner
[U-Boot] [PATCH v3] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Stefan Agner
[U-Boot] [PATCH v3] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH v4] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model Stefan Agner
[U-Boot] [PATCH v4] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [RFC: v2] tools/env: ensure environment starts at erase block boundary Stefan Agner
[U-Boot] FIT image without relocation Stefan Agner
[U-Boot] [PATCH v4] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] [PATCH v5 1/2] arm: cache: add support for LPAE for region D$ behavior Stefan Agner
[U-Boot] [PATCH v5 2/2] arm: cache: always flush cache line size for page table Stefan Agner
[U-Boot] cmd: net: flush cache cacheline aligned Stefan Agner
[U-Boot] [RFC] mmc: fsl_esdhc: fix misaligned cache operation warning Stefan Agner
[U-Boot] [PATCH 01/10] dm: imx: serial: support device tree Stefan Agner
[U-Boot] [PATCH] gunzip: cache-align write buffer memory Stefan Agner
[U-Boot] [PATCH] MAINTAINERS, git-mailrc: Update the mmc maintainer Pantelis Antoniou
[U-Boot] [GIT] Pull request: u-boot-dfu B, Ravi
[U-Boot] [GIT] Pull request: u-boot-dfu B, Ravi
[U-Boot] [GIT] Pull request: u-boot-dfu B, Ravi
[U-Boot] [RFC v1 PATCH] ARM7: Kconfig: cache: fix cacheline size based on arm type B, Ravi
[U-Boot] 2016.07 regression: kwboot does not work on Kirkwood Simon Baatz
[U-Boot] [PATCH] tools: kwboot: patch destaddr only for SoCs with header version 1 Simon Baatz
[U-Boot] [PATCH v2] tools: kwboot: patch destaddr only for SoCs with header version 1 Simon Baatz
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Stefano Babic
[U-Boot] [PATCH v4] nitrogen6x : Use generic distro configuration Stefano Babic
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Stefano Babic
[U-Boot] [PATCH] mx7dsabresd: Print secure/non-secure mode info Stefano Babic
[U-Boot] Help Falcon Mode on Wanboard Stefano Babic
[U-Boot] [PATCH 01/21] imx: mx6ull: add iomux header file Stefano Babic
[U-Boot] [PATCH 02/21] imx: mx6ull: add mx6ull major cpu type Stefano Babic
[U-Boot] [PATCH 06/21] imx: timer: update gpt driver for i.MX6ULL Stefano Babic
[U-Boot] [PATCH 07/21] imx: mx6ull: skip setting ahb clock Stefano Babic
[U-Boot] [PATCH 08/21] imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ Stefano Babic
[U-Boot] Help Falcon Mode on Wanboard Stefano Babic
[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size" Stefano Babic
[U-Boot] [PATCH] ARM: board: cm_fx6: fix mtd partition fixup Stefano Babic
[U-Boot] [PATCH] warp: Fix RAM size runtime detection Stefano Babic
[U-Boot] [PATCH] warp7: Add PMIC support Stefano Babic
[U-Boot] [PATCH 00/10] mx7: add dt support for Colibri iMX7S/iMX7D Stefano Babic
[U-Boot] [PATCH] mx6ul_14x14_evk: don't use array for SD2 card detect pad Stefano Babic
[U-Boot] [PATCH] imx: mx7dsabresd: consolidate BOOT_FROM Stefano Babic
[U-Boot] [PATCH 00/21] imx: support i.MX6ULL and EVK board Stefano Babic
[U-Boot] [PATCH] imx: mx7dsabresd: consolidate BOOT_FROM Stefano Babic
[U-Boot] [PATCH 01/10] dm: imx: serial: support device tree Stefano Babic
[U-Boot] [PATCH] imx: mx7dsabresd: consolidate BOOT_FROM Stefano Babic
[U-Boot] [RFC v1 PATCH] ARM7: Kconfig: cache: fix cacheline size based on arm type Ravi Babu
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Alban Bedel
[U-Boot] [PATCH 1/4] eth: asix88179: Add VID:DID for Cypress GX3 USB Ethernet Adapter Alban Bedel
[U-Boot] [PATCH 2/4] eth: asix88179: Fix receiving on big endian system Alban Bedel
[U-Boot] [PATCH 3/4] eth: asix88179: Prepare supporting the driver model Alban Bedel
[U-Boot] [PATCH 4/4] eth: asix88179: Add support for the driver model Alban Bedel
[U-Boot] [PATCH] net: e1000: Fix the build with driver model and SPI EEPROM Alban Bedel
[U-Boot] [PATCH] tegra: config: Add 'pci enum' to preboot when PCI is enabled Alban Bedel
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Alban Bedel
[U-Boot] [PATCH v2] eth: asix88179: Add support for the driver model Alban Bedel
[U-Boot] [PATCH] tegra: config: Add 'pci enum' to preboot when PCI is enabled Alban Bedel
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Alban Bedel
[U-Boot] [PATCH] net: e1000: Allow to use e1000 SPI command with DM Alban Bedel
[U-Boot] [PATCH v3 1/2] eth: asix88179: Prepare supporting the driver model Alban Bedel
[U-Boot] [PATCH v3 2/2] eth: asix88179: Add support for the driver model Alban Bedel
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Alban Bedel
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Alban Bedel
[U-Boot] [PATCH] mkimage: Fix argument parsing with signature comment Karl Beldan
[U-Boot] [PATCH] configs: Fix mmc rescan misuses Karl Beldan
[U-Boot] [PATCH] mkimage: Fix argument parsing with signature comment Karl Beldan
[U-Boot] [PATCH v2] mkimage: Fix argument parsing with signature comment Karl Beldan
[U-Boot] [PATCH 1/3] net: davinci_emac: Remove useless dcache ops on descriptors Karl Beldan
[U-Boot] [PATCH 2/3] net: davinci_emac: Round up top buffer boundaries for dcache ops Karl Beldan
[U-Boot] [PATCH 3/3] net: davinci_emac: Invalidate only the received portion of a buffer Karl Beldan
[U-Boot] [PATCH 2/3] net: davinci_emac: Round up top buffer boundaries for dcache ops Karl Beldan
[U-Boot] [PATCH 2/3] net: davinci_emac: Round up top buffer boundaries for dcache ops Karl Beldan
[U-Boot] [PATCH v2 0/2] davinci emac dcache ops on buffers Karl Beldan
[U-Boot] [PATCH v2 1/2] net: davinci_emac: Round up top tx buffer boundaries for dcache ops Karl Beldan
[U-Boot] [PATCH v2 2/2] net: davinci_emac: Invalidate only the received portion of a buffer Karl Beldan
[U-Boot] [PATCH v2 0/5] Remove calls from net drivers to legacy miiphy_register() entry-point Karl Beldan
[U-Boot] [PATCH] net: davinci_emac: Restore the internal MDIO accessors return values Karl Beldan
[U-Boot] [PATCH v2 0/5] Remove calls from net drivers to legacy miiphy_register() entry-point Karl Beldan
[U-Boot] [PATCH v2 0/3] Add USB EHCI support for ls1012aqds Rajesh Bhagat
[U-Boot] [PATCH] Please pull u-boot-mmc Andreas Bießmann
[U-Boot] [PATCH] mmc: sdhci: Add the programmable clock mode support Andreas Bießmann
[U-Boot] [PATCH] image-fit: fix fit_image_load() OS check Andreas Bießmann
[U-Boot] [PATCH] tpm: atmel_twi: Make compatible with DM I2C busses Andreas Bießmann
[U-Boot] [PATCH] image-fit: fix fit_image_load() OS check Andreas Bießmann
[U-Boot] [PATCH] clk.h: inline clk_get_by_name() Andreas Bießmann
[U-Boot] [U-Boot,v3,1/2] i2c: atmel: add i2c driver Andreas Bießmann
[U-Boot] [U-Boot,v3,2/2] i2c: atmel: DT binding for i2c driver Andreas Bießmann
[U-Boot] tpm: atmel_twi: Make compatible with DM I2C busses Andreas Bießmann
[U-Boot] [U-Boot,v5] clk: at91: Add clock driver Andreas Bießmann
[U-Boot] [U-Boot, v7, 1/4] gpio: atmel_pio4: Move PIO4 definitions to head file Andreas Bießmann
[U-Boot] [U-Boot, v7, 2/4] gpio: atmel_pio4: Rework to support DM & DT Andreas Bießmann
[U-Boot] [U-Boot, v7, 3/4] pinctrl: at91-pio4: Add pinctrl driver Andreas Bießmann
[U-Boot] [U-Boot, v7, 4/4] atmel: Bring in at91 pio4 device tree file and bindings Andreas Bießmann
[U-Boot] ARM: at91/dt: Add device tree for SAMA5D2 Xplained Andreas Bießmann
[U-Boot] [U-Boot, RESEND, v3] dm: atmel: Add driver model support for the ehci driver Andreas Bießmann
[U-Boot] [U-Boot, v11] mmc: atmel_sdhci: Convert to the driver model support Andreas Bießmann
[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Andreas Bießmann
[U-Boot] Boot failure with a AT91RM9200 based custom board Andreas Bießmann
[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Andreas Bießmann
[U-Boot] [U-Boot, RESEND, v3] dm: atmel: Add driver model support for the ehci driver Andreas Bießmann
[U-Boot] clk.h: inline clk_get_by_name() Andreas Bießmann
[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Andreas Bießmann
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Andreas Bießmann
[U-Boot] Boot failure with a AT91RM9200 based custom board Andreas Bießmann
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Andreas Bießmann
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Andreas Bießmann
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Andreas Bießmann
[U-Boot] [ANN] U-Boot v2016.09-rc2 released Andreas Bießmann
[U-Boot] [PATCH 0/3] Add i.MX HAB encryption support Gary Bisson
[U-Boot] [PATCH 1/3] arm: imx-common: add SECURE_BOOT option to Kconfig Gary Bisson
[U-Boot] [PATCH 2/3] arm: imx-common: introduce back usec2ticks Gary Bisson
[U-Boot] [PATCH 3/3] nitrogen6x: add secure boot support Gary Bisson
[U-Boot] [PATCH 1/3] arm: imx-common: add SECURE_BOOT option to Kconfig Gary Bisson
[U-Boot] [PATCH 2/3] arm: imx-common: introduce back usec2ticks Gary Bisson
[U-Boot] [PATCH 3/3] nitrogen6x: add secure boot support Gary Bisson
[U-Boot] [PATCH v2 0/5] Add i.MX HAB encryption support Gary Bisson
[U-Boot] [PATCH v2 1/5] arm: imx-common: add SECURE_BOOT option to Kconfig Gary Bisson
[U-Boot] [PATCH v2 2/5] arm: imx-common: introduce back usec2ticks Gary Bisson
[U-Boot] [PATCH v2 3/5] mx6_common: add secure boot support Gary Bisson
[U-Boot] [PATCH v2 4/5] mx7_common: add secure boot support Gary Bisson
[U-Boot] [PATCH v2 5/5] nitrogen6x: add secure boot support Gary Bisson
[U-Boot] [PATCH] arm: omap5: am57/dra7: Fix SRAM_SCRATCH_SPACE_ADDR and SRAM_ROM_VECT_BASE Andrew Bradford
[U-Boot] EFI Stub compilation errors Robert Bray
[U-Boot] EFI Stub compilation errors Robert Bray
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Boris Brezillon
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Boris Brezillon
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Boris Brezillon
[U-Boot] [PATCH 1/3] usb: add CONIFG_USB_OHCI_HCD in Kconfig Alexey Brodkin
[U-Boot] [PATCH] arc: Add debug messages during relocation fixups Alexey Brodkin
[U-Boot] [PATCH] arc: Update exception & interrupt handling for ARCv2 Alexey Brodkin
[U-Boot] [PATCH] arc: No need in sections defined in sources with newer tools Alexey Brodkin
[U-Boot] [PATCH] arc: Rename ARCangel4 board to nSIM Alexey Brodkin
[U-Boot] [PATCH] arc: Rename AXS101 board to more generic AXS10x Alexey Brodkin
[U-Boot] [PATCH] arc: Rename AXS101 board to more generic AXS10x Alexey Brodkin
[U-Boot] Please pull ARC changes Alexey Brodkin
[U-Boot] [PATCH] arc: Add debug messages during relocation fixups Alexey Brodkin
[U-Boot] [PATCH] arc: Update exception & interrupt handling for ARCv2 Alexey Brodkin
[U-Boot] [PATCH] arc: No need in sections defined in sources with newer tools Alexey Brodkin
[U-Boot] [PATCH] arc: Rename ARCangel4 board to nSIM Alexey Brodkin
[U-Boot] [PATCH] arc: Rename AXS101 board to more generic AXS10x Alexey Brodkin
[U-Boot] [RFC PATCH 3/4] ext4: fix endianess problems in ext4 write support Stefan Bruens
[U-Boot] [PATCH] ext4: fix possible crash on directory traversal, ignore deleted entries Stefan Bruens
[U-Boot] [Bug] Crash when running "./sandbox/u-boot -c done" Stefan Bruens
[U-Boot] [PATCH v2 5/5] ext4: optimize direntlen loops Stefan Bruens
[U-Boot] [PATCH 0/4] Some additions for sandbox and fs tests Stefan Brüns
[U-Boot] [PATCH 1/4] Sandbox: document support of block device emulation Stefan Brüns
[U-Boot] [PATCH 2/4] sandbox: Add "host size" hostfs command for fs test Stefan Brüns
[U-Boot] [PATCH 3/4] test/fs: strip carriage-return from sandbox output Stefan Brüns
[U-Boot] [PATCH 4/4] test/fs: replace deprecated "sb" command with "host" Stefan Brüns
[U-Boot] [PATCH 0/3 v2] Some additions for sandbox and fs tests Stefan Brüns
[U-Boot] [PATCH 1/3 v2] Sandbox: document support of block device emulation Stefan Brüns
[U-Boot] [PATCH 2/3 v2] sandbox: Add "host size" hostfs command for fs test Stefan Brüns
[U-Boot] [PATCH 3/3 v2] test/fs: strip carriage-return from sandbox output Stefan Brüns
[U-Boot] [PATCH] ext4: fix possible crash on directory traversal, ignore deleted entries Stefan Brüns
[U-Boot] [PATCH 0/3] Fix several possible crashes/corruptions in ext4 Stefan Brüns
[U-Boot] [PATCH 1/3 v2] ext4: fix possible crash on directory traversal, ignore deleted entries Stefan Brüns
[U-Boot] [PATCH 2/3] ext4: propagate error if creation of directory entry fails Stefan Brüns
[U-Boot] [PATCH 3/3] ext4: Do not crash when trying to grow a directory using extents Stefan Brüns
[U-Boot] [RFC PATCH 3/4] ext4: fix endianess problems in ext4 write support Brüns, Stefan
[U-Boot] [PATCH 0/2] ext4: more fixes for possible file system corruption Stefan Brüns
[U-Boot] [PATCH 1/2] ext4: Avoid corruption of directories with hash tree indexes Stefan Brüns
[U-Boot] [PATCH 2/2] ext4: scan all directory blocks when looking up an entry Stefan Brüns
[U-Boot] [PATCH v3 00/13] Fix several possible crashes/corruptions in ext4 Stefan Brüns
[U-Boot] [PATCH v3 01/13] ext4: fix possible crash on directory traversal, ignore deleted entries Stefan Brüns
[U-Boot] [PATCH v3 02/13] ext4: propagate error if creation of directory entry fails Stefan Brüns
[U-Boot] [PATCH v3 03/13] ext4: Do not crash when trying to grow a directory using extents Stefan Brüns
[U-Boot] [PATCH v3 04/13] ext4: Scan all directory blocks for space when inserting a new entry Stefan Brüns
[U-Boot] [PATCH v3 05/13] ext4: Avoid corruption of directories with hash tree indexes Stefan Brüns
[U-Boot] [PATCH v3 06/13] ext4: scan all directory blocks when looking up an entry Stefan Brüns
[U-Boot] [PATCH v3 07/13] ext4: only update number of of unused inodes if GDT_CSUM feature is set Stefan Brüns
[U-Boot] [PATCH v3 08/13] ext4: do not clear zalloc'ed buffers a second time Stefan Brüns
[U-Boot] [PATCH v3 09/13] ext4: After completely filled group, scan next group from the beginning Stefan Brüns
[U-Boot] [PATCH v3 10/13] ext4: Avoid out-of-bounds access of block bitmap Stefan Brüns
[U-Boot] [PATCH v3 11/13] ext4: Fix memory leak in case of failure Stefan Brüns
[U-Boot] [PATCH v3 12/13] ext4: Use correct value for inode size even on revision 0 filesystems Stefan Brüns
[U-Boot] [PATCH v3 13/13] ext4: initialize full inode for inodes bigger than 128 bytes Stefan Brüns
[U-Boot] [PATCH v4 00/11] MIPS Boston Development Board Support Paul Burton
[U-Boot] [PATCH v4 01/11] serial: ns16550: Support clocks via phandle Paul Burton
[U-Boot] [PATCH v4 02/11] dt-bindings: Add interrupt-controller/mips-gic.h header Paul Burton
[U-Boot] [PATCH v4 03/11] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge Paul Burton
[U-Boot] [PATCH v4 04/11] pci: Flip condition for detecting non-PCI parent devices Paul Burton
[U-Boot] [PATCH v4 05/11] net: pch_gbe: Use dm_pci_map_bar to discover MMIO base Paul Burton
[U-Boot] [PATCH v4 06/11] net: pch_gbe: Make 64 bit safe Paul Burton
[U-Boot] [PATCH v4 07/11] dm: regmap: Implement simple regmap_read & regmap_write Paul Burton
[U-Boot] [PATCH v4 08/11] dm: core: Match compatible strings in order of priority Paul Burton
[U-Boot] [PATCH v4 09/11] dm: syscon: Provide a generic syscon driver Paul Burton
[U-Boot] [PATCH v4 10/11] clk: boston: Providea simple driver for Boston board clocks Paul Burton
[U-Boot] [PATCH v4 11/11] boston: Introduce support for the MIPS Boston development board Paul Burton
[U-Boot] [PATCH v2 08/10] dm: syscon: Provide a generic syscon driver Paul Burton
[U-Boot] [PATCH v4 00/11] MIPS Boston Development Board Support Paul Burton
[U-Boot] [PATCH v4 00/11] MIPS Boston Development Board Support Paul Burton
[U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board Paul Burton
[U-Boot] [PATCH v5 11/11] boston: Introduce support for the MIPS Boston development board Paul Burton
[U-Boot] [PATCH v4 01/11] serial: ns16550: Support clocks via phandle Paul Burton
[U-Boot] [PATCH v4 00/11] MIPS Boston Development Board Support Paul Burton
[U-Boot] [PATCH v4 03/11] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge Paul Burton
[U-Boot] [PATCH v6 00/12] MIPS Boston Development Board Support Paul Burton
[U-Boot] [PATCH v6 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Paul Burton
[U-Boot] [PATCH v6 02/12] serial: ns16550: Support clocks via phandle Paul Burton
[U-Boot] [PATCH v6 03/12] dt-bindings: Add interrupt-controller/mips-gic.h header Paul Burton
[U-Boot] [PATCH v6 04/12] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge Paul Burton
[U-Boot] [PATCH v6 05/12] pci: Flip condition for detecting non-PCI parent devices Paul Burton
[U-Boot] [PATCH v6 06/12] net: pch_gbe: Use dm_pci_map_bar to discover MMIO base Paul Burton
[U-Boot] [PATCH v6 07/12] net: pch_gbe: Make 64 bit safe Paul Burton
[U-Boot] [PATCH v6 08/12] dm: regmap: Implement simple regmap_read & regmap_write Paul Burton
[U-Boot] [PATCH v6 09/12] dm: core: Match compatible strings in order of priority Paul Burton
[U-Boot] [PATCH v6 10/12] dm: syscon: Provide a generic syscon driver Paul Burton
[U-Boot] [PATCH v6 11/12] clk: boston: Providea simple driver for Boston board clocks Paul Burton
[U-Boot] [PATCH v6 12/12] boston: Introduce support for the MIPS Boston development board Paul Burton
[U-Boot] [PATCH v6 07/12] net: pch_gbe: Make 64 bit safe Paul Burton
[U-Boot] [PATCH v6 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Paul Burton
[U-Boot] [PATCH v3] common: cli_readline: Improve command line editing James Byrne
[U-Boot] rockchip: SecureBoot Support? Eddie Cai
[U-Boot] Wrong Image Format for bootm command Ottavio Campana
[U-Boot] [PATCH] ARM: dts: sun6i: Add defconfig and dts file for tablets using the inet-q972 PCB Ian Campbell
[U-Boot] [PATCH] sunxi: Sync dts files with upstream kernel Ian Campbell
[U-Boot] [PATCH 0/2] Fixes and simplification to omap3_pandora boot configuration Vagrant Cascadian
[U-Boot] [PATCH 1/2] omap3_pandora: Fix mmc loading of autoboot script to use correct syntax. Vagrant Cascadian
[U-Boot] [PATCH 2/2] omap3_pandora: Switch to using "load" command to load the autoboot script. Vagrant Cascadian
[U-Boot] [PATCH 0/2] Add support for config_distro_bootcmd to the omap3_pandora target. Vagrant Cascadian
[U-Boot] [PATCH 1/2] omap3_pandora: Switch to use config_distro_bootcmd. Vagrant Cascadian
[U-Boot] [PATCH 2/2] omap3_pandora: Only set bootargs if distro_bootcmd failed to load. Vagrant Cascadian
[U-Boot] An anomaly in image booting code Champ, Andy
[U-Boot] OpenSSL/evp.h fatal error Rama Chandra
[U-Boot] A command to discard saved environments? James Chargin
[U-Boot] A command to discard saved environments? James Chargin
[U-Boot] [PATCH] rockchip: rk3288-firefly: enable boot from eMMC Jacob Chen
[U-Boot] [PATCH v1] rockchip: rk3288-firefly: enable boot from eMMC Jacob Chen
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Jacob Chen
[U-Boot] [PATCH 2/3] rockchip: add usb mass storage feature support for rk3036 Jacob Chen
[U-Boot] [PATCH 3/3] rockchip: use rockchip linux partitions map Jacob Chen
[U-Boot] tegra124 jetson-tk1 ethernet problems. Peter Chubb
[U-Boot] [ARM] RFC: Add board support for Colorado Engineering TK1-SOM Peter Chubb
[U-Boot] ARM: tegra: jetson-tk1: Increase console buffer size Peter Chubb
[U-Boot] [PATCH] ARM: tegra: increase console buffer size and sys args num Peter Chubb
[U-Boot] [PATCH] ARM: tegra: increase console buffer size and sys args num Peter Chubb
[U-Boot] [ARM] RFC: Add board support for Colorado Engineering TK1-SOM Peter Chubb
[U-Boot] [PATCH] MAINTAINERS, git-mailrc: Update the mmc maintainer Jaehoon Chung
[U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards Jaehoon Chung
[U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards Jaehoon Chung
[U-Boot] [PATCH] mmc: s5p_sdhci: support the Driver model for Exynos Jaehoon Chung
[U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg Jaehoon Chung
[U-Boot] [PATCH 2/2] mmc: sdhci: remove the unnecessary argumetns for sdhci_setup_cfg Jaehoon Chung
[U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg Jaehoon Chung
[U-Boot] [U-Boot,v3] mmc: add mmc partconf read capability Jaehoon Chung
[U-Boot] [U-Boot, 1/3] mmc: fsl: reset to normal boot mode when eMMC fast boot Jaehoon Chung
[U-Boot] [U-Boot,1/2] mmc: Add Amlogic Meson driver Jaehoon Chung
[U-Boot] [PATCH v2 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg Jaehoon Chung
[U-Boot] [PATCH v2 2/2] mmc: sdhci: remove the unnecessary arguments for sdhci_setup_cfg Jaehoon Chung
[U-Boot] [U-Boot,v2] mmc: sdhci: clean up timeout detection Jaehoon Chung
[U-Boot] [U-Boot, 1/2] mmc: sdhci: set to INT_DATA_END when there are data Jaehoon Chung
[U-Boot] [U-Boot, 2/2] mmc: s5p_sdhci: unset the SDHCI_QUIRK_BROKEN_R1B Jaehoon Chung
[U-Boot] [U-Boot, 1/3] mmc: dw_mmc: remove the duplicated header file Jaehoon Chung
[U-Boot] [U-Boot, 2/3] mmc: fsl_esdhc: remove the duplcated header file Jaehoon Chung
[U-Boot] [U-Boot,3/3] mmc: use the generic error number Jaehoon Chung
[U-Boot] [U-Boot, v3] mmc: display mmc list information like mmc_legacy type Jaehoon Chung
[U-Boot] mmc: sdhci: revert "mmc: sdhci: Claer high speed if not supported" Jaehoon Chung
[U-Boot] [U-Boot, 1/2] mmc: dw_mmc: transfer proper bytes to FIFO Jaehoon Chung
[U-Boot] [U-Boot, 2/2] mmc: dw_mmc: fix data starvation by host timeout under FIFO mode Jaehoon Chung
[U-Boot] mmc: dw_mmc: fix the wrong Mask bit boundary for fifo_count bit Jaehoon Chung
[U-Boot] [PATCH] mmc: sdhci: fix the compiler warning when disable CONFIG_MMC_SDMA Jaehoon Chung
[U-Boot] [PATCH] mmc: sdhci: fix the compiler warning when disable CONFIG_MMC_SDMA Jaehoon Chung
[U-Boot] [PATCH RESEND] mmc: sdhci: fix the compiler warning when disable CONFIG_MMC_SDMA Jaehoon Chung
[U-Boot] [PATCH] Please pull u-boot-mmc Jaehoon Chung
[U-Boot] [U-Boot, 1/3] mmc: fsl: reset to normal boot mode when eMMC fast boot Jaehoon Chung
[U-Boot] [v2] mmc: send CMD0 before CMD1 for some MMC cards Jaehoon Chung
[U-Boot] [PATCH v10] mmc: atmel_sdhci: Convert to the driver model support Jaehoon Chung
[U-Boot] [PATCH v11] mmc: atmel_sdhci: Convert to the driver model support Jaehoon Chung
[U-Boot] [PATCH] mmc: mmc_legacy: fix the compiler error with disabled CONFIG_DM_MMC_OPS Jaehoon Chung
[U-Boot] [PATCH] mmc: mmc_legacy: fix the compiler error with disabled CONFIG_DM_MMC_OPS Jaehoon Chung
[U-Boot] [PATCH 1/5] mmc: sd: extracting erase timeout information from sd status Jaehoon Chung
[U-Boot] [PATCH V2] mmc: mmc_legacy: fix the compiler error with disabled CONFIG_DM_MMC_OPS Jaehoon Chung
[U-Boot] [PATCH 1/5] mmc: sd: extracting erase timeout information from sd status Jaehoon Chung
[U-Boot] [PATCH v11] mmc: atmel_sdhci: Convert to the driver model support Jaehoon Chung
[U-Boot] [PATCH 0/4] k2g: switch mmc/sd to driver model Jaehoon Chung
[U-Boot] [PATCH] Please pull u-boot-mmc Jaehoon Chung
[U-Boot] [PATCH] Please pull u-boot-mmc Jaehoon Chung
[U-Boot] [PATCH] mmc: sdhci: Add the programmable clock mode support Jaehoon Chung
[U-Boot] [PATCH] Please pull u-boot-mmc Jaehoon Chung
[U-Boot] [v2] mmc: send CMD0 before CMD1 for some MMC cards Jaehoon Chung
[U-Boot] [PATCH V2] mmc: mmc_legacy: fix the compiler error with disabled CONFIG_DM_MMC_OPS Jaehoon Chung
[U-Boot] [PATCH] Please pull u-boot-mmc Jaehoon Chung
[U-Boot] [U-Boot, v4, 01/13] cmd: fdt: Narrow the check for fdt addr Jaehoon Chung
[U-Boot] [U-Boot, v4, 01/13] cmd: fdt: Narrow the check for fdt addr Jaehoon Chung
[U-Boot] [PATCH] mmc: sdhci: Add the programmable clock mode support Jaehoon Chung
[U-Boot] [PATCH V3 1/2] mmc: sd: extracting erase timeout information from sd status Jaehoon Chung
[U-Boot] [PATCH V3 2/2] mmc: sd: optimize erase Jaehoon Chung
[U-Boot] [PATCH v2 0/6] mmc: sdhci: some fixes for CONFIG_BLK migration and macro renaming Jaehoon Chung
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Jaehoon Chung
[U-Boot] [PATCH v1] mmc: mmc-uclass: Add mmc_init() in mmc preinit phrase Jaehoon Chung
[U-Boot] SZ_* errors compiling mmc master branch Jaehoon Chung
[U-Boot] [PATCH V3 1/2] mmc: sd: extracting erase timeout information from sd status Jaehoon Chung
[U-Boot] SZ_* errors compiling mmc master branch Jaehoon Chung
[U-Boot] Bug in CRC32 (maybe a overflow effect) Charles-Antoine Couret
[U-Boot] [PATCH v2] driver: spi: fsl-qspi: remove compile Warnings Yunhui Cui
[U-Boot] [PATCH] driver: spi: add spansion s25fs-s family protect/unprotect Yunhui Cui
[U-Boot] [PATCH] driver: spi: add spansion s25fs-s family protect/unprotect Yunhui Cui
[U-Boot] [PATCH v2 1/5] mpc85xx/powerpc:cpu_init: Modified the errata A006261 according to endianness Sriram Dash
[U-Boot] [PATCH v2 2/5] mpc85xx/powerpc:P1010: Apply errata A006261 for P1010 Sriram Dash
[U-Boot] [PATCH v2 3/5] mpc85xx/powerpc: P2041: Apply errata A006261 for P2041 Sriram Dash
[U-Boot] [PATCH v2 4/5] mpc85xx/powerpc: P5040: Apply errata A006261 for P5040 Sriram Dash
[U-Boot] [PATCH v2 5/5] mpc85xx/powerpc: Do not apply errata A006261 for T4160, T1040, T2080 Sriram Dash
[U-Boot] [PATCH v3 0/3] Modifies the erratum A006261 according to endianness Sriram Dash
[U-Boot] [PATCH v3 1/3] mpc85xx: powerpc: usb: Modified the erratum A006261 according to endianness Sriram Dash
[U-Boot] [PATCH v3 2/3] mpc85xx: powerpc: usb: Enable Usb phy initialisation settings for P1010 Sriram Dash
[U-Boot] [PATCH v3 3/3] mpc85xx: powerpc: usb: Update the list of Socs afftected by erratum A006261 Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: fsl-dt-fixup: Fix the dt for multiple USB nodes in single traversal of device tree Sriram Dash
[U-Boot] [PATCH] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Sriram Dash
[U-Boot] [PATCH] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Sriram Dash
[U-Boot] [PATCH] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Sriram Dash
[U-Boot] [PATCH] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Sriram Dash
[U-Boot] [PATCH 0/4] Allow disabling non-FIT image loading from SPL Andrew F. Davis
[U-Boot] [PATCH 1/4] Introduce CONFIG_SPL_PANIC_ON_NON_FIT_IMAGE Andrew F. Davis
[U-Boot] [PATCH 2/4] ARM: AM57xx: Disable non-FIT based image loading for HS devices Andrew F. Davis
[U-Boot] [PATCH 3/4] ARM: AM437x: Disable non-FIT based image loading for HS devices Andrew F. Davis
[U-Boot] [PATCH 4/4] ARM: DRA7xx: Disable non-FIT based image loading for HS devices Andrew F. Davis
[U-Boot] [PATCH 2/4] ARM: AM57xx: Disable non-FIT based image loading for HS devices Andrew F. Davis
[U-Boot] [PATCH 00/13] Cleanups to allow secure boot on AM33xx devices Andrew F. Davis
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 02/13] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 03/13] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 04/13] config: am335x_evm: Move CONFIG_SPL_YMODEM_SUPPORT to Kconfig Andrew F. Davis
[U-Boot] [PATCH 05/13] config: am43xx_evm: Move CONFIG_SPL_YMODEM_SUPPORT to Kconfig Andrew F. Davis
[U-Boot] [PATCH 06/13] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
[U-Boot] [PATCH 07/13] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
[U-Boot] [PATCH 08/13] am33xx: config.mk: Fix option used to enable SPI SPL image type Andrew F. Davis
[U-Boot] [PATCH 09/13] doc: Update info on using AM33xx secure devices from TI Andrew F. Davis
[U-Boot] [PATCH 10/13] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
[U-Boot] [PATCH 11/13] omap: Use SD_BOOT in place of EMMC_BOOT Andrew F. Davis
[U-Boot] [PATCH 12/13] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
[U-Boot] [PATCH 13/13] board: am33xx-hs: spl: Allow post-processing of FIT image on AM33xx Andrew F. Davis
[U-Boot] [PATCH 02/13] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 4/4] tools: moveconfig: add --spl option to move options for SPL build Andrew F. Davis
[U-Boot] [PATCH v2 00/11] Allow secure boot on AM33xx devices Andrew F. Davis
[U-Boot] [PATCH v2 01/11] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
[U-Boot] [PATCH v2 02/11] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
[U-Boot] [PATCH v2 03/11] am33xx: config.mk: Fix option used to enable SPI SPL image type Andrew F. Davis
[U-Boot] [PATCH v2 04/11] doc: Update info on using AM33xx secure devices from TI Andrew F. Davis
[U-Boot] [PATCH v2 05/11] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
[U-Boot] [PATCH v2 06/11] board: am33xx-hs: spl: Allow post-processing of FIT image on AM33xx Andrew F. Davis
[U-Boot] [RFC PATCH v2 07/11] omap: Use SD_BOOT in place of EMMC_BOOT Andrew F. Davis
[U-Boot] [RFC PATCH v2 08/11] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
[U-Boot] [RFC PATCH v2 09/11] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
[U-Boot] [RFC PATCH v2 10/11] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Andrew F. Davis
[U-Boot] [RFC PATCH v2 11/11] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 06/13] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
[U-Boot] [RFC PATCH v2 11/11] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE as Kconfig option Andrew F. Davis
[U-Boot] [RFC PATCH v2 09/11] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH 0/3] Enable post-processing of FIT artifacts on HS boards Andrew F. Davis
[U-Boot] [PATCH 1/3] ARM: AM43xx: Enable post-processing of FIT artifacts loaded by U-Boot Andrew F. Davis
[U-Boot] [PATCH 2/3] ARM: DRA7xx: Enable post-processing of FIT artifacts loaded by U-Boot Andrew F. Davis
[U-Boot] [PATCH 3/3] ARM: AM57xx: Enable post-processing of FIT artifacts loaded by U-Boot Andrew F. Davis
[U-Boot] [PATCH] common/xyzModem.c: Fix delay timeout calculation Andrew F. Davis
[U-Boot] [PATCH] timer: Fix possible underflow in udelay Andrew F. Davis
[U-Boot] [PATCH] common/xyzModem.c: Fix delay timeout calculation Andrew F. Davis
[U-Boot] [PATCH] timer: Fix possible underflow in udelay Andrew F. Davis
[U-Boot] [PATCH v3 00/11] Allow secure boot on AM33xx devices Andrew F. Davis
[U-Boot] [PATCH v3 01/11] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH v3 02/11] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
[U-Boot] [PATCH v3 03/11] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
[U-Boot] [PATCH v3 04/11] doc: Update info on using AM33xx secure devices from TI Andrew F. Davis
[U-Boot] [PATCH v3 05/11] am33xx: config.mk: Fix option used to enable SPI SPL image type Andrew F. Davis
[U-Boot] [PATCH v3 06/11] board: am33xx-hs: Allow post-processing of FIT image on AM33xx Andrew F. Davis
[U-Boot] [PATCH v3 07/11] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
[U-Boot] [PATCH v3 08/11] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE Andrew F. Davis
[U-Boot] [PATCH v3 09/11] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
[U-Boot] [PATCH v3 10/11] ti_armv7_common: Disable Falcon Mode on HS devices Andrew F. Davis
[U-Boot] [RFC PATCH v3 11/11] defconfig: Add a config for AM335x High Security EVM with SD Boot support Andrew F. Davis
[U-Boot] [PATCH] common/xyzModem.c: Fix delay timeout calculation Andrew F. Davis
[U-Boot] [PATCH 1/7] include: image.h: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Andrew F. Davis
[U-Boot] [PATCH 3/7] arm: omap-common: Enable support for K2 HS devices in u-boot Andrew F. Davis
[U-Boot] [PATCH 4/7] arm: omap-common: Reuse secure image name between OMAP and keystone Andrew F. Davis
[U-Boot] [PATCH 5/7] arm: mach-keystone: config.mk: Adds support for secure images on K2 Andrew F. Davis
[U-Boot] [PATCH 7/7] configs: Adds a defconfig for K2E High Security EVM Andrew F. Davis
[U-Boot] [PATCH v3 01/11] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Andrew F. Davis
[U-Boot] [PATCH v3 08/11] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE Andrew F. Davis
[U-Boot] [PATCH v4 00/10] Allow secure boot on AM33xx devices Andrew F. Davis
[U-Boot] [PATCH v4 01/10] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
[U-Boot] [PATCH v4 02/10] am33xx: config.mk: Add support for additional secure boot image types Andrew F. Davis
[U-Boot] [PATCH v4 03/10] doc: Update info on using AM33xx secure devices from TI Andrew F. Davis
[U-Boot] [PATCH v4 04/10] am33xx: config.mk: Fix option used to enable SPI SPL image type Andrew F. Davis
[U-Boot] [PATCH v4 05/10] board: am33xx-hs: Allow post-processing of FIT image on AM33xx Andrew F. Davis
[U-Boot] [PATCH v4 06/10] ti: omap-common: Allow AM33xx devices to be built securely Andrew F. Davis
[U-Boot] [PATCH v4 07/10] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE Andrew F. Davis
[U-Boot] [PATCH v4 08/10] config: Remove usage of CONFIG_STORAGE_EMMC Andrew F. Davis
[U-Boot] [PATCH v4 09/10] ti_armv7_common: Disable Falcon Mode on HS devices Andrew F. Davis
[U-Boot] [PATCH v4 10/10] defconfig: Add a config for AM335x High Security EVM with SD Boot support Andrew F. Davis
[U-Boot] [PATCH v4 01/10] Kconfig: Separate AM33XX SOC config from target board config Andrew F. Davis
[U-Boot] how to combine new default env in new u-boot with current saved? Robert P. J. Day
[U-Boot] a fair bit of code that could use ARRAY_SIZE() macro Robert P. J. Day
[U-Boot] what means the "CONFIG_SYS_USE_PPCENV" config setting? Robert P. J. Day
[U-Boot] is there really a "CONFIG_RAMBOOT" config option? Robert P. J. Day
[U-Boot] what's the proper use (if any) of [CONFIG_]ENV_IS_EMBEDDED? Robert P. J. Day
[U-Boot] [PATCH] common/Kconfig: Fix various innocuous typos. Robert P. J. Day
[U-Boot] what means "extra-" versus "obj-" in Makefiles Robert P. J. Day
[U-Boot] Network boot fallback usage/features Wolfgang Denk
[U-Boot] Disable command at runtime Wolfgang Denk
[U-Boot] Disable command at runtime Wolfgang Denk
[U-Boot] Disable command at runtime Wolfgang Denk
[U-Boot] A command to discard saved environments? Wolfgang Denk
[U-Boot] A command to discard saved environments? Wolfgang Denk
[U-Boot] A command to discard saved environments? Wolfgang Denk
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Wolfgang Denk
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Wolfgang Denk
[U-Boot] BeagleboneBlack vboot from SPI flash difficulties Joe Desbonnet
[U-Boot] BeagleboneBlack vboot from SPI flash difficulties Joe Desbonnet
[U-Boot] building u-boot x86 with device tree disabled , still refers to device tree function Ding, ChiX
[U-Boot] building u-boot x86 with device tree disabled , still refers to device tree function Ding, ChiX
[U-Boot] building u-boot x86 with device tree disabled , still refers to device tree function Ding, ChiX
[U-Boot] remote debug u-boot through serial port Ding, ChiX
[U-Boot] remote debug u-boot through serial port Ding, ChiX
[U-Boot] Help Falcon Mode on Wanboard Diego Dorta
[U-Boot] Help Falcon Mode on Wanboard Diego Dorta
[U-Boot] [U-Boot,v3] mmc: add mmc partconf read capability Angelo Dureghello
[U-Boot] Bug in u-boot/tools/mkenvimage.c Mattias Ekholm
[U-Boot] A command to discard saved environments? Fabio Estevam
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Fabio Estevam
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Fabio Estevam
[U-Boot] [PATCH v4] nitrogen6x : Use generic distro configuration Fabio Estevam
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Fabio Estevam
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Fabio Estevam
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Fabio Estevam
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Fabio Estevam
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Fabio Estevam
[U-Boot] [PATCH] ARM: non-sec: flush code cacheline aligned Fabio Estevam
[U-Boot] [PATCH v2] arm: cache: always flush cache line size for page table Fabio Estevam
[U-Boot] [PATCH v2] warp7: Modify fdt_file environment variable Fabio Estevam
[U-Boot] [PATCH] mx6ul_14x14_evk: don't use array for SD2 card detect pad Fabio Estevam
[U-Boot] [RFC PATCH] ARM: cache: cp15: Align addresses when initial page_table setup is flushed Fabio Estevam
[U-Boot] [PATCH 5/5] mmc: sd: optimize erase Fabio Estevam
[U-Boot] [PATCH 5/5] mmc: sd: optimize erase Fabio Estevam
[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size" Fabio Estevam
[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size" Fabio Estevam
[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size" Fabio Estevam
[U-Boot] [RFC PATCH] ARM: cache: cp15: Align addresses when initial page_table setup is flushed Fabio Estevam
[U-Boot] [PATCH] warp: Fix RAM size runtime detection Fabio Estevam
[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size" Fabio Estevam
[U-Boot] [PATCH 1/3] pico-imx6ul: Directly write to register LDOGCTL Fabio Estevam
[U-Boot] [PATCH 2/3] mx7dsabresd: Directly write to register LDOGCTL Fabio Estevam
[U-Boot] [PATCH 3/3] mx7dsabresd: Directly write to register LDOGCTL Fabio Estevam
[U-Boot] [PATCH] warp7: Add PMIC support Fabio Estevam
[U-Boot] mx7: ums command does not mount SD card partitions Fabio Estevam
[U-Boot] UMS - maintain connection Fabio Estevam
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage Fabio Estevam
[U-Boot] mx7: ums command does not mount SD card partitions Fabio Estevam
[U-Boot] [PATCH 3/3] nitrogen6x: add secure boot support Fabio Estevam
[U-Boot] [PATCH] warp7: Adjust CONFIG_MMCROOT for booting a mainline kernel Fabio Estevam
[U-Boot] [PATCH] warp7: Adjust CONFIG_MMCROOT for booting a mainline kernel Fabio Estevam
[U-Boot] [PATCH 1/3] warp7: Add a secure mode target Fabio Estevam
[U-Boot] [PATCH 2/3] warp7: Handle mmcroot for mainline and NXP Fabio Estevam
[U-Boot] [PATCH 3/3] warp7: Print secure/non-secure mode info Fabio Estevam
[U-Boot] [PATCH] warp7: Adjust CONFIG_MMCROOT for booting a mainline kernel Fabio Estevam
[U-Boot] [PATCH 1/3] warp7: Add a secure mode target Fabio Estevam
[U-Boot] [PATCH] warp7: Adjust CONFIG_MMCROOT for booting a mainline kernel Fabio Estevam
[U-Boot] [PATCH v2 1/3] warp7: Add a secure mode target Fabio Estevam
[U-Boot] [PATCH v2 2/3] warp7: Use PARTUUID to specify the rootfs location Fabio Estevam
[U-Boot] [PATCH v2 3/3] warp7: Print secure/non-secure mode info Fabio Estevam
[U-Boot] [PATCH v2] warp7: Modify fdt_file environment variable Fabio Estevam
[U-Boot] [PATCH] warp: Fix RAM size runtime detection Fabio Estevam
[U-Boot] [RFC PATCH 00/12] imx: mx6: add virtual mx6memcal board Fabio Estevam
[U-Boot] mx6ul_14x14_evk Fabio Estevam
[U-Boot] mx6ul_14x14_evk Fabio Estevam
[U-Boot] [PATCH] mx6ul_14x14_evk: Fix DDR calibration values Fabio Estevam
[U-Boot] [PATCH] mx6ul_14x14_evk: Fix DDR calibration values Fabio Estevam
[U-Boot] mx6ul_14x14_evk Fabio Estevam
[U-Boot] [PATCH v2 1/3] mx6: ddr: Adjust MDREF register settings for MX6UL Fabio Estevam
[U-Boot] [PATCH v2 2/3] mx6ul_14x14_evk: Adjust SPL DDR3 settings Fabio Estevam
[U-Boot] [PATCH 2/3] mx6ulinitclockearlier Fabio Estevam
[U-Boot] [PATCH v2 1/3] mx6: ddr: Adjust MDREF register settings for MX6UL Fabio Estevam
[U-Boot] [PATCH v2 2/3] mx6ul_14x14_evk: Adjust SPL DDR3 settings Fabio Estevam
[U-Boot] [PATCH v2 3/3] mx6ul_14x14_ev: Enable the CCGR clocks earlier Fabio Estevam
[U-Boot] [PATCH 2/3] mx6ulinitclockearlier Fabio Estevam
[U-Boot] [PATCH] mx6ul_14x14_evk: Fix DDR calibration values Fabio Estevam
[U-Boot] [PATCH v2 1/3] mx6: ddr: Adjust MDREF register settings for MX6UL Fabio Estevam
[U-Boot] [PATCH v3 1/4] mx6: ddr: Allow changing REFSEL and REFR fields Fabio Estevam
[U-Boot] [PATCH v3 2/4] mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang Fabio Estevam
[U-Boot] [PATCH v3 3/4] mx6ul_14x14_evk: Adjust SPL DDR3 settings Fabio Estevam
[U-Boot] [PATCH v3 4/4] mx6ul_14x14_ev: Enable the CCGR clocks earlier Fabio Estevam
[U-Boot] [PATCH v3 1/4] mx6: ddr: Allow changing REFSEL and REFR fields Fabio Estevam
[U-Boot] [PATCH v3 1/4] mx6: ddr: Allow changing REFSEL and REFR fields Fabio Estevam
[U-Boot] [PATCH v3 1/4] mx6: ddr: Allow changing REFSEL and REFR fields Fabio Estevam
[U-Boot] [PATCH v4 1/4] mx6: ddr: Allow changing REFSEL and REFR fields Fabio Estevam
[U-Boot] [PATCH v4 2/4] mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang Fabio Estevam
[U-Boot] [PATCH v4 3/4] mx6ul_14x14_evk: Adjust SPL DDR3 settings Fabio Estevam
[U-Boot] [PATCH v4 4/4] mx6ul_14x14_ev: Enable the CCGR clocks earlier Fabio Estevam
[U-Boot] mx7: ums command does not mount SD card partitions Fabio Estevam
[U-Boot] [U-Boot, 1/3] mmc: fsl: reset to normal boot mode when eMMC fast boot Peng Fan
[U-Boot] [PATCH 00/21] imx: support i.MX6ULL and EVK board Peng Fan
[U-Boot] [PATCH 01/21] imx: mx6ull: add iomux header file Peng Fan
[U-Boot] [PATCH 02/21] imx: mx6ull: add mx6ull major cpu type Peng Fan
[U-Boot] [PATCH 03/21] imx: mx6ull: add kconfig entry for MX6ULL Peng Fan
[U-Boot] [PATCH 04/21] imx-common: introduce is_mx6ull Peng Fan
[U-Boot] [PATCH 05/21] imx: ocotp: support i.MX6ULL Peng Fan
[U-Boot] [PATCH 06/21] imx: timer: update gpt driver for i.MX6ULL Peng Fan
[U-Boot] [PATCH 07/21] imx: mx6ull: skip setting ahb clock Peng Fan
[U-Boot] [PATCH 08/21] imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ Peng Fan
[U-Boot] [PATCH 09/21] imx: mx6ull: misc soc update Peng Fan
[U-Boot] [PATCH 10/21] imx: mx6ull: adjust POR_B setting for i.MX6ULL Peng Fan
[U-Boot] [PATCH 11/21] imx: mx6ull: update clock settings and CCM register map Peng Fan
[U-Boot] [PATCH 12/21] imx: mx6ull: Update memory map address Peng Fan
[U-Boot] [PATCH 13/21] imx: mx6ull: Add AIPS3 initialization Peng Fan
[U-Boot] [PATCH 14/21] imx: imx6ull: adjust the ldo 1.2v bandgap voltage Peng Fan
[U-Boot] [PATCH 15/21] imx: iomux: fix snvs usage for i.MX6ULL Peng Fan
[U-Boot] [PATCH 16/21] pinctrl: imx6: support i.MX6ULL Peng Fan
[U-Boot] [PATCH 17/21] arm: dts: imx6ull: add pinctrl defines Peng Fan
[U-Boot] [PATCH 18/21] dt-bindings: add i.mx6ul clock header Peng Fan
[U-Boot] [PATCH 19/21] arm: dts: add device tree for i.MX6ULL Peng Fan
[U-Boot] [PATCH 20/21] dm: mmc: intialize dev when probe Peng Fan
[U-Boot] [PATCH 21/21] arm: imx: add i.MX6ULL 14x14 EVK board support Peng Fan
[U-Boot] [PATCH] imx: mx7dsabresd: consolidate BOOT_FROM Peng Fan
[U-Boot] [PATCH 1/5] mmc: sd: extracting erase timeout information from sd status Peng Fan
[U-Boot] [PATCH 2/5] mmc: initialize mmc_cmd with 0 Peng Fan
[U-Boot] [PATCH 3/5] mmc: sd: add erase timeout support Peng Fan
[U-Boot] [PATCH 4/5] mmc: esdhc: change timeout value Peng Fan
[U-Boot] [PATCH 5/5] mmc: sd: optimize erase Peng Fan
[U-Boot] [PATCH 1/5] mmc: sd: extracting erase timeout information from sd status Peng Fan
[U-Boot] [PATCH 5/5] mmc: sd: optimize erase Peng Fan
[U-Boot] [PATCH V2 1/5] mmc: sd: extracting erase timeout information from sd status Peng Fan
[U-Boot] [PATCH V2 2/5] mmc: initialize mmc_cmd with 0 Peng Fan
[U-Boot] [PATCH V2 3/5] mmc: sd: add erase timeout support Peng Fan
[U-Boot] [PATCH V2 4/5] mmc: esdhc: change timeout value Peng Fan
[U-Boot] [PATCH V2 5/5] mmc: sd: optimize erase Peng Fan
[U-Boot] [PATCH 2/5] mmc: initialize mmc_cmd with 0 Peng Fan
[U-Boot] dm video question Peng Fan
[U-Boot] dm video question Peng Fan
[U-Boot] [PATCH 2/5] mmc: initialize mmc_cmd with 0 Peng Fan
[U-Boot] [PATCH V3 1/2] mmc: sd: extracting erase timeout information from sd status Peng Fan
[U-Boot] [PATCH V3 2/2] mmc: sd: optimize erase Peng Fan
[U-Boot] [PATCH] imx: mx7dsabresd: consolidate BOOT_FROM Peng Fan
[U-Boot] [PATCH] mx6ul_14x14_evk: Fix DDR calibration values Peng Fan
[U-Boot] [PATCH V3 1/2] mmc: sd: extracting erase timeout information from sd status Peng Fan
[U-Boot] [PATCH] tools/env: ensure environment starts at erase block boundary Andreas Fenkart
[U-Boot] [RFC: v2] tools/env: ensure environment starts at erase block boundary Andreas Fenkart
[U-Boot] [PATCH 0/2] tools/env: minor fixes plus resend Andreas Fenkart
[U-Boot] [PATCH 1/2] tools/env: return with error if redundant environments have unequal size Andreas Fenkart
[U-Boot] [PATCH 2/2] tools/env: soften warning about erase block alignment Andreas Fenkart
[U-Boot] [PATCH 0/6] tools/env: refactor flash read/write function Andreas Fenkart
[U-Boot] [PATCH 1/6] tools/env: factor out environment_end function Andreas Fenkart
[U-Boot] [PATCH 2/6] tools/env: pass bad block offset by value Andreas Fenkart
[U-Boot] [PATCH 3/6] tools/env: lookup dev_type directly from flash_read_buf/flash_write_buf Andreas Fenkart
[U-Boot] Suspected Spam: Do not open attachements![PATCH 4/6] tools/env: flash_write_buf: enforce offset to be start of environment Andreas Fenkart
[U-Boot] [PATCH v2 7/7] cmd/bdinfo: extract print_std_bdinfo Max Filippov
[U-Boot] [PATCH 0/7] net/ethoc improvements Max Filippov
[U-Boot] [PATCH 1/7] net/ethoc: add Kconfig entry for the driver Max Filippov
[U-Boot] [PATCH 2/7] net/ethoc: use priv instead of dev internally Max Filippov
[U-Boot] [PATCH 3/7] net/ethoc: add CONFIG_DM_ETH support Max Filippov
[U-Boot] [PATCH 4/7] net/ethoc: support device tree Max Filippov
[U-Boot] [PATCH 5/7] net/ethoc: don't mix virtual and physical addresses Max Filippov
[U-Boot] [PATCH 6/7] net/ethoc: support private memory configurations Max Filippov
[U-Boot] [PATCH 7/7] net/ethoc: implement MDIO bus and support phylib Max Filippov
[U-Boot] [PATCH 3/7] net/ethoc: add CONFIG_DM_ETH support Max Filippov
[U-Boot] [PATCH 7/7] net/ethoc: implement MDIO bus and support phylib Max Filippov
[U-Boot] [PATCH v2 0/7] net/ethoc improvements Max Filippov
[U-Boot] [PATCH v2 1/7] net/ethoc: add Kconfig entry for the driver Max Filippov
[U-Boot] [PATCH v2 2/7] net/ethoc: use priv instead of dev internally Max Filippov
[U-Boot] [PATCH v2 3/7] net/ethoc: add CONFIG_DM_ETH support Max Filippov
[U-Boot] [PATCH v2 4/7] net/ethoc: support device tree Max Filippov
[U-Boot] [PATCH v2 5/7] net/ethoc: don't mix virtual and physical addresses Max Filippov
[U-Boot] [PATCH v2 6/7] net/ethoc: support private memory configurations Max Filippov
[U-Boot] [PATCH v2 7/7] net/ethoc: implement MDIO bus and support phylib Max Filippov
[U-Boot] [PATCH v3 0/6] U-Boot port to Xtensa architecture Max Filippov
[U-Boot] [PATCH v3 1/6] xtensa: add support for the xtensa processor architecture [1/2] Max Filippov
[U-Boot] [PATCH v3 2/6] xtensa: add support for the xtensa processor architecture [2/2] Max Filippov
[U-Boot] [PATCH v3 3/6] xtensa: add core information for the dc232b processor Max Filippov
[U-Boot] [PATCH v3 4/6] xtensa: add core information for the dc233c processor Max Filippov
[U-Boot] [PATCH v3 5/6] xtensa: add core information for the de212 processor Max Filippov
[U-Boot] [PATCH v3 6/6] xtensa: add support for the 'xtfpga' evaluation board Max Filippov
[U-Boot] [PATCH] drivers/sysreset: group sysreset drivers Max Filippov
[U-Boot] [PATCH v3 2/6] xtensa: add support for the xtensa processor architecture [2/2] Max Filippov
[U-Boot] [PATCH v3 6/6] xtensa: add support for the 'xtfpga' evaluation board Max Filippov
[U-Boot] [PATCH v2] drivers/sysreset: group sysreset drivers Max Filippov
[U-Boot] [PATCH v4 0/6] U-Boot port to Xtensa architecture Max Filippov
[U-Boot] [PATCH v4 1/6] xtensa: add support for the xtensa processor architecture [1/2] Max Filippov
[U-Boot] [PATCH v4 2/6] xtensa: add support for the xtensa processor architecture [2/2] Max Filippov
[U-Boot] [PATCH v4 3/6] xtensa: add core information for the dc232b processor Max Filippov
[U-Boot] [PATCH v4 4/6] xtensa: add core information for the dc233c processor Max Filippov
[U-Boot] [PATCH v4 5/6] xtensa: add core information for the de212 processor Max Filippov
[U-Boot] [PATCH v4 6/6] xtensa: add support for the 'xtfpga' evaluation board Max Filippov
[U-Boot] OMAP3 SPL Overflow Adam Ford
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Adam Ford
[U-Boot] [PATCH 00/42] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Adam Ford
[U-Boot] OMAP3 SPL Overflow Adam Ford
[U-Boot] [PATCH] TI: Rework SRAM definitions and maximums Adam Ford
[U-Boot] Question on Enabling hypervisor mode in u-boot Andreas Färber
[U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support Andreas Färber
[U-Boot] [PATCH 1/2] mmc: Add Amlogic Meson driver Andreas Färber
[U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support Andreas Färber
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Andreas Färber
[U-Boot] [PATCH v3] arm: cache: always flush cache line size for page table Andreas Färber
[U-Boot] [PATCH v5 0/4] add support for rk3399 soc and evb Andreas Färber
[U-Boot] [PATCH] rockchip: rk3399: update MAINTAINER file Andreas Färber
[U-Boot] [PATCH 0/4] Amlogic Meson pinctrl driver for u-boot Beniamino Galvani
[U-Boot] [PATCH 1/4] pinctrl: generic: scan for "pins" and "groups" properties in sub-nodes Beniamino Galvani
[U-Boot] [PATCH 2/4] arm: dts: update DTS files for meson-gxbb and odroid-c2 Beniamino Galvani
[U-Boot] [PATCH 3/4] pinctrl: add driver for meson-gxbb pin controller Beniamino Galvani
[U-Boot] [PATCH 4/4] meson: odroid-c2: enable Ethernet support through the device tree Beniamino Galvani
[U-Boot] [PATCH] fsl_sec_mon: Update driver for Security Monitor Sumit Garg
[U-Boot] [PATCH] fsl_sfp : Modify macros as per changes in SFP v3.4 Sumit Garg
[U-Boot] [PATCH] sunxi: Tune H3 DRAM PLL to improve lock time Heather Gibson
[U-Boot] [PATCH] rockchip: add fastboot support for rk3036 board Simon Glass
[U-Boot] [PATCH] rockchip: add support for rk3288 miniarm board Simon Glass
[U-Boot] Please pull u-boot-rockchip Simon Glass
[U-Boot] [PATCH 0/9] test: Fix up some missed review comments Simon Glass
[U-Boot] [PATCH 1/9] Makefile: Allow 'make tests' to run tests Simon Glass
[U-Boot] [PATCH 2/9] test: Fix typos and tidy up Simon Glass
[U-Boot] [PATCH 3/9] test: Check exit status in run_and_log_expect_exception() Simon Glass
[U-Boot] [PATCH 4/9] test: Fix typos in comments Simon Glass
[U-Boot] [PATCH 5/9] test: Drop the cmd() function Simon Glass
[U-Boot] [PATCH 6/9] test: Rename sha to sha_algo and pass it around Simon Glass
[U-Boot] [PATCH 7/9] test: vboot: Put each test variant in its own section Simon Glass
[U-Boot] [PATCH 8/9] test: Add a function to restart U-Boot Simon Glass
[U-Boot] [PATCH 9/9] test: Adjust run_command_list() to return a list of strings Simon Glass
[U-Boot] [PATCH 24/27] dm: zynq: usb: Convert to CONFIG_DM_USB Simon Glass
[U-Boot] [PATCH 1/4] dm: clk: Add a way to find a clock by its driver Simon Glass
[U-Boot] [PATCH 1/4] gpio: Add driver for TI PCF8575 I2C GPIO expander Simon Glass
[U-Boot] [PATCH 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575 Simon Glass
[U-Boot] [bug report]cmd: cache: output information Simon Glass
[U-Boot] [PATCH 01/10] dm: imx: serial: support device tree Simon Glass
[U-Boot] [PATCH 02/10] pinctrl: imx: do not announce driver initialization Simon Glass
[U-Boot] [PATCH 04/10] arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree Simon Glass
[U-Boot] [PATCH 07/10] power: pmic: add Ricoh RN5T567 PMIC support Simon Glass
[U-Boot] [PATCH] Add a power domain framework/uclass Simon Glass
[U-Boot] [PATCH 03/14] drivers: i2c: uclass: parse dt parameters only when CONFIG_OF_CONTROL is enable Simon Glass
[U-Boot] [PATCH PATCH v1] watchdog: Fix Watchdog Reset while in U-Boot Prompt Simon Glass
[U-Boot] [PATCH] serial: Enable checking UART is ready for console based on device tree Simon Glass
[U-Boot] [PATCH v2 00/10] MIPS Boston Development Board Support Simon Glass
[U-Boot] [PATCH v2 01/10] serial: ns16550: Support clocks via phandle Simon Glass
[U-Boot] [PATCH v2 07/10] dm: regmap: Implement simple regmap_read & regmap_write Simon Glass
[U-Boot] [PATCH v2 09/10] clk: boston: Providea simple driver for Boston board clocks Simon Glass
[U-Boot] [PATCH 1/9] ARM: tegra: adapt to latest HSP DT binding Simon Glass
[U-Boot] [PATCH 2/9] ARM: tegra: add BPMP DT bindings Simon Glass
[U-Boot] [PATCH 3/9] ARM: tegra: add BPMP and dependencies to Tegra186 DT Simon Glass
[U-Boot] [PATCH 4/9] misc: add Tegra BPMP driver Simon Glass
[U-Boot] [PATCH 5/9] clock: add Tegra186 clock driver Simon Glass
[U-Boot] [PATCH 6/9] reset: add Tegra186 reset driver Simon Glass
[U-Boot] [PATCH 7/9] power domain: add Tegra186 driver Simon Glass
[U-Boot] [PATCH 9/9] ARM: tegra: call tegra_board_init on Tegra186 Simon Glass
[U-Boot] [PATCH 1/5] pci: tegra: port to standard clock/reset/pwr domain APIs Simon Glass
[U-Boot] [PATCH 2/5] ARM: tegra: add PCIe controller to Tegra186 SoC DT Simon Glass
[U-Boot] [PATCH 3/5] i2c: tegra: add standardized clk/reset API support Simon Glass
[U-Boot] [PATCH 4/5] ARM: tegra: add I2C controllers to Tegra186 DT Simon Glass
[U-Boot] [PATCH 5/5] ARM: tegra: enable I2C buses for P2771-0000 Simon Glass
[U-Boot] [PATCH v2 1/7] cmd/bdinfo: extract print_bi_boot_params Simon Glass
[U-Boot] [PATCH v2 2/7] cmd/bdinfo: extract print_bi_mem Simon Glass
[U-Boot] [PATCH v2 3/7] cmd/bdinfo: extract print_bi_dram Simon Glass
[U-Boot] [PATCH v2 4/7] cmd/bdinfo: extract print_bi_flash Simon Glass
[U-Boot] [PATCH v2 5/7] cmd/bdinfo: extract print_eth_ip_addr Simon Glass
[U-Boot] [PATCH v2 6/7] cmd/bdinfo: extract print_baudrate Simon Glass
[U-Boot] [PATCH v2 7/7] cmd/bdinfo: extract print_std_bdinfo Simon Glass
[U-Boot] [PATCH v2] libfdt: Introduce new ARCH_FIXUP_FDT option Simon Glass
[U-Boot] [PATCH v3] libfdt: Introduce new ARCH_FIXUP_FDT option Simon Glass
[U-Boot] [PATCH v2 07/22] clock-uclass: allow disabling a peripheral clock Simon Glass
[U-Boot] [RFC PATCH] i2c: i2c-uclass-compat: avoid any BSS usage Simon Glass
[U-Boot] [PATCH v2 02/13] dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev() Simon Glass
[U-Boot] [PATCH] ARM64: zynqmp: Add u-boot, dm-pre-reloc to clk nodes Simon Glass
[U-Boot] [PATCH 2/7] misc: Tegra BPMP: support child node devices Simon Glass
[U-Boot] [PATCH 3/7] dt-bindings: add Tegra186 BPMP I2C binding Simon Glass
[U-Boot] [PATCH 4/7] i2c: add Tegra186 BPMP driver Simon Glass
[U-Boot] [PATCH 5/7] ARM: tegra: add BPMP to Tegra186 device tree Simon Glass
[U-Boot] [PATCH 6/7] ARM: tegra: enable SD card on p2771-0000 Simon Glass
[U-Boot] [PATCH 7/7] ARM: tegra: enable PCIe controller on p2771-0000 Simon Glass
[U-Boot] buildman error? Simon Glass
[U-Boot] [PATCH v3] libfdt: Introduce new ARCH_FIXUP_FDT option Simon Glass
[U-Boot] [PATCH] rockchip: rockchip, sdram-channel 0xff fix remaining dts Simon Glass
[U-Boot] buildman error? Simon Glass
[U-Boot] [PATCH v2 1/2] rk3399: add basic soc driver Simon Glass
[U-Boot] [PATCH 2/2] mmc: sdhci: remove the unnecessary argumetns for sdhci_setup_cfg Simon Glass
[U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg Simon Glass
[U-Boot] [PATCH v2 08/10] dm: syscon: Provide a generic syscon driver Simon Glass
[U-Boot] [PATCH 8/9] mmc: tegra: port to standard clock/reset APIs Simon Glass
[U-Boot] [PATCH] mmc: s5p_sdhci: support the Driver model for Exynos Simon Glass
[U-Boot] [PATCH 1/2] mmc: dw_mmc: transfer proper bytes to FIFO Simon Glass
[U-Boot] [PATCH 2/2] mmc: dw_mmc: fix data starvation by host timeout under FIFO mode Simon Glass
[U-Boot] [PATCH v3] mmc-uclass: correct the device number Simon Glass
[U-Boot] [PATCH] rockchip: rockchip, sdram-channel 0xff fix remaining dts Simon Glass
[U-Boot] [PATCH 1/4] Introduce CONFIG_SPL_PANIC_ON_NON_FIT_IMAGE Simon Glass
[U-Boot] [PATCH V2] misc: Tegra BPMP: support child node devices Simon Glass
[U-Boot] [PATCH v3] libfdt: Introduce new ARCH_FIXUP_FDT option Simon Glass
[U-Boot] [PATCH v2 01/11] buildman: Tidy up the README a little Simon Glass
[U-Boot] [PATCH v2 02/11] buildman: Automatically create a config file if needed Simon Glass
[U-Boot] [PATCH v2 03/11] buildman: Fix the 'help' test to use the correct path Simon Glass
[U-Boot] [PATCH v2 04/11] buildman: Allow the toolchain error to be suppressed Simon Glass
[U-Boot] [PATCH v2 05/11] buildman: Improve the toolchain progress/error output Simon Glass
[U-Boot] [PATCH v2 06/11] buildman: Fix a typo in TestSettingsHasPath() Simon Glass
[U-Boot] [PATCH v2 07/11] buildman: Drop the toolchain error when downloading toolchains Simon Glass
[U-Boot] [PATCH v2 08/11] buildman: Avoid overwriting existing toolchain entries Simon Glass
[U-Boot] [PATCH v2 09/11] buildman: Add a quick-start note Simon Glass
[U-Boot] [PATCH v2 10/11] Drop the MAKEALL tool Simon Glass
[U-Boot] [PATCH v2 11/11] Drop references to MAKEALL in the documentation Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Simon Glass
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Simon Glass
[U-Boot] [PATCH 1/2] fdt_support: fdt_translate_address() blob const correctness Simon Glass
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Simon Glass
[U-Boot] [PATCH] ARM64: zynqmp: Do not enable DM_MMC by default Simon Glass
[U-Boot] [PATCH 1/5] pci: tegra: port to standard clock/reset/pwr domain APIs Simon Glass
[U-Boot] [PATCH 2/4] ARM: AM57xx: Disable non-FIT based image loading for HS devices Simon Glass
[U-Boot] [PATCH 8/9] mmc: tegra: port to standard clock/reset APIs Simon Glass
[U-Boot] [PATCH 6/7] ARM: tegra: enable SD card on p2771-0000 Simon Glass
[U-Boot] [PATCH 1/3] clock: rk3399: add support for dwmmc 400K Simon Glass
[U-Boot] [PATCH 2/3] dts: rk3399: enable dwmmc for sdcard Simon Glass
[U-Boot] [PATCH 3/3] config: rk3399: enable dwmmc controller Simon Glass
[U-Boot] [PATCH] x86: bayleybay: Add PS/2 keyboard and mouse to ASL file Simon Glass
[U-Boot] [PATCH v2 07/10] power: pmic: add Ricoh RN5T567 PMIC support Simon Glass
[U-Boot] [PATCH v2 08/10] arm: dts: imx7: add Ricoh RN5T567 PMIC node Simon Glass
[U-Boot] [PATCH 3/7] net/ethoc: add CONFIG_DM_ETH support Simon Glass
[U-Boot] [PATCH 1/2] rockchip: add basic partitions support for rk3288 Simon Glass
[U-Boot] [PATCH] net: e1000: Allow to use e1000 SPI command with DM Simon Glass
[U-Boot] [PATCH v2] eth: asix88179: Add support for the driver model Simon Glass
[U-Boot] [PATCH] tegra: config: Add 'pci enum' to preboot when PCI is enabled Simon Glass
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Simon Glass
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Simon Glass
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Simon Glass
[U-Boot] [PATCH 2/4] ARM: AM57xx: Disable non-FIT based image loading for HS devices Simon Glass
[U-Boot] [PATCH] configs: rk3399: add gpt and fs support Simon Glass
[U-Boot] [PATCH v3 2/2] mmc: rockchip_sdhci: add clock init Simon Glass
[U-Boot] [RESEND PATCH 1/2] rockchip: add basic partitions support for rk3288 Simon Glass
[U-Boot] [RESEND PATCH 2/2] rockchip: add usb mass storage feature support for rk3288 Simon Glass
[U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg Simon Glass
[U-Boot] [PATCH 2/2] mmc: sdhci: remove the unnecessary argumetns for sdhci_setup_cfg Simon Glass
[U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg Simon Glass
[U-Boot] [PATCH] rockchip: add fastboot support for rk3036 board Simon Glass
[U-Boot] [PATCH] rockchip: rockchip, sdram-channel 0xff fix remaining dts Simon Glass
[U-Boot] [PATCH v3 1/2] rk3399: add basic soc driver Simon Glass
[U-Boot] [PATCH] move: rockchip: move clock drivers into a subdirectory Simon Glass
[U-Boot] [PATCH v2] rockchip: add support for rk3288 miniarm board Simon Glass
[U-Boot] [RESEND PATCH 1/2] rockchip: add basic partitions support for rk3288 Simon Glass
[U-Boot] [RESEND PATCH 2/2] rockchip: add usb mass storage feature support for rk3288 Simon Glass
[U-Boot] [PATCH 1/2] mmc: sdhci: remove the unused argument for sdhci_setup_cfg Simon Glass
[U-Boot] [PATCH v2] arm: cache: always flush cache line size for page table Simon Glass
[U-Boot] [PATCH v6 09/12] dm: core: Match compatible strings in order of priority Simon Glass
[U-Boot] [PATCH v6 02/12] serial: ns16550: Support clocks via phandle Simon Glass
[U-Boot] [PATCH v4 03/11] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge Simon Glass
[U-Boot] [PATCH v6 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Simon Glass
[U-Boot] [PATCH] ARM: tegra: add IVC protocol implementation Simon Glass
[U-Boot] [PATCH 5/9] clock: add Tegra186 clock driver Simon Glass
[U-Boot] rockchip: SecureBoot Support? Simon Glass
[U-Boot] [PATCH v2] configs: rk3399: add gpt and fs support Simon Glass
[U-Boot] [PATCH 2/2] fdt: allow fdtdec_get_addr_size_*() to translate addresses Simon Glass
[U-Boot] [PATCH 1/5] pci: tegra: port to standard clock/reset/pwr domain APIs Simon Glass
[U-Boot] [PATCH] pxe: Fix pxe boot with FIT image Simon Glass
[U-Boot] [PATCH] tiny-printf: Adjust to avoid using data section Simon Glass
[U-Boot] An anomaly in image booting code Simon Glass
[U-Boot] [PATCH v2] SPL: tiny-printf: avoid any BSS usage Simon Glass
[U-Boot] [PATCH v2] configs: rk3399: add gpt and fs support Simon Glass
[U-Boot] [PATCH v2 1/3] clock: rk3399: add support for dwmmc 400K Simon Glass
[U-Boot] [PATCH v2 2/3] dts: rk3399: enable dwmmc for sdcard Simon Glass
[U-Boot] [PATCH v2 3/3] config: rk3399: enable dwmmc controller Simon Glass
[U-Boot] [PATCH V3 1/6] misc: add "call" uclass op Simon Glass
[U-Boot] [PATCH] ARM: tegra: add IVC protocol implementation Simon Glass
[U-Boot] [PATCH V3 2/6] misc: add Tegra BPMP driver Simon Glass
[U-Boot] [PATCH V3 3/6] clock: add Tegra186 clock driver Simon Glass
[U-Boot] [PATCH V3 4/6] reset: add Tegra186 reset driver Simon Glass
[U-Boot] [PATCH V3 5/6] power domain: add Tegra186 driver Simon Glass
[U-Boot] [PATCH V2 1/3] mmc: tegra: port to standard clock/reset APIs Simon Glass
[U-Boot] [PATCH V2 2/3] pci: tegra: port to standard clock/reset/pwr domain APIs Simon Glass
[U-Boot] [PATCH V2 3/3] i2c: tegra: add standardized clk/reset API support Simon Glass
[U-Boot] [PATCH 1/2 RESEND] fdt_support: fdt_translate_address() blob const correctness Simon Glass
[U-Boot] [PATCH 2/2 RESEND] fdt: allow fdtdec_get_addr_size_*() to translate addresses Simon Glass
[U-Boot] [PATCH v3 1/6] xtensa: add support for the xtensa processor architecture [1/2] Simon Glass
[U-Boot] [PATCH v3 2/6] xtensa: add support for the xtensa processor architecture [2/2] Simon Glass
[U-Boot] [PATCH v3 3/6] xtensa: add core information for the dc232b processor Simon Glass
[U-Boot] [PATCH v3 4/6] xtensa: add core information for the dc233c processor Simon Glass
[U-Boot] [PATCH v3 5/6] xtensa: add core information for the de212 processor Simon Glass
[U-Boot] [PATCH v3 6/6] xtensa: add support for the 'xtfpga' evaluation board Simon Glass
[U-Boot] [PATCH 1/2] i2c: Drop redundant platform data setting in drivers Simon Glass
[U-Boot] [PATCH 2/2] x86: i2c: Avoid using BSS before it is available Simon Glass
[U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Simon Glass
[U-Boot] Please pull u-boot-rockchip Simon Glass
[U-Boot] [PATCH 1/2 RESEND] fdt_support: fdt_translate_address() blob const correctness Simon Glass
[U-Boot] [PATCH 1/2] bdinfo: Don't print out empty DRAM banks Simon Glass
[U-Boot] [PATCH 2/2] x86: bdinfo: Drop meaningless values Simon Glass
[U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support Simon Glass
[U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support Simon Glass
[U-Boot] [PATCH 1/6] x86: Add implementations of setjmp() and longjmp() Simon Glass
[U-Boot] [PATCH 2/6] efi: Fix missing EFIAPI specifiers Simon Glass
[U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program Simon Glass
[U-Boot] [PATCH 4/6] x86: efi: Add EFI loader support for x86 Simon Glass
[U-Boot] [PATCH 5/6] x86: efi: Add a hello world test program Simon Glass
[U-Boot] [PATCH 6/6] x86: Enable EFI loader support Simon Glass
[U-Boot] [PATCH 1/2 RESEND] fdt_support: fdt_translate_address() blob const correctness Simon Glass
[U-Boot] [PATCH v2 12/13] dm: mmc: Enable DM_MMC_OPS by default with DM_MMC Simon Glass
[U-Boot] [PATCH v2 13/13] dm: blk: Enable CONFIG_BLK if DM_MMC is enabled Simon Glass
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Simon Glass
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Simon Glass
[U-Boot] [PATCH] common: sh: add necessary define bits to board_f Simon Glass
[U-Boot] [PATCH v2 3/3] CONFIG_EFI_LOADER breaks rock2 kernel loading Simon Glass
[U-Boot] [PATCH v2] drivers/sysreset: group sysreset drivers Simon Glass
[U-Boot] [PATCH 1/2] power: regulator: act8846: fix reading values Simon Glass
[U-Boot] [PATCH 2/2] power: pmic: act8846: add missing newline to debug statements Simon Glass
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Simon Glass
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Simon Glass
[U-Boot] [PATCH] ARM: tegra: move ft_system_setup() Simon Glass
[U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support Simon Glass
[U-Boot] [PATCH v5 0/4] add support for rk3399 soc and evb Simon Glass
[U-Boot] [PATCH 2/2] x86: i2c: Avoid using BSS before it is available Simon Glass
[U-Boot] [PATCH] ARM: tegra: fix trimslice environment location Simon Glass
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Simon Glass
[U-Boot] [PATCH v6 01/12] clk: Use dummy clk_get_by_* functions when CONFIG_CLK is disabled Simon Glass
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Simon Glass
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Simon Glass
[U-Boot] [PATCH v2 3/3] CONFIG_EFI_LOADER breaks rock2 kernel loading Simon Glass
[U-Boot] [PATCH] rockchip: rk3399: update MAINTAINER file Simon Glass
[U-Boot] [PATCH 1/6] x86: Add implementations of setjmp() and longjmp() Simon Glass
[U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program Simon Glass
[U-Boot] Disable command at runtime Simon Glass
[U-Boot] [PATCH 1/4] Sandbox: document support of block device emulation Simon Glass
[U-Boot] [PATCH v2] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Simon Glass
[U-Boot] [PATCH 2/4] sandbox: Add "host size" hostfs command for fs test Simon Glass
[U-Boot] [PATCH 4/4] test/fs: replace deprecated "sb" command with "host" Simon Glass
[U-Boot] [PATCH 4/6] x86: efi: Add EFI loader support for x86 Simon Glass
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Simon Glass
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Simon Glass
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Simon Glass
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Simon Glass
[U-Boot] BeagleboneBlack vboot from SPI flash difficulties Simon Glass
[U-Boot] [PATCH 1/2] bcm2835_gpio: Implement GPIOF_FUNC Simon Glass
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Simon Glass
[U-Boot] [PATCH 2/2] serial: bcm283x_mu: Detect disabled serial device Simon Glass
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Simon Glass
[U-Boot] CACHE: Misaligned operation Simon Glass
[U-Boot] [PATCH 1/2] power: regulator: act8846: fix reading values Simon Glass
[U-Boot] [PATCH 2/2] power: pmic: act8846: add missing newline to debug statements Simon Glass
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH] rockchip: rk3288-firefly: enable boot from eMMC Simon Glass
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Simon Glass
[U-Boot] [PATCH 2/6] efi: Fix missing EFIAPI specifiers Simon Glass
[U-Boot] [PATCH 20/21] dm: mmc: intialize dev when probe Simon Glass
[U-Boot] [PATCH 5/7] smbios: Expose in efi_loader as table Simon Glass
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Simon Glass
[U-Boot] [PATCH v2 7/7] smbios: Provide serial number Simon Glass
[U-Boot] [PATCH 2/5] mmc: initialize mmc_cmd with 0 Simon Glass
[U-Boot] [PATCH] kconfig: use bool instead of boolean for type definition attributes Simon Glass
[U-Boot] [PATCH] rockchip: use dummy byte only enable OF_PLATDATA Simon Glass
[U-Boot] disabling mmc in spl when booting using bootrom Simon Glass
[U-Boot] [PATCH 1/5] rk3399: syscon: add support for pmugrf Simon Glass
[U-Boot] [PATCH 2/5] pinctrl: add driver for rk3399 Simon Glass
[U-Boot] [PATCH 3/5] config: evb-rk3399: enable pinctrl driver Simon Glass
[U-Boot] [PATCH 4/5] rk3399: enable the pwm2/3 pinctrl in board init Simon Glass
[U-Boot] [PATCH 5/5] dts: rk3399: add pinctrl for sdmmc Simon Glass
[U-Boot] [PATCH V2] mmc: mmc_legacy: fix the compiler error with disabled CONFIG_DM_MMC_OPS Simon Glass
[U-Boot] building u-boot x86 with device tree disabled , still refers to device tree function Simon Glass
[U-Boot] [PATCH 1/5] clk: rk3399: add pmucru controller support Simon Glass
[U-Boot] [PATCH 3/5] rk_pwm: use clock framework API to get module clock Simon Glass
[U-Boot] [PATCH 4/5] rk_pwm: remove grf setting code from driver Simon Glass
[U-Boot] [PATCH 2/5] clk: rk3288: add PWM clock get rate Simon Glass
[U-Boot] SPL loading multiple binaries from FIT image? Simon Glass
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Simon Glass
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Simon Glass
[U-Boot] Please pull u-boot-dm Simon Glass
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Simon Glass
[U-Boot] [PATCH 5/7] smbios: Expose in efi_loader as table Simon Glass
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Simon Glass
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Simon Glass
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Simon Glass
[U-Boot] [PATCH] clk.h: inline clk_get_by_name() Simon Glass
[U-Boot] [PATCH 5/5] rk3288: add arch_cpu_init for rk3288 Simon Glass
[U-Boot] [PATCH v2] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Simon Glass
[U-Boot] [PATCH v4 2/2] serial: bcm283x_mu: Detect disabled serial device Simon Glass
[U-Boot] [RESEND PATCH v2 2/5] pinctrl: add driver for rk3399 Simon Glass
[U-Boot] [PATCH v3 4/8] smbios: Allow compilation on 64bit systems Simon Glass
[U-Boot] [PATCH v3 1/8] x86: Move table csum into separate header Simon Glass
[U-Boot] [PATCH v3 3/8] efi_loader: Expose efi_install_configuration_table Simon Glass
[U-Boot] [PATCH v3 5/8] smbios: Generate type 4 on non-x86 systems Simon Glass
[U-Boot] [PATCH 5/7] smbios: Expose in efi_loader as table Simon Glass
[U-Boot] dm video question Simon Glass
[U-Boot] [PATCH 4/4] config: rk3399: add support for dwc3 gadget Simon Glass
[U-Boot] [PATCH v3 7/8] efi_loader: Fix efi_install_configuration_table Simon Glass
[U-Boot] [PATCH v3 1/8] x86: Move table csum into separate header Simon Glass
[U-Boot] [PATCH 1/4] rk3399: add a empty "sys_proto.h" header file Simon Glass
[U-Boot] [PATCH 2/4] board: evb-rk3399: add api to support dwc3 gadget Simon Glass
[U-Boot] buildman error Simon Glass
[U-Boot] [PATCH v2] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Simon Glass
[U-Boot] [PATCH 2/4] arm: dts: update DTS files for meson-gxbb and odroid-c2 Simon Glass
[U-Boot] [PATCH 1/4] pinctrl: generic: scan for "pins" and "groups" properties in sub-nodes Simon Glass
[U-Boot] [PATCH 3/4] pinctrl: add driver for meson-gxbb pin controller Simon Glass
[U-Boot] [PATCH 4/4] meson: odroid-c2: enable Ethernet support through the device tree Simon Glass
[U-Boot] [PATCH 4/5] arm: Provide common PSCI based reset handler Simon Glass
[U-Boot] [PATCH 5/5] efi_loader: Add generic PSCI RTS Simon Glass
[U-Boot] [PATCH 1/5] efi_loader: Allow boards to implement get_time and reset_system Simon Glass
[U-Boot] [PATCH 2/5] arm: Disable HVC PSCI calls by default Simon Glass
[U-Boot] [PATCH 3/5] arm: Add PSCI shutdown function Simon Glass
[U-Boot] [PATCH 3/6] arm, at91: add icache support Simon Glass
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Simon Glass
[U-Boot] [PATCH 2/7] rockchip: select DM_USB for rockchip SoC Simon Glass
[U-Boot] [PATCH 3/7] config: rk3399: add usb related configs Simon Glass
[U-Boot] [PATCH 4/7] dts: rk3399: add dwc3_typec node for rk3399 Simon Glass
[U-Boot] [PATCH 5/7] dts: rk3399-evb: add regulator-fixed for usb host vbus Simon Glass
[U-Boot] [PATCH 6/7] board: evb-rk3399: enable usb 2.0 host vbus power on board_init Simon Glass
[U-Boot] [PATCH 7/7] config: evb-rk3399: enable fixed regulator Simon Glass
[U-Boot] [PATCH v4 5/8] smbios: Generate type 4 on non-x86 systems Simon Glass
[U-Boot] [PATCH 2/5] mmc: initialize mmc_cmd with 0 Simon Glass
[U-Boot] [PATCH 1/5] efi_loader: Allow boards to implement get_time and reset_system Simon Glass
[U-Boot] dm video question Simon Glass
[U-Boot] [PATCH 4/5] arm: Provide common PSCI based reset handler Simon Glass
[U-Boot] [PATCH 5/5] efi_loader: Add generic PSCI RTS Simon Glass
[U-Boot] [PATCH 03/13] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE as Kconfig option Simon Glass
[U-Boot] [PATCH] rockchip: rk3399: update MAINTAINER file Simon Glass
[U-Boot] [PATCH] pinctrl: fix typos in comment blocks of pinconfig_post_bind() Simon Glass
[U-Boot] [PATCH v6 01/10] x86: Move table csum into separate file Simon Glass
[U-Boot] [PATCH v6 02/10] x86: Move smbios generation into arch independent directory Simon Glass
[U-Boot] [PATCH v6 05/10] cpu: Add DMTF id and family fields Simon Glass
[U-Boot] [PATCH v6 06/10] cpu: Add get_vendor callback Simon Glass
[U-Boot] [PATCH v6 07/10] smbios: Generate type 4 on non-x86 systems Simon Glass
[U-Boot] [PATCH v6 08/10] smbios: Expose in efi_loader as table Simon Glass
[U-Boot] [PATCH 1/2] ARM: tegra: fix Tegra186 I2C clock name Simon Glass
[U-Boot] [PATCH] spi: tegra: fix hand in set_mode() Simon Glass
[U-Boot] [PATCH 2/2] ARM: tegra: fix Tegra186 SDHCI clock/reset names Simon Glass
[U-Boot] [PATCH 1/5] efi_loader: Allow boards to implement get_time and reset_system Simon Glass
[U-Boot] [PATCH v2 6/7] board: evb-rk3399: enable usb 2.0 host vbus power on board_init Simon Glass
[U-Boot] [PATCH v2 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Simon Glass
[U-Boot] [PATCH 02/13] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Simon Glass
[U-Boot] [PATCH] regulator: fixed: obey startup delay Simon Glass
[U-Boot] Should MMC drivers use CONFIG_BLK? Simon Glass
[U-Boot] [PATCH 1/3] x86: efi: payload: Make efi payload build again Simon Glass
[U-Boot] [PATCH 2/3] x86: efi: payload: Correct BITS_PER_LONG to 32 Simon Glass
[U-Boot] [PATCH 3/3] x86: qemu: efi: Add two boards for EFI 32-bit and 64-bit payload Simon Glass
[U-Boot] [RFC PATCH 0/2] RFC: Detect and reject new ad-hoc CONFIG options Simon Glass
[U-Boot] [RFC PATCH 1/2] Kconfig: Add a whitelist of ad-hoc CONFIG options Simon Glass
[U-Boot] [RFC PATCH 2/2] Makefile: Give a build error if ad-hoc CONFIG options are added Simon Glass
[U-Boot] [PATCH 00/42] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 01/42] moveconfig: Add an option to skip prompts Simon Glass
[U-Boot] [PATCH 02/42] moveconfig: Add an option to commit changes Simon Glass
[U-Boot] [PATCH 03/42] Kconfig: Move SPL settings into their own file Simon Glass
[U-Boot] [PATCH 04/42] arm: fsl: Adjust ordering of #ifndef CONFIG_SPL_BUILD Simon Glass
[U-Boot] [PATCH 05/42] Drop CONFIG_SPL_RAM_SUPPORT Simon Glass
[U-Boot] [PATCH 06/42] Use separate options for TPL support Simon Glass
[U-Boot] [PATCH 07/42] Kconfig: spl: Add SPL support options to Kconfig Simon Glass
[U-Boot] [PATCH 08/42] Kconfig: tpl: Add some TPL support options to Kconfig Simon Glass
[U-Boot] [PATCH 09/42] Move existing use of CONFIG_SPL_DM to Kconfig Simon Glass
[U-Boot] [PATCH 10/42] Move existing use of CONFIG_SPL_RSA to Kconfig Simon Glass
[U-Boot] [PATCH 11/42] Convert CONFIG_SPL_CRYPTO_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 12/42] Convert CONFIG_SPL_HASH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 13/42] Convert CONFIG_SPL_DMA_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 14/42] Convert CONFIG_SPL_DRIVERS_MISC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 15/42] Convert CONFIG_SPL_ENV_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 16/42] Convert CONFIG_SPL_ETH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 17/42] Convert CONFIG_SPL_EXT_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 18/42] Convert CONFIG_SPL_FAT_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 19/42] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 20/42] Convert CONFIG_SPL_I2C_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 21/42] Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 22/42] Convert CONFIG_SPL_LIBDISK_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 23/42] Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 24/42] Convert CONFIG_SPL_MMC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 25/42] Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 26/42] Convert CONFIG_SPL_MTD_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 27/42] Convert CONFIG_SPL_MUSB_NEW_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 28/42] Convert CONFIG_SPL_NAND_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 29/42] Convert CONFIG_SPL_NET_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 30/42] Convert CONFIG_SPL_NOR_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 31/42] Convert CONFIG_SPL_ONENAND_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 32/42] Convert CONFIG_SPL_PINCTRL_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 33/42] Convert CONFIG_SPL_POWER_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 34/42] Convert CONFIG_SPL_SATA_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 35/42] Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 36/42] Convert CONFIG_SPL_SPI_FLASH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 37/42] Convert CONFIG_SPL_SPI_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 38/42] Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 39/42] Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 40/42] Convert CONFIG_SPL_USB_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 41/42] Convert CONFIG_SPL_WATCHDOG_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 42/42] Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v3 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Simon Glass
[U-Boot] [PATCH 32/42] Convert CONFIG_SPL_PINCTRL_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 02/42] moveconfig: Add an option to commit changes Simon Glass
[U-Boot] [PATCH 01/42] moveconfig: Add an option to skip prompts Simon Glass
[U-Boot] [PATCH 07/42] Kconfig: spl: Add SPL support options to Kconfig Simon Glass
[U-Boot] [PATCH 00/42] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Simon Glass
[U-Boot] [RFC PATCH 2/2] Makefile: Give a build error if ad-hoc CONFIG options are added Simon Glass
[U-Boot] [PATCH 19/42] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH 06/42] Use separate options for TPL support Simon Glass
[U-Boot] [PATCH 06/42] Use separate options for TPL support Simon Glass
[U-Boot] [PATCH] rockchip: Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Simon Glass
[U-Boot] [PATCH 19/42] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Simon Glass
[U-Boot] EFI Stub compilation errors Simon Glass
[U-Boot] u-boot - raspberry pi Simon Glass
[U-Boot] [PATCH 02/42] moveconfig: Add an option to commit changes Simon Glass
[U-Boot] [PATCH 1/3 v2] Sandbox: document support of block device emulation Simon Glass
[U-Boot] [PATCH 2/3 v2] sandbox: Add "host size" hostfs command for fs test Simon Glass
[U-Boot] [PATCH 00/30] binman: A tool for creating firmware images Simon Glass
[U-Boot] Please pull u-boot-rockchip Simon Glass
[U-Boot] [PATCH 04/30] patman: Adjust command.Output() to raise an error by default Simon Glass
[U-Boot] [PATCH 05/30] dtoc: Move the struct import into the correct order Simon Glass
[U-Boot] [PATCH 06/30] dtoc: Move the fdt library selection into fdt_select Simon Glass
[U-Boot] [PATCH 07/30] dtoc: Rename fdt.py to fdt_normal.py Simon Glass
[U-Boot] [PATCH 08/30] dtoc: Create a base class for Fdt Simon Glass
[U-Boot] [PATCH 09/30] dtoc: Move BytesToValue() and GetEmpty() into PropBase Simon Glass
[U-Boot] [PATCH 10/30] dtoc: Move Widen() and GetPhandle() into the base class Simon Glass
[U-Boot] [PATCH 11/30] dtoc: Move a few more common functions into fdt.py Simon Glass
[U-Boot] [PATCH 12/30] patman: Add a tools library for using temporary files Simon Glass
[U-Boot] [PATCH 13/30] patman: Add a library to handle logging and progress Simon Glass
[U-Boot] [PATCH 14/30] dtoc: Allow the device tree to be compiled from source Simon Glass
[U-Boot] [PATCH 15/30] dtoc: Drop the convert_dash parameter to GetProps() Simon Glass
[U-Boot] [PATCH 16/30] dtoc: Prepare for supporting changing of device trees Simon Glass
[U-Boot] [PATCH 17/30] dtoc: Move to using bytearray Simon Glass
[U-Boot] [PATCH 18/30] dtoc: Support deleting device tree properties Simon Glass
[U-Boot] [PATCH 19/30] dtoc: Support packing the device tree Simon Glass
[U-Boot] [PATCH 20/30] dtoc: Support finding the offset of a property Simon Glass
[U-Boot] [PATCH 21/30] dtoc: Correct quotes in fdt_util Simon Glass
[U-Boot] [PATCH 22/30] dtoc: Add methods for reading data from properties Simon Glass
[U-Boot] [PATCH] rockchip: rk3288-firefly: enable boot from eMMC Simon Glass
[U-Boot] [PATCH] rockchip: Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Simon Glass
[U-Boot] [PATCH v2] sunxi: display: Use PWM to drive backlight where applicable Simon Glass
[U-Boot] [PATCH] README: add cmd directory description Simon Glass
[U-Boot] [RFC PATCH] rockchip: rk3288: skip lowlevel_init process Simon Glass
[U-Boot] [RESEND PATCH v2 1/5] rk3399: syscon: add support for pmugrf Simon Glass
[U-Boot] [RESEND PATCH v2 5/5] dts: rk3399: add pinctrl for sdmmc Simon Glass
[U-Boot] [RESEND PATCH v2 3/5] config: evb-rk3399: enable pinctrl driver Simon Glass
[U-Boot] [RESEND PATCH v2 4/5] rk3399: enable the pwm2/3 pinctrl in board init Simon Glass
[U-Boot] [RESEND PATCH v2 2/5] pinctrl: add driver for rk3399 Simon Glass
[U-Boot] [PATCH] rockchip: use dummy byte only enable OF_PLATDATA Simon Glass
[U-Boot] [PATCH 3/5] rk_pwm: use clock framework API to get module clock Simon Glass
[U-Boot] [PATCH 4/5] rk_pwm: remove grf setting code from driver Simon Glass
[U-Boot] [PATCH 5/5] rk3288: add arch_cpu_init for rk3288 Simon Glass
[U-Boot] [PATCH 4/4] RK3288 needs fdt and initrd below 256M now. Simon Glass
[U-Boot] [RFC PATCH 2/2] Makefile: Give a build error if ad-hoc CONFIG options are added Simon Glass
[U-Boot] [PATCH v2 2/3] x86: efi: Fix EFI 64-bit payload build warnings Simon Glass
[U-Boot] [PATCH v2 00/44] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 01/44] Correct defconfigs using savedefconfig Simon Glass
[U-Boot] [PATCH v2 02/44] moveconfig: Add an option to skip prompts Simon Glass
[U-Boot] [PATCH v2 03/44] moveconfig: Add an option to commit changes Simon Glass
[U-Boot] [PATCH v2 04/44] Kconfig: Move SPL settings into their own file Simon Glass
[U-Boot] [PATCH v2 05/44] arm: fsl: Adjust ordering of #ifndef CONFIG_SPL_BUILD Simon Glass
[U-Boot] [PATCH v2 06/44] Drop CONFIG_SPL_RAM_SUPPORT Simon Glass
[U-Boot] [PATCH v2 07/44] Use separate options for TPL support Simon Glass
[U-Boot] [PATCH v2 08/44] Kconfig: spl: Add SPL support options to Kconfig Simon Glass
[U-Boot] [PATCH v2 09/44] Kconfig: tpl: Add some TPL support options to Kconfig Simon Glass
[U-Boot] [PATCH v2 10/44] Move existing use of CONFIG_SPL_DM to Kconfig Simon Glass
[U-Boot] [PATCH v2 11/44] Move existing use of CONFIG_SPL_RSA to Kconfig Simon Glass
[U-Boot] [PATCH v2 12/44] spear: Use upper case for CONFIG options Simon Glass
[U-Boot] [PATCH v2 13/44] Convert CONFIG_SPL_CRYPTO_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 14/44] Convert CONFIG_SPL_HASH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 15/44] Convert CONFIG_SPL_DMA_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 16/44] Convert CONFIG_SPL_DRIVERS_MISC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 17/44] Convert CONFIG_SPL_ENV_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 18/44] Convert CONFIG_SPL_ETH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 19/44] Convert CONFIG_SPL_EXT_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 20/44] Convert CONFIG_SPL_FAT_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 22/44] Convert CONFIG_SPL_I2C_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 23/44] Convert CONFIG_SPL_LIBCOMMON_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 24/44] Convert CONFIG_SPL_LIBDISK_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 25/44] Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 26/44] Convert CONFIG_SPL_MMC_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 27/44] Convert CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 28/44] Convert CONFIG_SPL_MTD_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 29/44] Convert CONFIG_SPL_MUSB_NEW_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 30/44] Convert CONFIG_SPL_NAND_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 31/44] Convert CONFIG_SPL_NET_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 32/44] Convert CONFIG_SPL_NOR_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 33/44] Convert CONFIG_SPL_ONENAND_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 34/44] Convert CONFIG_SPL_PINCTRL_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 35/44] Convert CONFIG_SPL_POWER_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 36/44] Convert CONFIG_SPL_SATA_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 37/44] Convert CONFIG_SPL_SERIAL_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 38/44] Convert CONFIG_SPL_SPI_FLASH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 39/44] Convert CONFIG_SPL_SPI_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 40/44] Convert CONFIG_SPL_USBETH_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 41/44] Convert CONFIG_SPL_USB_HOST_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 42/44] Convert CONFIG_SPL_USB_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 43/44] Convert CONFIG_SPL_WATCHDOG_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 44/44] Convert CONFIG_SPL_YMODEM_SUPPORT to Kconfig Simon Glass
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Simon Glass
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Marcus Glocker
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Marcus Glocker
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Marcus Glocker
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Marcus Glocker
[U-Boot] [PATCH] ARM: dts: sun6i: Add defconfig and dts file for tablets using the inet-q972 PCB Hans de Goede
[U-Boot] [PATCH] sunxi: Sync dts files with upstream kernel Hans de Goede
[U-Boot] [PATCH] sunxi: Sync dts files with upstream kernel Hans de Goede
[U-Boot] [PATCH] sunxi: display: Use PWM to drive backlight where applicable Hans de Goede
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Hans de Goede
[U-Boot] [PATCH 1/2] sunxi: add proper device tree for iNet D978 rev2 boards Hans de Goede
[U-Boot] [PATCH] sunxi: display: Use PWM to drive backlight where applicable Hans de Goede
[U-Boot] [PATCH v2] sunxi: display: Use PWM to drive backlight where applicable Hans de Goede
[U-Boot] [PATCH 1/2] sunxi: add proper device tree for iNet D978 rev2 boards Hans de Goede
[U-Boot] [PATCH] sun5i: Add defconfig and dts file for the Empire Electronix M712 tablet Hans de Goede
[U-Boot] [PATCH v2] sunxi: display: Use PWM to drive backlight where applicable Hans de Goede
[U-Boot] [linux-sunxi] [PATCH] sunxi: Tune H3 DRAM PLL to improve lock time Hans de Goede
[U-Boot] Please pull u-boot-sunxi master Hans de Goede
[U-Boot] [PATCH v2 1/2] sunxi: add proper device tree for iNet D978 rev2 boards Hans de Goede
[U-Boot] [LEDE-DEV] Older u-boot mangles UBI from ubinize 1.5.2 Daniel Golle
[U-Boot] [LEDE-DEV] Older u-boot mangles UBI from ubinize 1.5.2 Daniel Golle
[U-Boot] [LEDE-DEV] Older u-boot mangles UBI from ubinize 1.5.2 Daniel Golle
[U-Boot] [LEDE-DEV] Older u-boot mangles UBI from ubinize 1.5.2 Daniel Golle
[U-Boot] [PATCH 1/2] net: fm: fix spi flash probe for using driver model Qianyu Gong
[U-Boot] [PATCH 8/8] armv8: ls1046ardb: Add LS1046ARDB board support Qianyu Gong
[U-Boot] [PATCH] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] Question on Enabling hypervisor mode in u-boot Alexander Graf
[U-Boot] Question on Enabling hypervisor mode in u-boot Alexander Graf
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Sanitize exposed devices Alexander Graf
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Alexander Graf
[U-Boot] [PATCH 1/7] x86: Move table csum into separate header Alexander Graf
[U-Boot] [PATCH 2/7] x86: Move smbios generation into arch independent directory Alexander Graf
[U-Boot] [PATCH 3/7] efi_loader: Expose efi_install_configuration_table Alexander Graf
[U-Boot] [PATCH 4/7] smbios: Allow compilation on 64bit systems Alexander Graf
[U-Boot] [PATCH 5/7] smbios: Expose in efi_loader as table Alexander Graf
[U-Boot] [PATCH 6/7] efi_loader: Fix efi_install_configuration_table Alexander Graf
[U-Boot] [PATCH 7/7] smbios: Provide serial number Alexander Graf
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Alexander Graf
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Alexander Graf
[U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program Alexander Graf
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Alexander Graf
[U-Boot] [PATCH 2/6] efi: Fix missing EFIAPI specifiers Alexander Graf
[U-Boot] [PATCH 4/6] x86: efi: Add EFI loader support for x86 Alexander Graf
[U-Boot] [PATCH 4/6] x86: efi: Add EFI loader support for x86 Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Alexander Graf
[U-Boot] [PATCH v2 5/7] smbios: Expose in efi_loader as table Alexander Graf
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH 1/2] bcm2835_gpio: Implement GPIOF_FUNC Alexander Graf
[U-Boot] [PATCH 2/2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Alexander Graf
[U-Boot] [PATCH v2 0/5] Enable caches for the RPi2 Alexander Graf
[U-Boot] [PATCH] ARM: make ARMV7_LPAE select PHYS_64BIT Alexander Graf
[U-Boot] [PATCH v2 7/7] smbios: Provide serial number Alexander Graf
[U-Boot] [PATCH 2/2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH] cmd: efi_loader: Return CMD_RET_USAGE in case of not enough arguments Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Alexander Graf
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Alexander Graf
[U-Boot] [PATCH 5/7] smbios: Expose in efi_loader as table Alexander Graf
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Alexander Graf
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Alexander Graf
[U-Boot] [PATCH 0/2] efi_loader: Implement reset on RPi Alexander Graf
[U-Boot] [PATCH v4 2/2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH v4 2/2] serial: bcm283x_mu: Detect disabled serial device Alexander Graf
[U-Boot] [PATCH 5/7] smbios: Expose in efi_loader as table Alexander Graf
[U-Boot] [PATCH v3 0/8] efi_loader: Expose SMBIOS table Alexander Graf
[U-Boot] [PATCH v3 1/8] x86: Move table csum into separate header Alexander Graf
[U-Boot] [PATCH v3 2/8] x86: Move smbios generation into arch independent directory Alexander Graf
[U-Boot] [PATCH v3 3/8] efi_loader: Expose efi_install_configuration_table Alexander Graf
[U-Boot] [PATCH v3 4/8] smbios: Allow compilation on 64bit systems Alexander Graf
[U-Boot] [PATCH v3 5/8] smbios: Generate type 4 on non-x86 systems Alexander Graf
[U-Boot] [PATCH v3 6/8] smbios: Expose in efi_loader as table Alexander Graf
[U-Boot] [PATCH v3 7/8] efi_loader: Fix efi_install_configuration_table Alexander Graf
[U-Boot] [PATCH v3 8/8] smbios: Provide serial number Alexander Graf
[U-Boot] ZynqMP breakage Alexander Graf
[U-Boot] [PATCH 0/5] armv8: Add generic PSCI client support Alexander Graf
[U-Boot] [PATCH 1/5] efi_loader: Allow boards to implement get_time and reset_system Alexander Graf
[U-Boot] [PATCH 2/5] arm: Disable HVC PSCI calls by default Alexander Graf
[U-Boot] [PATCH 3/5] arm: Add PSCI shutdown function Alexander Graf
[U-Boot] [PATCH 4/5] arm: Provide common PSCI based reset handler Alexander Graf
[U-Boot] [PATCH 5/5] efi_loader: Add generic PSCI RTS Alexander Graf
[U-Boot] [PATCH v3 1/8] x86: Move table csum into separate header Alexander Graf
[U-Boot] [PATCH v4 5/8] smbios: Generate type 4 on non-x86 systems Alexander Graf
[U-Boot] [PATCH v4 5/8] smbios: Generate type 4 on non-x86 systems Alexander Graf
[U-Boot] [PATCH v4 5/8] smbios: Generate type 4 on non-x86 systems Alexander Graf
[U-Boot] [PATCH 4/5] arm: Provide common PSCI based reset handler Alexander Graf
[U-Boot] [PATCH 5/5] efi_loader: Add generic PSCI RTS Alexander Graf
[U-Boot] [PATCH 1/5] efi_loader: Allow boards to implement get_time and reset_system Alexander Graf
[U-Boot] [PATCH 1/5] efi_loader: Allow boards to implement get_time and reset_system Alexander Graf
[U-Boot] [PATCH] efi_loader: Fix relocations above 64kb image size Alexander Graf
[U-Boot] [PATCH v6 00/10] efi_loader: Expose SMBIOS table Alexander Graf
[U-Boot] [PATCH v6 01/10] x86: Move table csum into separate file Alexander Graf
[U-Boot] [PATCH v6 01/10] x86: Move table csum into separate header Alexander Graf
[U-Boot] [PATCH v6 02/10] x86: Move smbios generation into arch independent directory Alexander Graf
[U-Boot] [PATCH v6 03/10] efi_loader: Expose efi_install_configuration_table Alexander Graf
[U-Boot] [PATCH v6 04/10] smbios: Allow compilation on 64bit systems Alexander Graf
[U-Boot] [PATCH v6 05/10] cpu: Add DMTF id and family fields Alexander Graf
[U-Boot] [PATCH v6 06/10] cpu: Add get_vendor callback Alexander Graf
[U-Boot] [PATCH v6 07/10] smbios: Generate type 4 on non-x86 systems Alexander Graf
[U-Boot] [PATCH v6 08/10] smbios: Expose in efi_loader as table Alexander Graf
[U-Boot] [PATCH v6 09/10] efi_loader: Fix efi_install_configuration_table Alexander Graf
[U-Boot] [PATCH v6 10/10] smbios: Provide serial number Alexander Graf
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Alexander Graf
[U-Boot] CACHE: Misaligned operation Clemens Gruber
[U-Boot] CACHE: Misaligned operation Clemens Gruber
[U-Boot] [RFC] mmc: fsl_esdhc: fix misaligned cache operation warning Clemens Gruber
[U-Boot] [PATCH] gunzip: cache-align write buffer memory Clemens Gruber
[U-Boot] [RFC] mmc: fsl_esdhc: fix misaligned cache operation warning Clemens Gruber
[U-Boot] [RFC PATCH 00/12] imx: mx6: add virtual mx6memcal board Tim Harvey
[U-Boot] [RFC PATCH 00/12] imx: mx6: add virtual mx6memcal board Tim Harvey
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Joe Hershberger
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Joe Hershberger
[U-Boot] [PATCH v2] net: smsc95xx: Use correct get_unaligned functions Joe Hershberger
[U-Boot] [PATCH v6 07/12] net: pch_gbe: Make 64 bit safe Joe Hershberger
[U-Boot] [PATCH] net: e1000: Fix the build with driver model and SPI EEPROM Joe Hershberger
[U-Boot] [PATCH v6 06/12] net: pch_gbe: Use dm_pci_map_bar to discover MMIO base Joe Hershberger
[U-Boot] [PATCH v6 07/12] net: pch_gbe: Make 64 bit safe Joe Hershberger
[U-Boot] [PATCH] net: e1000: Allow to use e1000 SPI command with DM Joe Hershberger
[U-Boot] [PATCH] net: e1000: Fix the build with driver model and SPI EEPROM Joe Hershberger
[U-Boot] [PATCH] net: e1000: Allow to use e1000 SPI command with DM Joe Hershberger
[U-Boot] [Patch v2] net: fm: fix spi flash probe for using driver model Joe Hershberger
[U-Boot] [PATCH v2 5/7] cmd/bdinfo: extract print_eth_ip_addr Joe Hershberger
[U-Boot] [RFC PATCH] net: macb: Fix build error for CONFIG_DM_ETH enabled Joe Hershberger
[U-Boot] [PATCH 0/7] net/ethoc improvements Joe Hershberger
[U-Boot] [PATCH 1/7] net/ethoc: add Kconfig entry for the driver Joe Hershberger
[U-Boot] [PATCH 2/7] net/ethoc: use priv instead of dev internally Joe Hershberger
[U-Boot] [PATCH 3/7] net/ethoc: add CONFIG_DM_ETH support Joe Hershberger
[U-Boot] [PATCH 4/7] net/ethoc: support device tree Joe Hershberger
[U-Boot] [PATCH 5/7] net/ethoc: don't mix virtual and physical addresses Joe Hershberger
[U-Boot] [PATCH 6/7] net/ethoc: support private memory configurations Joe Hershberger
[U-Boot] [PATCH 7/7] net/ethoc: implement MDIO bus and support phylib Joe Hershberger
[U-Boot] tegra124 jetson-tk1 ethernet problems. Joe Hershberger
[U-Boot] tegra124 jetson-tk1 ethernet problems. Joe Hershberger
[U-Boot] tegra124 jetson-tk1 ethernet problems. Joe Hershberger
[U-Boot] [PATCH v2 7/7] net/ethoc: implement MDIO bus and support phylib Joe Hershberger
[U-Boot] [PATCH v2 0/5] Remove calls from net drivers to legacy miiphy_register() entry-point Joe Hershberger
[U-Boot] [PATCH v2 1/5] scripts: Add a cocci patch for miiphy_register Joe Hershberger
[U-Boot] [PATCH v2 2/5] net: mii: Use spatch to update miiphy_register Joe Hershberger
[U-Boot] [PATCH v2 3/5] net: mii: Changes not made by spatch Joe Hershberger
[U-Boot] [PATCH v2 4/5] net: mii: Fix changes made by spatch Joe Hershberger
[U-Boot] [PATCH v2 5/5] net: mii: Clean up legacy glue that is not used Joe Hershberger
[U-Boot] [PATCH] drivers: net: cpsw: always flush cache with cache line aligned Joe Hershberger
[U-Boot] [PATCH v2] drivers: net: cpsw: always flush cache of size PKTSIZE_ALIGN Joe Hershberger
[U-Boot] [PATCH v2] drivers: net: cpsw: always flush cache of size PKTSIZE_ALIGN Joe Hershberger
[U-Boot] tegra124 jetson-tk1 ethernet problems. Joe Hershberger
[U-Boot] cmd: net: flush cache cacheline aligned Joe Hershberger
[U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt Joe Hershberger
[U-Boot] [PATCH 1/3] net: davinci_emac: Remove useless dcache ops on descriptors Joe Hershberger
[U-Boot] [PATCH 2/3] net: davinci_emac: Round up top buffer boundaries for dcache ops Joe Hershberger
[U-Boot] [PATCH 3/3] net: davinci_emac: Invalidate only the received portion of a buffer Joe Hershberger
[U-Boot] [PATCH v2 2/2] net: davinci_emac: Invalidate only the received portion of a buffer Joe Hershberger
[U-Boot] [PATCH v2 1/2] net: davinci_emac: Round up top tx buffer boundaries for dcache ops Joe Hershberger
[U-Boot] [PATCH 0/3] Clean up some NFS issues not related to v3 support Joe Hershberger
[U-Boot] [PATCH 1/3] net: Stop including NFS overhead in defragment max Joe Hershberger
[U-Boot] [PATCH 2/3] net: nfs: Remove separate buffer for default name Joe Hershberger
[U-Boot] [PATCH 3/3] net: nfs: Remove unused define Joe Hershberger
[U-Boot] [PATCH 0/9] Fix up issues with new NFSv3 implementation Joe Hershberger
[U-Boot] [PATCH 1/9] net: nfs: Share the file handle buffer for v2 / v3 Joe Hershberger
[U-Boot] [PATCH 2/9] net: nfs: Correct the reply data buffer size Joe Hershberger
[U-Boot] [PATCH 3/9] net: nfs: Fix lines that are too long Joe Hershberger
[U-Boot] [PATCH 4/9] net: nfs: Consolidate handling of NFSv3 attributes Joe Hershberger
[U-Boot] [PATCH 5/9] net: nfs: Correct a comment Joe Hershberger
[U-Boot] [PATCH 6/9] net: nfs: Use consistent names for the rpc_pkt Joe Hershberger
[U-Boot] [PATCH 7/9] net: nfs: Move some prints to debug statements Joe Hershberger
[U-Boot] [PATCH 8/9] net: nfs: Use the tx buffer to construct rpc msgs Joe Hershberger
[U-Boot] [PATCH 9/9] net: nfs: Simplify rpc_add_credentials() Joe Hershberger
[U-Boot] Pull request: u-boot-net.git master Joe Hershberger
[U-Boot] Pull request: u-boot-net.git master Joe Hershberger
[U-Boot] Pull request: u-boot-net.git master Joe Hershberger
[U-Boot] net: macb: Fix build error for CONFIG_DM_ETH enabled Joe Hershberger
[U-Boot] net: smsc95xx: Use correct get_unaligned functions Joe Hershberger
[U-Boot] net: e1000: Fix the build with driver model and SPI EEPROM Joe Hershberger
[U-Boot] net/ethoc: add Kconfig entry for the driver Joe Hershberger
[U-Boot] net/ethoc: use priv instead of dev internally Joe Hershberger
[U-Boot] net/ethoc: add CONFIG_DM_ETH support Joe Hershberger
[U-Boot] net/ethoc: support device tree Joe Hershberger
[U-Boot] net/ethoc: don't mix virtual and physical addresses Joe Hershberger
[U-Boot] net/ethoc: support private memory configurations Joe Hershberger
[U-Boot] net/ethoc: implement MDIO bus and support phylib Joe Hershberger
[U-Boot] scripts: Add a cocci patch for miiphy_register Joe Hershberger
[U-Boot] net: mii: Use spatch to update miiphy_register Joe Hershberger
[U-Boot] net: mii: Fix changes made by spatch Joe Hershberger
[U-Boot] net: mii: Changes not made by spatch Joe Hershberger
[U-Boot] net: mii: Clean up legacy glue that is not used Joe Hershberger
[U-Boot] [PATCH v2 0/5] Remove calls from net drivers to legacy miiphy_register() entry-point Joe Hershberger
[U-Boot] [PATCH] net/fm: Remove unused code of FMan QMI Joe Hershberger
[U-Boot] [PATCH 0/3] Clean up some NFS issues not related to v3 support Joe Hershberger
[U-Boot] [PATCH 0/9] Fix up issues with new NFSv3 implementation Joe Hershberger
[U-Boot] [PATCH] net: mii: check phy advertising register when geting link status Joe Hershberger
[U-Boot] [PATCH] net: davinci_emac: Restore the internal MDIO accessors return values Joe Hershberger
[U-Boot] [PATCH 1/4] tools: moveconfig: remove document about deprecated error message Joe Hershberger
[U-Boot] [PATCH 2/4] tools: moveconfig: use sets instead of lists for failed/suspicious boards Joe Hershberger
[U-Boot] Pull request: u-boot-net.git master Joe Hershberger
[U-Boot] net: Stop including NFS overhead in defragment max Joe Hershberger
[U-Boot] net: nfs: Remove separate buffer for default name Joe Hershberger
[U-Boot] net: nfs: Remove unused define Joe Hershberger
[U-Boot] net: NFS: Add NFSv3 support Joe Hershberger
[U-Boot] net: nfs: Share the file handle buffer for v2 / v3 Joe Hershberger
[U-Boot] net: nfs: Correct the reply data buffer size Joe Hershberger
[U-Boot] net: nfs: Fix lines that are too long Joe Hershberger
[U-Boot] net: nfs: Consolidate handling of NFSv3 attributes Joe Hershberger
[U-Boot] net: nfs: Correct a comment Joe Hershberger
[U-Boot] net: nfs: Use consistent names for the rpc_pkt Joe Hershberger
[U-Boot] net: nfs: Move some prints to debug statements Joe Hershberger
[U-Boot] net: nfs: Use the tx buffer to construct rpc msgs Joe Hershberger
[U-Boot] net: nfs: Simplify rpc_add_credentials() Joe Hershberger
[U-Boot] net: davinci_emac: Remove useless dcache ops on descriptors Joe Hershberger
[U-Boot] net: davinci_emac: Round up top tx buffer boundaries for dcache ops Joe Hershberger
[U-Boot] net: davinci_emac: Invalidate only the received portion of a buffer Joe Hershberger
[U-Boot] net/fm: Remove unused code of FMan QMI Joe Hershberger
[U-Boot] net: davinci_emac: Restore the internal MDIO accessors return values Joe Hershberger
[U-Boot] net: mii: check phy advertising register when geting link status Joe Hershberger
[U-Boot] [PATCH] net: mvneta: Round up top tx buffer boundaries for dcache ops Joe Hershberger
[U-Boot] [PATCH 2/3] arm/PSCI: Fixed the backward compatiblity issue Zhiqiang Hou
[U-Boot] [PATCH 2/3] arm/PSCI: Fixed the backward compatiblity issue Zhiqiang Hou
[U-Boot] [PATCHv2 1/5] fsl: serdes: ensure accessing the initialized maps of serdes protocol Zhiqiang Hou
[U-Boot] [PATCHv2 2/5] arm: fsl-layerscape: move forward the non-secure access permission setup Zhiqiang Hou
[U-Boot] [PATCHv2 3/5] fsl: csu: add an API to set individual device access permission Zhiqiang Hou
[U-Boot] [PATCH 4/5] fsl: csu: add an API to set R/W permission to PCIe Zhiqiang Hou
[U-Boot] [PATCHv2 4/5] fsl: csu: add an API to set R/W permission to PCIe Zhiqiang Hou
[U-Boot] [PATCHv2 5/5] fsl-layerscape: Add workaround for PCIe erratum A010315 Zhiqiang Hou
[U-Boot] [PATCH 4/5] fsl: csu: add an API to set R/W permission to PCIe Zhiqiang Hou
[U-Boot] [PATCH] net/fm: Remove unused code of FMan QMI Zhiqiang Hou
[U-Boot] [PATCH 3/8] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency Mingkai Hu
[U-Boot] [PATCH 7/8] armv8: ls1046a: disable SATA ECC in DCSR Mingkai Hu
[U-Boot] [PATCH 6/8] armv8: ls1046a: Enable DDR erratum for ls1046a Mingkai Hu
[U-Boot] [PATCH 1/8] drivers/ddr/fsl: add DEBUG_38 Mingkai Hu
[U-Boot] [PATCH 8/8] armv8: ls1046ardb: Add LS1046ARDB board support Mingkai Hu
[U-Boot] Squashfs filesystem support Frank Hunleth
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Kishon Vijay Abraham I
[U-Boot] [PATCH 1/2] omap3_pandora: Fix mmc loading of autoboot script to use correct syntax. Grazvydas Ignotas
[U-Boot] [PATCH 2/2] omap3_pandora: Switch to using "load" command to load the autoboot script. Grazvydas Ignotas
[U-Boot] [PATCH] ARM: rmobile: lager: Move rcar-gen2-common to rcar-common Nobuhiro Iwamatsu
[U-Boot] [PATCH] ARM: rmobile: Remove duplicate configs by Kconfig in rcar-gen3-common.h Nobuhiro Iwamatsu
[U-Boot] [PATCH] ARM: rmobile: salvator-x: Update defconfig Nobuhiro Iwamatsu
[U-Boot] [PATCH] ARM: rmobile: r8a7795: Add MMU layout Nobuhiro Iwamatsu
[U-Boot] Pull request: u-boot-sh/rmobile Nobuhiro Iwamatsu
[U-Boot] Resend: Pull request: u-boot-sh/rmobile Nobuhiro Iwamatsu
[U-Boot] [PATCH v2] ARM: rmobile: Move SoC sources to mach-rmobile Nobuhiro Iwamatsu
[U-Boot] Resend: Pull request: u-boot-sh/rmobile Nobuhiro Iwamatsu
[U-Boot] [v3] Pull request: u-boot-sh/rmobile Nobuhiro Iwamatsu
[U-Boot] [PATCH] net: e1000: Allow to use e1000 SPI command with DM Yaroslav K.
[U-Boot] [PATCH] net: e1000: Fix the build with driver model and SPI EEPROM Yaroslav K.
[U-Boot] [PATCH] Bug in cbfs Yaroslav K.
[U-Boot] [PATCH] net: e1000: Allow to use e1000 SPI command with DM Yaroslav K.
[U-Boot] [PATCH v2] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Yaroslav K.
[U-Boot] [PATCH] sunxi: Tune H3 DRAM PLL to improve lock time Thomas Kaiser
[U-Boot] [PATCH] MAINTAINERS, git-mailrc: Update the mmc maintainer Minkyu Kang
[U-Boot] [PATCH] mmc: s5p_sdhci: support the Driver model for Exynos Minkyu Kang
[U-Boot] Boot failure with a AT91RM9200 based custom board Peter Kardos
[U-Boot] [PATCH 1/2] power: regulator: act8846: fix reading values John Keeping
[U-Boot] [PATCH 2/2] power: pmic: act8846: add missing newline to debug statements John Keeping
[U-Boot] [PATCH 0/3] rockchip: i2c: fix >32 byte writes John Keeping
[U-Boot] [PATCH 1/3] rockchip: i2c: use named constant when appropriate John Keeping
[U-Boot] [PATCH 2/3] rockchip: i2c: move register write out of inner loop John Keeping
[U-Boot] [PATCH 3/3] rockchip: i2c: fix >32 byte writes John Keeping
[U-Boot] [PATCH] regulator: fixed: obey startup delay John Keeping
[U-Boot] Question on Enabling hypervisor mode in u-boot Keerthy
[U-Boot] Question on Enabling hypervisor mode in u-boot Keerthy
[U-Boot] Question on Enabling hypervisor mode in u-boot Keerthy
[U-Boot] Question on Enabling hypervisor mode in u-boot Keerthy
[U-Boot] Question on Enabling hypervisor mode in u-boot Keerthy
[U-Boot] [PATCH] ARM: board: cm_fx6: fix mtd partition fixup Nikita Kiryanov
[U-Boot] [PATCH v4] nitrogen6x : Use generic distro configuration Troy Kisky
[U-Boot] [PATCH] timer: Fix possible underflow in udelay Troy Kisky
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Glaucio Klipel
[U-Boot] [PATCH 1/2] fastboot: more support for reboot-bootloader command Paul Kocialkowski
[U-Boot] [PATCH 1/2] configs: ti_omap4_common: Include TWL6030 power and I2C support in SPL Paul Kocialkowski
[U-Boot] [PATCH 2/2] panda: Initialize MMC power from TWL6030 in SPL Paul Kocialkowski
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Paul Kocialkowski
[U-Boot] [PATCH 2/2] panda: Initialize MMC power from TWL6030 in SPL Paul Kocialkowski
[U-Boot] [PATCH v2 1/3] configs: ti_omap4_common: Include TWL6030 power and I2C support in SPL Paul Kocialkowski
[U-Boot] [PATCH v2 2/3] panda: Initialize MMC power from TWL6030 in SPL Paul Kocialkowski
[U-Boot] [PATCH v2 3/3] spl: Rework image header parse to allow abort on raw image and os boot Paul Kocialkowski
[U-Boot] [PATCH 1/2] fastboot: more support for reboot-bootloader command Paul Kocialkowski
[U-Boot] Problem using non-default init files Thomas Koeller
[U-Boot] [PATCH] sunxi: display: Use PWM to drive backlight where applicable Peter Korsgaard
[U-Boot] [PATCH v2] sunxi: display: Use PWM to drive backlight where applicable Peter Korsgaard
[U-Boot] Permission denied make: *** [core-dependencies] Error 126 in Buildroot-2015.08.1 Peter Korsgaard
[U-Boot] [PATCH] spi: tegra20: fix mode selection logic Mirza Krak
[U-Boot] [PATCH] spi: tegra20: fix mode selection logic Mirza Krak
[U-Boot] Disable command at runtime Petr Kubizňák
[U-Boot] Disable command at runtime Petr Kubizňák
[U-Boot] Disable command at runtime Petr Kubizňák
[U-Boot] A64 fastboot, faster way to compile/test Sergey Kubushyn
[U-Boot] [PATCH 3/8] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency Prabhakar Kushwaha
[U-Boot] [PATCH 8/8] armv8: ls1046ardb: Add LS1046ARDB board support Prabhakar Kushwaha
[U-Boot] [PATCH] sunxi: Tune H3 DRAM PLL to improve lock time Jens Kuske
[U-Boot] [PATCH v4] nitrogen6x : Use generic distro configuration Fabien Lahoudere
[U-Boot] [PATCH] net: mii: check phy advertising register when geting link status Dongpo Li
[U-Boot] mx7: ums command does not mount SD card partitions Ye Li
[U-Boot] mx7: ums command does not mount SD card partitions Ye Li
[U-Boot] [PATCH 1/2] warp7: Modify fdt_file environment variable Breno Lima
[U-Boot] [PATCH v2] warp7: Modify fdt_file environment variable Breno Lima
[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size" Breno Lima
[U-Boot] [PATCH 1/2] mmc: dw_mmc: transfer proper bytes to FIFO Shawn Lin
[U-Boot] [PATCH] nand: Fix set_dev checks for no device Tony Lindgren
[U-Boot] [PATCH] nand: Fix set_dev checks for no device Tony Lindgren
[U-Boot] [PATCH] nand: Fix set_dev checks for no device Tony Lindgren
[U-Boot] [PATCHv3] nand: Fix set_dev checks for no device Tony Lindgren
[U-Boot] [PATCH] nand: Fix set_dev checks for no device Tony Lindgren
[U-Boot] [PATCH] nand: Fix nand info for no device Tony Lindgren
[U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program Leif Lindholm
[U-Boot] [PATCH 1/2] driver/ddr/fsl: Add general MMDC driver Shengzhou Liu
[U-Boot] [PATCH 2/2] armv8:ls1012a: Use common MMDC driver for ls1012a Shengzhou Liu
[U-Boot] [PATCH 1/2] driver/ddr/fsl: Add general MMDC driver Shengzhou Liu
[U-Boot] [PATCH 1/2 v2] driver/ddr/fsl: Add general MMDC driver Shengzhou Liu
[U-Boot] [PATCH 2/2 v2] armv8:ls1012a: Use common MMDC driver for ls1012a Shengzhou Liu
[U-Boot] [PATCH 1/2] driver/ddr/fsl: Add general MMDC driver Shengzhou Liu
[U-Boot] [PATCH] armv8: fsl-layerscape: Update ddr erratum a008336 Shengzhou Liu
[U-Boot] [PATCH] driver/ddr/fsl: Add general MMDC driver and reuse common MMDC driver for ls1012a Shengzhou Liu
[U-Boot] [PATCH 1/2] driver/ddr/fsl: Add more debug registers Shengzhou Liu
[U-Boot] [PATCH 2/2] driver/ddr/fsl: Revise workaround A008511 for A009803 Shengzhou Liu
[U-Boot] [PATCH 1/8] drivers/ddr/fsl: add DEBUG_38 Shengzhou Liu
[U-Boot] [PATCH 6/8] armv8: ls1046a: Enable DDR erratum for ls1046a Shengzhou Liu
[U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards Yangbo Lu
[U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards Yangbo Lu
[U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards Yangbo Lu
[U-Boot] [v2] mmc: send CMD0 before CMD1 for some MMC cards Yangbo Lu
[U-Boot] [v2, 1/5] mmc: fsl_esdhc: don't set XFERTYP_RSPTYP_48_BUSY for CMD with busy response Yangbo Lu
[U-Boot] [v2, 2/5] mmc: send STOP command when the READ/WRITE commands fail Yangbo Lu
[U-Boot] [v2, 3/5] mmc: fsl_esdhc: add error recovery for data transfer with Auto CMD12 Yangbo Lu
[U-Boot] [v2, 4/5] mmc: add workaround for eSDHC erratum A009620 Yangbo Lu
[U-Boot] [v2, 5/5] arch/arm, arch/powerpc: enable workaround for eSDHC erratum A009620 Yangbo Lu
[U-Boot] [v2] mmc: send CMD0 before CMD1 for some MMC cards Yangbo Lu
[U-Boot] [PATCH] warp7: Add PMIC support Vanessa Maegima
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model Sanchayan Maity
[U-Boot] [PATCH v1 2/4] ARM: dts: vf: Add device tree node for USB on Vybrid Sanchayan Maity
[U-Boot] [PATCH v1 3/4] ARM: dts: vf-colibri: Enable USB device tree node for Colibri Vybrid Sanchayan Maity
[U-Boot] [PATCH v1 4/4] configs: colibri_vf_defconfig: Enable USB driver model for Colibri Vybrid Sanchayan Maity
[U-Boot] [PATCH] cmd: dfu: Add error handling for failed registration Sanchayan Maity
[U-Boot] [PATCH v2 0/4] Migrate Vybrid USB driver to driver model Sanchayan Maity
[U-Boot] [PATCH v2 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model Sanchayan Maity
[U-Boot] [PATCH v2 2/4] ARM: dts: vf: Add device tree node for USB on Vybrid Sanchayan Maity
[U-Boot] [PATCH v2 3/4] ARM: dts: vf-colibri: Enable USB device tree node for Colibri Vybrid Sanchayan Maity
[U-Boot] [PATCH v2 4/4] configs: colibri_vf_defconfig: Enable USB driver model for Colibri Vybrid Sanchayan Maity
[U-Boot] [PATCH 1/2] mmc: sdhci: set to INT_DATA_END when there are data Lukasz Majewski
[U-Boot] [PATCH] cmd: dfu: Add error handling for failed registration Lukasz Majewski
[U-Boot] [RFC PATCH] ARM: cache: cp15: Align addresses when initial page_table setup is flushed Lukasz Majewski
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model Lukasz Majewski
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model Lukasz Majewski
[U-Boot] [RFC PATCH] ARM: cache: cp15: Align addresses when initial page_table setup is flushed Lukasz Majewski
[U-Boot] [RFC PATCH] ARM: cache: cp15: Align addresses when initial page_table setup is flushed Lukasz Majewski
[U-Boot] CACHE: Misaligned operation Lukasz Majewski
[U-Boot] [RFC PATCH] ARM: cache: cp15: Align addresses when initial page_table setup is flushed Lukasz Majewski
[U-Boot] UMS - maintain connection Lukasz Majewski
[U-Boot] [GIT] Pull request: u-boot-dfu Lukasz Majewski
[U-Boot] [GIT] Pull request: u-boot-dfu Lukasz Majewski
[U-Boot] [GIT] Pull request: u-boot-dfu Lukasz Majewski
[U-Boot] [GIT] Pull request: u-boot-dfu Lukasz Majewski
[U-Boot] [GIT] Pull request: u-boot-dfu Lukasz Majewski
[U-Boot] [GIT] Pull request: u-boot-dfu Lukasz Majewski
[U-Boot] [PATCH 1/3 v2] ext4: fix possible crash on directory traversal, ignore deleted entries Lukasz Majewski
[U-Boot] [PATCH 2/3] ext4: propagate error if creation of directory entry fails Lukasz Majewski
[U-Boot] [PATCH 3/3] ext4: Do not crash when trying to grow a directory using extents Lukasz Majewski
[U-Boot] [PATCH 1/2] ext4: Avoid corruption of directories with hash tree indexes Lukasz Majewski
[U-Boot] [PATCH 2/2] ext4: scan all directory blocks when looking up an entry Lukasz Majewski
[U-Boot] [PATCH 0/2] ext4: more fixes for possible file system corruption Lukasz Majewski
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Lukasz Majewski
[U-Boot] [ANN] U-Boot v2016.09-rc2 released Lukasz Majewski
[U-Boot] [RFC v1 PATCH] ARM7: Kconfig: cache: fix cacheline size based on arm type Lukasz Majewski
[U-Boot] [PATCH v3 04/13] ext4: Scan all directory blocks for space when inserting a new entry Lukasz Majewski
[U-Boot] [PATCH v3 07/13] ext4: only update number of of unused inodes if GDT_CSUM feature is set Lukasz Majewski
[U-Boot] [PATCH v3 08/13] ext4: do not clear zalloc'ed buffers a second time Lukasz Majewski
[U-Boot] [PATCH v3 09/13] ext4: After completely filled group, scan next group from the beginning Lukasz Majewski
[U-Boot] [PATCH v3 10/13] ext4: Avoid out-of-bounds access of block bitmap Lukasz Majewski
[U-Boot] [PATCH v3 11/13] ext4: Fix memory leak in case of failure Lukasz Majewski
[U-Boot] [PATCH v3 12/13] ext4: Use correct value for inode size even on revision 0 filesystems Lukasz Majewski
[U-Boot] [PATCH v3 13/13] ext4: initialize full inode for inodes bigger than 128 bytes Lukasz Majewski
[U-Boot] [GIT] Pull request: u-boot-dfu Lukasz Majewski
[U-Boot] [PATCH v2] cmd: dfu: Add error handling for board_usb_init Lukasz Majewski
[U-Boot] [PATCH] getting ubifs to run Marco
[U-Boot] [PATCH] getting ubifs to run Hoefle Marco
[U-Boot] WG: [PATCH] getting ubifs to run Hoefle Marco
[U-Boot] imx7 u-boot nand update from u-boot Belisko Marek
[U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) George McCollister
[U-Boot] [PATCH] x86: cache.h: Add default for CONFIG_SYS_CACHELINE_SIZE Bin Meng
[U-Boot] [PATCH v2] x86: baytrail: Add SIO HS-UART clock setup Bin Meng
[U-Boot] [PATCH v3] misc: Add simple driver for some Nuvoton NCT6102D devices Bin Meng
[U-Boot] [PATCH v2] x86: som-db5800-som-6867: fix SERIRQ on reset Bin Meng
[U-Boot] buildman error? Bin Meng
[U-Boot] buildman error? Bin Meng
[U-Boot] [PATCH] x86: bayleybay: Add PS/2 keyboard and mouse to ASL file Bin Meng
[U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Bin Meng
[U-Boot] [PATCH] Bug in cbfs Bin Meng
[U-Boot] [PATCH] x86: bayleybay: Add PS/2 keyboard and mouse to ASL file Bin Meng
[U-Boot] [PATCH 1/2] bdinfo: Don't print out empty DRAM banks Bin Meng
[U-Boot] [PATCH 2/2] x86: bdinfo: Drop meaningless values Bin Meng
[U-Boot] [PATCH 1/2] i2c: Drop redundant platform data setting in drivers Bin Meng
[U-Boot] [PATCH 2/2] x86: i2c: Avoid using BSS before it is available Bin Meng
[U-Boot] [PATCH 1/2] bdinfo: Don't print out empty DRAM banks Bin Meng
[U-Boot] [PATCH 2/2] x86: bdinfo: Drop meaningless values Bin Meng
[U-Boot] [PATCH] Bug in cbfs Bin Meng
[U-Boot] [PATCH v2] cbfs: Fix incorrect CBFS file header size being used Bin Meng
[U-Boot] [PATCH v2] cbfs: Fix incorrect CBFS file header size being used Bin Meng
[U-Boot] [PATCH 0/7] efi_loader: Expose SMBIOS table Bin Meng
[U-Boot] [PATCH 1/6] x86: Add implementations of setjmp() and longjmp() Bin Meng
[U-Boot] [PATCH 2/6] efi: Fix missing EFIAPI specifiers Bin Meng
[U-Boot] [PATCH 3/6] arm: efi: Add a hello world test program Bin Meng
[U-Boot] [PATCH 4/6] x86: efi: Add EFI loader support for x86 Bin Meng
[U-Boot] [PATCH 5/6] x86: efi: Add a hello world test program Bin Meng
[U-Boot] [PATCH 6/6] x86: Enable EFI loader support Bin Meng
[U-Boot] [PATCH 1/7] x86: Move table csum into separate header Bin Meng
[U-Boot] [PATCH 2/7] x86: Move smbios generation into arch independent directory Bin Meng
[U-Boot] [PATCH 4/7] smbios: Allow compilation on 64bit systems Bin Meng
[U-Boot] [PATCH 5/7] smbios: Expose in efi_loader as table Bin Meng
[U-Boot] [PATCH 7/7] smbios: Provide serial number Bin Meng
[U-Boot] [PATCH 1/6] x86: Add implementations of setjmp() and longjmp() Bin Meng
[U-Boot] [PATCH v2 00/22] spi/sf: Updates on flash detection Bin Meng
[U-Boot] [PATCH v2 00/22] spi/sf: Updates on flash detection Bin Meng
[U-Boot] [PATCH v2 5/7] smbios: Expose in efi_loader as table Bin Meng
[U-Boot] [PATCH v2 7/7] smbios: Provide serial number Bin Meng
[U-Boot] [PATCH v2] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Bin Meng
[U-Boot] [PATCH] x86: conga-qeval20-qa3: Add SMBus support and SMSC2513 config code Bin Meng
[U-Boot] [PATCH 1/2 v3] x86: Add DFI BT700 BayTrail board support Bin Meng
[U-Boot] [PATCH 2/2] x86: Add theadorable-x86-dfi-bt700 board support Bin Meng
[U-Boot] [PATCH 1/2 v3] x86: Add DFI BT700 BayTrail board support Bin Meng
[U-Boot] building u-boot x86 with device tree disabled , still refers to device tree function Bin Meng
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Bin Meng
[U-Boot] [PATCH] cmd: efi_loader: Return CMD_RET_USAGE in case of not enough arguments Bin Meng
[U-Boot] [PATCH v2] cmd: efi_loader: Return CMD_RET_USAGE in case of not enough arguments Bin Meng
[U-Boot] [PATCH 1/2 v3] x86: Add DFI BT700 BayTrail board support Bin Meng
[U-Boot] buildman error Bin Meng
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Bin Meng
[U-Boot] [PATCH] x86: conga-qeval20-qa3: Add missing MAINTERNERS entry Bin Meng
[U-Boot] [PATCH] x86: conga-qeval20-qa3: Add missing MAINTERNERS entry Bin Meng
[U-Boot] [PATCH 2/2 v2] x86: Add theadorable-x86-dfi-bt700 board support Bin Meng
[U-Boot] [PATCH 1/2 v4] x86: Add DFI BT700 BayTrail board support Bin Meng
[U-Boot] Please pull u-boot-x86 Bin Meng
[U-Boot] [PATCH v3 6/8] smbios: Expose in efi_loader as table Bin Meng
[U-Boot] [PATCH v3 5/8] smbios: Generate type 4 on non-x86 systems Bin Meng
[U-Boot] [PATCH v4 5/8] smbios: Generate type 4 on non-x86 systems Bin Meng
[U-Boot] [x86] Error building for qemu-x86 as EFI payload Bin Meng
[U-Boot] [PATCH 1/3] x86: efi: payload: Make efi payload build again Bin Meng
[U-Boot] [PATCH 2/3] x86: efi: payload: Correct BITS_PER_LONG to 32 Bin Meng
[U-Boot] [PATCH 3/3] x86: qemu: efi: Add two boards for EFI 32-bit and 64-bit payload Bin Meng
[U-Boot] [PATCH 2/3] x86: efi: payload: Correct BITS_PER_LONG to 32 Bin Meng
[U-Boot] [PATCH v2 1/3] x86: efi: payload: Make EFI payload build again Bin Meng
[U-Boot] [PATCH v2 2/3] x86: efi: Fix EFI 64-bit payload build warnings Bin Meng
[U-Boot] [PATCH v2 3/3] x86: qemu: efi: Add two boards for EFI 32-bit and 64-bit payload Bin Meng
[U-Boot] [PATCH 01/30] x86: Add debugging when a microcode update fails Bin Meng
[U-Boot] [PATCH 02/30] x86: ivybridge: Allow microcode to be collated Bin Meng
[U-Boot] [PATCH 03/30] x86: Add debugging when cpu_common_init() fails Bin Meng
[U-Boot] [PATCH v2 2/3] x86: efi: Fix EFI 64-bit payload build warnings Bin Meng
[U-Boot] [PATCH v2 1/3] x86: efi: payload: Make EFI payload build again Bin Meng
[U-Boot] [PATCH v2 2/3] x86: efi: Fix EFI 64-bit payload build warnings Bin Meng
[U-Boot] [PATCH v2 3/3] x86: qemu: efi: Add two boards for EFI 32-bit and 64-bit payload Bin Meng
[U-Boot] Please pull u-boot-x86 Bin Meng
[U-Boot] Disable command at runtime Ladislav Michl
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Ladislav Michl
[U-Boot] Older u-boot mangles UBI from ubinize 1.5.2 J Mo
[U-Boot] [LEDE-DEV] Older u-boot mangles UBI from ubinize 1.5.2 J Mo
[U-Boot] [LEDE-DEV] Older u-boot mangles UBI from ubinize 1.5.2 J Mo
[U-Boot] [LEDE-DEV] Older u-boot mangles UBI from ubinize 1.5.2 J Mo
[U-Boot] Older u-boot mangles UBI from ubinize 1.5.2 J Mo
[U-Boot] [PATCH 2/7] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Dan Murphy
[U-Boot] [PATCH 3/7] arm: omap-common: Enable support for K2 HS devices in u-boot Dan Murphy
[U-Boot] [PATCH 0/5] Enabling multi port ethernet support for keystone net Mugunthan V N
[U-Boot] [PATCH 1/5] drivers: net: keystone_net: fix line termination with semi-colon Mugunthan V N
[U-Boot] [PATCH 2/5] drivers: net: keystone_net: add support for multi slave ethernet Mugunthan V N
[U-Boot] [PATCH 3/5] configs: k2hk_evm: add random eth address support Mugunthan V N
[U-Boot] [PATCH 4/5] configs: k2e_evm: add random eth address support Mugunthan V N
[U-Boot] [PATCH 5/5] configs: k2l_evm: add random eth address support Mugunthan V N
[U-Boot] [PATCH v3 1/5] gpio: Add driver for TI PCF8575 I2C GPIO expander Mugunthan V N
[U-Boot] [PATCH v3 2/5] ARM: dra7xx_evm: Enable support for TI PCF8575 Mugunthan V N
[U-Boot] [PATCH v3 3/5] ARM: dts: dra7xx: Add u-boot specific property for PCF8575 nodes Mugunthan V N
[U-Boot] [PATCH v3 4/5] net: cpsw: Add support to drive gpios for ethernet to be functional Mugunthan V N
[U-Boot] [PATCH v3 5/5] ARM: dts: dra72-evm: Add mode-gpios entry for mac node Mugunthan V N
[U-Boot] [PATCH v2] drivers: net: cpsw: always flush cache of size PKTSIZE_ALIGN Mugunthan V N
[U-Boot] [PATCH 1/4] drivers: mmc: omap_hsmmc: fix build breakage Mugunthan V N
[U-Boot] [PATCH 2/4] ARM: dts: K2G: Add support for MMC controller Mugunthan V N
[U-Boot] [PATCH 3/4] ARM: dts: k2g-evm: enable mmc/sd suppport Mugunthan V N
[U-Boot] [PATCH 4/4] defconfig: k2g_evm_defconfig: Enable mmc driver model Mugunthan V N
[U-Boot] [PATCH] configs: dra7xx_evm: enable eth driver model Mugunthan V N
[U-Boot] [PATCH] defconfig: am43xx_evm: enable eth driver model Mugunthan V N
[U-Boot] [PATCH v3] drivers: net: cpsw: always flush cache of size aligned to PKTALIGN Mugunthan V N
[U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt Mugunthan V N
[U-Boot] [PATCH v2 1/2] net: davinci_emac: Round up top tx buffer boundaries for dcache ops Mugunthan V N
[U-Boot] [PATCH v2 2/2] net: davinci_emac: Invalidate only the received portion of a buffer Mugunthan V N
[U-Boot] [PATCH] ARM: dts: dra72-evm: fix broken ethernet Mugunthan V N
[U-Boot] [PATCH] mx6ul_14x14_evk: don't use array for SD2 card detect pad Eric Nelson
[U-Boot] [PATCH 1/3] arm: imx-common: add SECURE_BOOT option to Kconfig Eric Nelson
[U-Boot] [PATCH 2/3] arm: imx-common: introduce back usec2ticks Eric Nelson
[U-Boot] [PATCH 3/3] nitrogen6x: add secure boot support Eric Nelson
[U-Boot] [PATCH 1/3] arm: imx-common: add SECURE_BOOT option to Kconfig Eric Nelson
[U-Boot] [RFC PATCH 00/12] imx: mx6: add virtual mx6memcal board Eric Nelson
[U-Boot] mx6ul_14x14_evk Eric Nelson
[U-Boot] mx6ul_14x14_evk Eric Nelson
[U-Boot] mx6ul_14x14_evk Eric Nelson
[U-Boot] [PATCH] gunzip: cache-align write buffer memory Eric Nelson
[U-Boot] [PATCH] mx6ul_14x14_evk: Fix DDR calibration values Eric Nelson
[U-Boot] [PATCH] mx6ul_14x14_evk: Fix DDR calibration values Eric Nelson
[U-Boot] [PATCH v2 3/3] mx6ul_14x14_ev: Enable the CCGR clocks earlier Eric Nelson
[U-Boot] [PATCH v2 1/3] mx6: ddr: Adjust MDREF register settings for MX6UL Eric Nelson
[U-Boot] [PATCH] mx6ul_14x14_evk: Fix DDR calibration values Eric Nelson
[U-Boot] [PATCH v2 1/3] mx6: ddr: Adjust MDREF register settings for MX6UL Eric Nelson
[U-Boot] [PATCH v2 1/3] mx6: ddr: Adjust MDREF register settings for MX6UL Eric Nelson
[U-Boot] [PATCH v3 1/4] mx6: ddr: Allow changing REFSEL and REFR fields Eric Nelson
[U-Boot] [PATCH v3 1/4] mx6: ddr: Allow changing REFSEL and REFR fields Eric Nelson
[U-Boot] [PATCH v4 3/4] mx6ul_14x14_evk: Adjust SPL DDR3 settings Eric Nelson
[U-Boot] [PATCH v4 1/4] mx6: ddr: Allow changing REFSEL and REFR fields Eric Nelson
[U-Boot] [PATCH v4 2/4] mx6ul_14x14_evk: Pass refsel and refr fields to avoid hang Eric Nelson
[U-Boot] [RFC] board/liteboard: Add support for liteSOM and liteBoard Marcin Niestroj
[U-Boot] [PATCH 0/4] k2g: switch mmc/sd to driver model Sekhar Nori
[U-Boot] [PATCH 1/4] drivers: mmc: omap_hsmmc: fix build breakage Sekhar Nori
[U-Boot] [PATCH 2/4] ARM: dts: K2G: Add support for MMC controller Sekhar Nori
[U-Boot] [PATCH 3/4] ARM: dts: k2g-evm: enable mmc/sd suppport Sekhar Nori
[U-Boot] [PATCH 4/4] defconfig: k2g_evm_defconfig: Enable mmc driver model Sekhar Nori
[U-Boot] [PATCH] drivers: net: keystone_net: add rgmii link type support when parsing dt Sekhar Nori
[U-Boot] [PATCH 0/3] AM57x EVM: Enable USB DFU support Sekhar Nori
[U-Boot] [PATCH 1/3] configs: dra7xx: get rid of duplicate #define Sekhar Nori
[U-Boot] [PATCH 2/3] board: ti: am57xx-evm: fix build warnings Sekhar Nori
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Sekhar Nori
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Sekhar Nori
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Sekhar Nori
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Sekhar Nori
[U-Boot] [PATCH v1 1/2] arm: mvebu: Add support for NAND interface on A-38x Chris Packham
[U-Boot] [PATCH v1 2/2] arm: mvebu: Define NAND interface pins for A-38x Chris Packham
[U-Boot] [PATCH v1] spl: Remove unused CONFIG_SPL_SPI_* definitions Chris Packham
[U-Boot] [PATCH v1] arm: mvebu: a38x: update serdes error handling Chris Packham
[U-Boot] [PATCH v1] arm: mvebu: a38x: typo fix cpabilities -> capbilities Chris Packham
[U-Boot] [PATCH v1 2/2] arm: mvebu: Define NAND interface pins for A-38x Chris Packham
[U-Boot] [PATCH v1 2/2] arm: mvebu: Define NAND interface pins for A-38x Chris Packham
[U-Boot] [PATCH v1 1/2] net: Add support for mv88e609x switches Chris Packham
[U-Boot] [PATCH v1 2/2] net: mv88e61xx: Add support for fixed links Chris Packham
[U-Boot] [PATCH v1] mtd: nand: pxa3xx: use nand_set_controller_data Chris Packham
[U-Boot] [BUG] divide by 0 in spi flash probe Chris Packham
[U-Boot] [BUG] divide by 0 in spi flash probe Chris Packham
[U-Boot] [PATCH] net: mvneta: fix typo in comment Chris Packham
[U-Boot] [BUG] divide by 0 in spi flash probe Chris Packham
[U-Boot] [PATCH v2 1/3] Kconfig: Added new kconfig entry for IDENT_STRING Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 2/3] zynqmp: Move config IDENT_STRING to defconfig Siva Durga Prasad Paladugu
[U-Boot] [PATCH v2 3/3] zynqmp: Remove unnnecessary board config file for dc4 Siva Durga Prasad Paladugu
[U-Boot] [PATCH] nand: arasan_nfc: Clear ecc on bit while sending read command Siva Durga Prasad Paladugu
[U-Boot] u-boot-imx: watchdog driver always asserts WDOG1_B? Ross Parker
[U-Boot] [PATCH] imx_watchdog: Do not assert WDOG_B on watchdog init Ross Parker
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions Sandy Patterson
[U-Boot] [PATCH v2 3/3] CONFIG_EFI_LOADER breaks rock2 kernel loading Sandy Patterson
[U-Boot] [PATCH] rockchip: Fix SPL console output when ROCKCHIP_SPL_BACK_TO_BROM is enabled Sandy Patterson
[U-Boot] [PATCH] rockchip: Fix SPL console output when ROCKCHIP_SPL_BACK_TO_BROM is enabled Sandy Patterson
[U-Boot] disabling mmc in spl when booting using bootrom Sandy Patterson
[U-Boot] disabling mmc in spl when booting using bootrom Sandy Patterson
[U-Boot] disabling mmc in spl when booting using bootrom Sandy Patterson
[U-Boot] [PATCH] rockchip: Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Sandy Patterson
[U-Boot] [PATCH] rockchip: Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Sandy Patterson
[U-Boot] [PATCH] rockchip: Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Sandy Patterson
[U-Boot] [PATCH 4/4] RK3288 needs fdt and initrd below 256M now. Sandy Patterson
[U-Boot] [PATCH v2 0/2] With this change the SPL binary shrinks from 32k to 23k when Sandy Patterson
[U-Boot] [PATCH v2 1/2] Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Sandy Patterson
[U-Boot] [PATCH v2 2/2] Enable ROCKCHIP_SPL_BACK_TO_BROM for rock2 board Sandy Patterson
[U-Boot] [PATCH v2 2/2] Enable ROCKCHIP_SPL_BACK_TO_BROM for rock2 board Sandy Patterson
[U-Boot] [PATCH v3 0/2] With this change the SPL binary shrinks from 32k to 23k when Sandy Patterson
[U-Boot] [PATCH v3 1/2] Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Sandy Patterson
[U-Boot] [PATCH v3 2/2] Enable ROCKCHIP_SPL_BACK_TO_BROM for rock2 board Sandy Patterson
[U-Boot] Ethernet on FDI3250 board Jonatan Personal
[U-Boot] Error building for qemu-x86 as EFI payload Yan Phenix
[U-Boot] [x86] Error building for qemu-x86 as EFI payload Yan Phenix
[U-Boot] 答复: *** Your dtc is too old, please upgrade to dtc 1.4 or newer make: *** [checkdtc] Error 1 Yan Phenix
[U-Boot] x86: How to run UEFI BIOS + u-boot + linux on haswell/broadwell board? Yan Phenix
[U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Andre Przywara
[U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" André Przywara
[U-Boot] [PATCH] pbl: use "wait" command instead of "flush" command Zhao Qiang
[U-Boot] [Patch v2] net: fm: fix spi flash probe for using driver model Gong Qianyu
[U-Boot] [PATCH 0/8] Add LS1046ARDB board support Gong Qianyu
[U-Boot] [PATCH 1/8] drivers/ddr/fsl: add DEBUG_38 Gong Qianyu
[U-Boot] [PATCH 2/8] ddr: fsl: fix a compile issue Gong Qianyu
[U-Boot] [PATCH 3/8] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency Gong Qianyu
[U-Boot] [PATCH 4/8] Export memset for standalone AQ FW load apps Gong Qianyu
[U-Boot] [PATCH 5/8] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app Gong Qianyu
[U-Boot] [PATCH 6/8] armv8: ls1046a: Enable DDR erratum for ls1046a Gong Qianyu
[U-Boot] [PATCH 7/8] armv8: ls1046a: disable SATA ECC in DCSR Gong Qianyu
[U-Boot] [PATCH 8/8] armv8: ls1046ardb: Add LS1046ARDB board support Gong Qianyu
[U-Boot] [Patch v2 0/7] Add LS1046ARDB board support Gong Qianyu
[U-Boot] [Patch v2 1/7] ddr: fsl: fix a compile issue Gong Qianyu
[U-Boot] [Patch v2 2/7] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency Gong Qianyu
[U-Boot] [Patch v2 3/7] Export memset for standalone AQ FW load apps Gong Qianyu
[U-Boot] [Patch v2 4/7] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app Gong Qianyu
[U-Boot] [Patch v2 5/7] armv8: ls1046a: Enable DDR erratum for ls1046a Gong Qianyu
[U-Boot] [Patch v2 6/7] armv8: ls1046a: disable SATA ECC in DCSR Gong Qianyu
[U-Boot] [Patch v2 7/7] armv8: ls1046ardb: Add LS1046ARDB board support Gong Qianyu
[U-Boot] [PATCH 0/4] am335x-icev2: Ethernet support Roger Quadros
[U-Boot] [PATCH 1/4] net: enable chip clk for RMII mode. Roger Quadros
[U-Boot] [PATCH 2/4] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection Roger Quadros
[U-Boot] [PATCH 3/4] board: am335x-icev2: add ethernet phy mode detection logic Roger Quadros
[U-Boot] [PATCH 4/4] board: am335x: Always set eth/eth1addr environment variable Roger Quadros
[U-Boot] [PATCH 1/4] net: enable chip clk for RMII mode. Roger Quadros
[U-Boot] [PATCH v2 0/3] am335x-icev2: Ethernet support Roger Quadros
[U-Boot] [PATCH v2 1/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection Roger Quadros
[U-Boot] [PATCH v2 2/3] board: am335x-icev2: add ethernet phy mode detection logic Roger Quadros
[U-Boot] [PATCH v2 3/3] board: am335x: Always set eth/eth1addr environment variable Roger Quadros
[U-Boot] [PATCH 2/4] ARM: dra7xx_evm: Enable support for TI PCF8575 Vignesh R
[U-Boot] [PATCH 1/4] gpio: Add driver for TI PCF8575 I2C GPIO expander Vignesh R
[U-Boot] [PATCH] Makefile: Remove tags file on mrproper Vignesh R
[U-Boot] [PATCH v3 0/5] Add support for TI PCF8575 I2C GPIO expander Vignesh R
[U-Boot] [PATCH v3 1/5] gpio: Add driver for TI PCF8575 I2C GPIO expander Vignesh R
[U-Boot] [PATCH v3 2/5] ARM: dra7xx_evm: Enable support for TI PCF8575 Vignesh R
[U-Boot] [PATCH v3 3/5] ARM: dts: dra7xx: Add u-boot specific property for PCF8575 nodes Vignesh R
[U-Boot] [PATCH v3 4/5] net: cpsw: Add support to drive gpios for ethernet to be functional Vignesh R
[U-Boot] [PATCH v3 5/5] ARM: dts: dra72-evm: Add mode-gpios entry for mac node Vignesh R
[U-Boot] [PATCH v2 0/4] Add support for TI PCF8575 I2C GPIO expander Vignesh R
[U-Boot] [PATCH v2 03/22] spi: Use mode for rx mode flags Vignesh R
[U-Boot] [PATCH v2 07/22] sf: Adopt flash table INFO macro from Linux Vignesh R
[U-Boot] [PATCH 0/2] Enable usage of PCF GPIO line as regulator Vignesh R
[U-Boot] [PATCH 1/2] ARM: dts: dra7xx-evm: add evm_3v3_sd regulator Vignesh R
[U-Boot] [PATCH 2/2] ARM: dra7xx_evm: Enable regulator DM support Vignesh R
[U-Boot] [PATCH] Makefile: Remove tags file on mrproper Vignesh R
[U-Boot] [PATCH RESEND] Makefile: Remove tags file on mrproper Vignesh R
[U-Boot] [PATCH] Makefile: Remove tags file on mrproper Vignesh R
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Vignesh R
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Vignesh R
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Vignesh R
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Vignesh R
[U-Boot] [BUG] divide by 0 in spi flash probe Vignesh R
[U-Boot] [PATCH 1/2] fastboot: implement Kconfig Steve Rae
[U-Boot] [PATCH 2/2] fastboot: move to Kconfig Steve Rae
[U-Boot] [PATCH 1/2] fastboot: more support for reboot-bootloader command Steve Rae
[U-Boot] [PATCH 2/2] bcm: fastboot: implement 'reboot-bootloader' Steve Rae
[U-Boot] [PATCH 1/2] fastboot: more support for reboot-bootloader command Steve Rae
[U-Boot] [PATCH] Kconfig: update FASTBOOT_FLASH_MMC_DEV Steve Rae
[U-Boot] [PATCH v2 4/4] config: rk3399: add support for dwc3 gadget Steve Rae
[U-Boot] Q on expected u-boot behavior on ping response John Rama
[U-Boot] Q on expected u-boot behavior on ping response John Rama
[U-Boot] rockchip: SecureBoot Support? Gregory Ray
[U-Boot] [PATCH v2] watchdog: Fix Watchdog Reset while in U-Boot Prompt Andreas J. Reichel
[U-Boot] [PATCH v2 0/1] Fix U-Boot Prompt on CM-FX6 with enabled watchdog Andreas J. Reichel
[U-Boot] [PATCH v2] common: cli_readline: Improve command line editing Tom Rini
[U-Boot] Please pull u-boot-sunxi master Tom Rini
[U-Boot] Please pull u-boot-rockchip Tom Rini
[U-Boot] [PATCH v2 1/2] cmd: Split 'bootz' and 'booti' out from 'bootm' Tom Rini
[U-Boot] [PATCH v2 2/2] cmd: booti: move CONFIG_CMD_BOOTI to Kconfig Tom Rini
[U-Boot] [PATCH] Makefile: Remove tags file on mrproper Tom Rini
[U-Boot] [PATCH 1/4] Introduce CONFIG_SPL_PANIC_ON_NON_FIT_IMAGE Tom Rini
[U-Boot] [PATCH v2 7/7] cmd/bdinfo: extract print_std_bdinfo Tom Rini
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions Tom Rini
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] [PATCH] MAINTAINERS, git-mailrc: Update the mmc maintainer Tom Rini
[U-Boot] [GIT PULL] Xilinx changes Tom Rini
[U-Boot] [PATCH 1/5] drivers: net: keystone_net: fix line termination with semi-colon Tom Rini
[U-Boot] [PATCH 2/5] drivers: net: keystone_net: add support for multi slave ethernet Tom Rini
[U-Boot] [PATCH 3/5] configs: k2hk_evm: add random eth address support Tom Rini
[U-Boot] [PATCH 4/5] configs: k2e_evm: add random eth address support Tom Rini
[U-Boot] [PATCH 5/5] configs: k2l_evm: add random eth address support Tom Rini
[U-Boot] [PATCH v3 2/5] ARM: dra7xx_evm: Enable support for TI PCF8575 Tom Rini
[U-Boot] [PATCH v3 3/5] ARM: dts: dra7xx: Add u-boot specific property for PCF8575 nodes Tom Rini
[U-Boot] [PATCH] mkimage: Fix argument parsing with signature comment Tom Rini
[U-Boot] [PATCH] configs: Fix mmc rescan misuses Tom Rini
[U-Boot] [PATCH v2] mkimage: Fix argument parsing with signature comment Tom Rini
[U-Boot] A command to discard saved environments? Tom Rini
[U-Boot] Please pull u-boot-fsl-qoriq master Tom Rini
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Tom Rini
[U-Boot] [PATCH 2/4] ARM: AM57xx: Disable non-FIT based image loading for HS devices Tom Rini
[U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Tom Rini
[U-Boot] [Resend] Please pull u-boot-mpc86xx master Tom Rini
[U-Boot] [PATCH] arc: Rename AXS101 board to more generic AXS10x Tom Rini
[U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Tom Rini
[U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Tom Rini
[U-Boot] [PATCH 0/7] net/ethoc improvements Tom Rini
[U-Boot] [PATCH] cmd: net: flush cache cacheline aligned Tom Rini
[U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Tom Rini
[U-Boot] [PATCH] zynq_sdhci.c: Fix warning in arasan_sdhci_probe Tom Rini
[U-Boot] [PATCH] arm: omap5: am57/dra7: Fix SRAM_SCRATCH_SPACE_ADDR and SRAM_ROM_VECT_BASE Tom Rini
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions Tom Rini
[U-Boot] [PATCH] Please pull u-boot-mmc Tom Rini
[U-Boot] Pull request, u-boot-tegra/master Tom Rini
[U-Boot] [PATCH] zynq_sdhci.c: Fix warning in arasan_sdhci_probe Tom Rini
[U-Boot] [U-Boot, 1/1] ext4: Refuse to mount filesystems with 64bit feature set Tom Rini
[U-Boot] [U-Boot, v2, 1/8] tools: moveconfig: do not cleanup headers in include/generated Tom Rini
[U-Boot] [U-Boot, v2, 2/8] tools: moveconfig: do not check clean tree and compilers for -H option Tom Rini
[U-Boot] [U-Boot, v2, 3/8] tools: moveconfig: trim garbage lines after header cleanups Tom Rini
[U-Boot] [U-Boot, v2, 4/8] tools: moveconfig: show result of header cleaning in unified diff Tom Rini
[U-Boot] [U-Boot, v2, 5/8] tools: moveconfig: show diffs of cleaned headers in color Tom Rini
[U-Boot] [U-Boot, v2, 6/8] tools: moveconfig: fix cleanup of defines across multiple lines Tom Rini
[U-Boot] [U-Boot, v2, 7/8] tools: moveconfig: make getting all defconfigs into helper function Tom Rini
[U-Boot] [U-Boot, v2, 8/8] tools: moveconfig: support CONFIG_SYS_EXTRA_OPTIONS cleaning Tom Rini
[U-Boot] [U-Boot, v2] treewide: move CONFIG_PHYS_64BIT to Kconfig Tom Rini
[U-Boot] [U-Boot, v2, 1/7] cmd/bdinfo: extract print_bi_boot_params Tom Rini
[U-Boot] [U-Boot,v2,2/7] cmd/bdinfo: extract print_bi_mem Tom Rini
[U-Boot] [U-Boot,v2,3/7] cmd/bdinfo: extract print_bi_dram Tom Rini
[U-Boot] [U-Boot,v2,4/7] cmd/bdinfo: extract print_bi_flash Tom Rini
[U-Boot] [U-Boot,v2,5/7] cmd/bdinfo: extract print_eth_ip_addr Tom Rini
[U-Boot] [U-Boot,v2,6/7] cmd/bdinfo: extract print_baudrate Tom Rini
[U-Boot] [U-Boot,v2,7/7] cmd/bdinfo: extract print_std_bdinfo Tom Rini
[U-Boot] [U-Boot, 1/3] omap3: Move to select SUPPORT_SPL for all Tom Rini
[U-Boot] [U-Boot, 2/3] omap3, omap4: Enable USE_TINY_PRINTF for all Tom Rini
[U-Boot] [U-Boot,3/3] omap3: Drop omap3_evm_quick_* targets Tom Rini
[U-Boot] [U-Boot, v2] cmd: gpt: fix the wrong size parse for the last partition Tom Rini
[U-Boot] [U-Boot, v2] armv8: mmu: Detect page table overflow in emergency pt creation Tom Rini
[U-Boot] [U-Boot, 1/9] Makefile: Allow 'make tests' to run tests Tom Rini
[U-Boot] [U-Boot,2/9] test: Fix typos and tidy up Tom Rini
[U-Boot] [U-Boot, 3/9] test: Check exit status in run_and_log_expect_exception() Tom Rini
[U-Boot] [U-Boot,4/9] test: Fix typos in comments Tom Rini
[U-Boot] [U-Boot,5/9] test: Drop the cmd() function Tom Rini
[U-Boot] [U-Boot, 6/9] test: Rename sha to sha_algo and pass it around Tom Rini
[U-Boot] [U-Boot, 7/9] test: vboot: Put each test variant in its own section Tom Rini
[U-Boot] [U-Boot,8/9] test: Add a function to restart U-Boot Tom Rini
[U-Boot] [U-Boot, 9/9] test: Adjust run_command_list() to return a list of strings Tom Rini
[U-Boot] [U-Boot, v2] mkimage: Fix argument parsing with signature comment Tom Rini
[U-Boot] configs: Fix mmc rescan misuses Tom Rini
[U-Boot] Please pull ARC changes Tom Rini
[U-Boot] [PATCH] tiny-printf: Adjust to avoid using data section Tom Rini
[U-Boot] Please pull u-boot-rockchip Tom Rini
[U-Boot] [PATCH 1/2] bdinfo: Don't print out empty DRAM banks Tom Rini
[U-Boot] [PATCH v3 1/6] xtensa: add support for the xtensa processor architecture [1/2] Tom Rini
[U-Boot] [PATCH v3 2/6] xtensa: add support for the xtensa processor architecture [2/2] Tom Rini
[U-Boot] [PATCH v3 3/6] xtensa: add core information for the dc232b processor Tom Rini
[U-Boot] [PATCH v3 4/6] xtensa: add core information for the dc233c processor Tom Rini
[U-Boot] [PATCH v3 5/6] xtensa: add core information for the de212 processor Tom Rini
[U-Boot] [PATCH v3 6/6] xtensa: add support for the 'xtfpga' evaluation board Tom Rini
[U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support Tom Rini
[U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support Tom Rini
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] [PULL] u-boot-socfpga/master Tom Rini
[U-Boot] Pull request: u-boot-spi/master Tom Rini
[U-Boot] Please pull u-boot-ppc4xx/master Tom Rini
[U-Boot] [U-Boot, RFC] i2c: i2c-uclass-compat: avoid any BSS usage Tom Rini
[U-Boot] [U-Boot, v2] spl_nor.c: Support devicetree sizes different from 16k Tom Rini
[U-Boot] [U-Boot, v3, 1/5] gpio: Add driver for TI PCF8575 I2C GPIO expander Tom Rini
[U-Boot] [U-Boot, v3, 2/5] ARM: dra7xx_evm: Enable support for TI PCF8575 Tom Rini
[U-Boot] [U-Boot, v3, 3/5] ARM: dts: dra7xx: Add u-boot specific property for PCF8575 nodes Tom Rini
[U-Boot] [U-Boot, v3, 4/5] net: cpsw: Add support to drive gpios for ethernet to be functional Tom Rini
[U-Boot] [U-Boot, v3, 5/5] ARM: dts: dra72-evm: Add mode-gpios entry for mac node Tom Rini
[U-Boot] [U-Boot, 1/5] drivers: net: keystone_net: fix line termination with semi-colon Tom Rini
[U-Boot] [U-Boot, 2/5] drivers: net: keystone_net: add support for multi slave ethernet Tom Rini
[U-Boot] [U-Boot, 3/5] configs: k2hk_evm: add random eth address support Tom Rini
[U-Boot] [U-Boot, 4/5] configs: k2e_evm: add random eth address support Tom Rini
[U-Boot] [U-Boot, 5/5] configs: k2l_evm: add random eth address support Tom Rini
[U-Boot] tiny-printf: Adjust to avoid using data section Tom Rini
[U-Boot] efi_loader: disk: Fix CONFIG_BLK breakage Tom Rini
[U-Boot] efi_loader: disk: Sanitize exposed devices Tom Rini
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Tom Rini
[U-Boot] ext4 write support and big-endian machines Tom Rini
[U-Boot] [PATCH 1/2] ARM: dts: dra7xx-evm: add evm_3v3_sd regulator Tom Rini
[U-Boot] [PATCH 2/2] ARM: dra7xx_evm: Enable regulator DM support Tom Rini
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Tom Rini
[U-Boot] [PATCH 1/4] drivers: mmc: omap_hsmmc: fix build breakage Tom Rini
[U-Boot] [PATCH 2/4] ARM: dts: K2G: Add support for MMC controller Tom Rini
[U-Boot] [PATCH 3/4] ARM: dts: k2g-evm: enable mmc/sd suppport Tom Rini
[U-Boot] [PATCH 4/4] defconfig: k2g_evm_defconfig: Enable mmc driver model Tom Rini
[U-Boot] [PATCH v4 2/6] xtensa: add support for the xtensa processor architecture [2/2] Tom Rini
[U-Boot] [PATCH] configs: dra7xx_evm: enable eth driver model Tom Rini
[U-Boot] Resend: Pull request: u-boot-sh/rmobile Tom Rini
[U-Boot] [PATCH] defconfig: am43xx_evm: enable eth driver model Tom Rini
[U-Boot] [PATCH v3] drivers: net: cpsw: always flush cache of size aligned to PKTALIGN Tom Rini
[U-Boot] [PATCH 0/5] ARM: Enable CMD_TIME on all TI platforms Tom Rini
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Tom Rini
[U-Boot] [PULL] u-boot-usb/master Tom Rini
[U-Boot] pull request: u-boot-uniphier/master Tom Rini
[U-Boot] [PATCH] Please pull u-boot-mmc Tom Rini
[U-Boot] [PATCH v2 1/2] cmd: Split 'bootz' and 'booti' out from 'bootm' Tom Rini
[U-Boot] [PATCH v2 1/2] cmd: Split 'bootz' and 'booti' out from 'bootm' Tom Rini
[U-Boot] [PATCH v3 1/3] cmd: Split 'bootz' and 'booti' out from 'bootm' Tom Rini
[U-Boot] [PATCH v3 2/3] cmd: booti: move CONFIG_CMD_BOOTI to Kconfig Tom Rini
[U-Boot] [PATCH v3 3/3] Kconfig: DISTRO_DEFAULTS: Only enable CMD_BOOTZ for ARM Tom Rini
[U-Boot] [PATCH] Please pull u-boot-mmc Tom Rini
[U-Boot] common: image: Add support for post-processing of images Tom Rini
[U-Boot] ARM: non-sec: flush code cacheline aligned Tom Rini
[U-Boot] [U-Boot,v2] drivers/sysreset: group sysreset drivers Tom Rini
[U-Boot] [U-Boot, 1/2] ARM: dts: dra7xx-evm: add evm_3v3_sd regulator Tom Rini
[U-Boot] [U-Boot, 2/2] ARM: dra7xx_evm: Enable regulator DM support Tom Rini
[U-Boot] configs: dra7xx_evm: enable eth driver model Tom Rini
[U-Boot] [U-Boot, v3] drivers: net: cpsw: always flush cache of size aligned to PKTALIGN Tom Rini
[U-Boot] defconfig: am43xx_evm: enable eth driver model Tom Rini
[U-Boot] [U-Boot, v2] kconfig: use bool instead of boolean for type definition attributes Tom Rini
[U-Boot] Please pull u-boot-dm Tom Rini
[U-Boot] [PATCH 2/3] net: davinci_emac: Round up top buffer boundaries for dcache ops Tom Rini
[U-Boot] [PATCH 1/3] net: davinci_emac: Remove useless dcache ops on descriptors Tom Rini
[U-Boot] [PATCH v4] arm: cache: always flush cache line size for page table Tom Rini
[U-Boot] [U-Boot, RFC] vexpress: Check TC2 firmware support before defaulting to nonsec booting Tom Rini
[U-Boot] cmd: net: flush cache cacheline aligned Tom Rini
[U-Boot] [PATCH 2/3] net: davinci_emac: Round up top buffer boundaries for dcache ops Tom Rini
[U-Boot] [PATCH] common: env_nand: Ensure that we have nand_info[0] prior to use Tom Rini
[U-Boot] [PATCH v2] common: env_nand: Ensure that we have nand_info[0] prior to use Tom Rini
[U-Boot] [PATCH v2] common: env_nand: Ensure that we have nand_info[0] prior to use Tom Rini
[U-Boot] [PATCH v3] common: env_nand: Ensure that we have nand_info[0] prior to use Tom Rini
[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Tom Rini
[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Tom Rini
[U-Boot] test.py and tftp crc32 test? Tom Rini
[U-Boot] test.py and tftp crc32 test? Tom Rini
[U-Boot] [PATCH v2 2/2] net: davinci_emac: Invalidate only the received portion of a buffer Tom Rini
[U-Boot] [PATCH v2 1/2] net: davinci_emac: Round up top tx buffer boundaries for dcache ops Tom Rini
[U-Boot] Pull request, u-boot-tegra/master Tom Rini
[U-Boot] Pull request: u-boot-net.git master Tom Rini
[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Tom Rini
[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master Tom Rini
[U-Boot] [U-Boot, RFC] vexpress: Check TC2 firmware support before defaulting to nonsec booting Tom Rini
[U-Boot] [U-Boot, v4, 1/6] xtensa: add support for the xtensa processor architecture [1/2] Tom Rini
[U-Boot] [U-Boot, v4, 2/6] xtensa: add support for the xtensa processor architecture [2/2] Tom Rini
[U-Boot] [U-Boot, v4, 3/6] xtensa: add core information for the dc232b processor Tom Rini
[U-Boot] [U-Boot, v4, 4/6] xtensa: add core information for the dc233c processor Tom Rini
[U-Boot] [U-Boot, v4, 5/6] xtensa: add core information for the de212 processor Tom Rini
[U-Boot] [U-Boot, v4, 6/6] xtensa: add support for the 'xtfpga' evaluation board Tom Rini
[U-Boot] [U-Boot, RFC:, v2] tools/env: ensure environment starts at erase block boundary Tom Rini
[U-Boot] [U-Boot, v3] common: env_nand: Ensure that we have nand_info[0] prior to use Tom Rini
[U-Boot] [U-Boot, v4, 01/13] cmd: fdt: Narrow the check for fdt addr Tom Rini
[U-Boot] test.py and tftp crc32 test? Tom Rini
[U-Boot] [PATCH] Please pull u-boot-mmc Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] [U-Boot, v4, 01/13] cmd: fdt: Narrow the check for fdt addr Tom Rini
[U-Boot] [PATCH] Makefile: Remove tags file on mrproper Tom Rini
[U-Boot] [GIT] Pull request: u-boot-dfu Tom Rini
[U-Boot] [PATCH] test/py: match prompt only at line boundaries Tom Rini
[U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3 Tom Rini
[U-Boot] [GIT] Pull request: u-boot-dfu Tom Rini
[U-Boot] [GIT] Pull request: u-boot-dfu Tom Rini
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Tom Rini
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Tom Rini
[U-Boot] [PATCH] ext4: fix possible crash on directory traversal, ignore deleted entries Tom Rini
[U-Boot] [PATCH 1/2] ARM: OMAP5+: vcores: Drop unnecessary #ifndefs Tom Rini
[U-Boot] [PATCH 2/2] ARM: OMAP4+: vcores: Remove duplicated code Tom Rini
[U-Boot] [PATCH 1/2] tools/env: return with error if redundant environments have unequal size Tom Rini
[U-Boot] [PATCH 2/2] tools/env: soften warning about erase block alignment Tom Rini
[U-Boot] [UBOOT PATCH 1/4] armv7: psci: make v7_flush_dcache_all public for all psci code Tom Rini
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Tom Rini
[U-Boot] [PATCH] CPCI4052: Remove CONFIG_AUTO_COMPLETE and custom baud rate table Tom Rini
[U-Boot] OMAP3 SPL Overflow Tom Rini
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Tom Rini
[U-Boot] [v3] Pull request: u-boot-sh/rmobile Tom Rini
[U-Boot] [U-Boot, v4, 01/13] cmd: fdt: Narrow the check for fdt addr Tom Rini
[U-Boot] [U-Boot, v4, 02/13] scripts: Makefile.lib: Sanitize DTB names Tom Rini
[U-Boot] [U-Boot, v4, 03/13] vsprintf: Include stdarg for va_list Tom Rini
[U-Boot] [U-Boot,v4,04/13] libfdt: Add new headers and defines Tom Rini
[U-Boot] [U-Boot, v4, 05/13] libfdt: Add iterator over properties Tom Rini
[U-Boot] [U-Boot, v4, 06/13] libfdt: Add max phandle retrieval function Tom Rini
[U-Boot] [U-Boot,v4,07/13] libfdt: Fix separator spelling Tom Rini
[U-Boot] [U-Boot,v4,08/13] libfdt: Add fdt_path_offset_namelen Tom Rini
[U-Boot] [U-Boot,v4,09/13] libfdt: Add fdt_getprop_namelen_w Tom Rini
[U-Boot] [U-Boot, v4, 10/13] libfdt: Add fdt_setprop_inplace_namelen_partial Tom Rini
[U-Boot] [U-Boot, v4, 11/13] libfdt: Add overlay application function Tom Rini
[U-Boot] [U-Boot, v4, 12/13] cmd: fdt: add fdt overlay application subcommand Tom Rini
[U-Boot] [U-Boot,v4,13/13] tests: Introduce DT overlay tests Tom Rini
[U-Boot] [U-Boot, v3, 1/3] cmd: Split 'bootz' and 'booti' out from 'bootm' Tom Rini
[U-Boot] [U-Boot, v3, 2/3] cmd: booti: move CONFIG_CMD_BOOTI to Kconfig Tom Rini
[U-Boot] [U-Boot, v3, 3/3] Kconfig: DISTRO_DEFAULTS: Only enable CMD_BOOTZ for ARM Tom Rini
[U-Boot] [U-Boot, v2] cmd: efi_loader: Return CMD_RET_USAGE in case of not enough arguments Tom Rini
[U-Boot] [U-Boot,1/2] fastboot: implement Kconfig Tom Rini
[U-Boot] [U-Boot,2/2] fastboot: move to Kconfig Tom Rini
[U-Boot] [U-Boot, v3] common: cli_readline: Improve command line editing Tom Rini
[U-Boot] test/py: match prompt only at line boundaries Tom Rini
[U-Boot] [U-Boot, 1/2] ARM: OMAP5+: vcores: Drop unnecessary #ifndefs Tom Rini
[U-Boot] [U-Boot, 2/2] ARM: OMAP4+: vcores: Remove duplicated code Tom Rini
[U-Boot] [U-Boot, 1/2] tools/env: return with error if redundant environments have unequal size Tom Rini
[U-Boot] [U-Boot, 2/2] tools/env: soften warning about erase block alignment Tom Rini
[U-Boot] [U-Boot, RESEND] Makefile: Remove tags file on mrproper Tom Rini
[U-Boot] efi_loader: Fix relocations above 64kb image size Tom Rini
[U-Boot] pinctrl: fix typos in comment blocks of pinconfig_post_bind() Tom Rini
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Tom Rini
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Tom Rini
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Tom Rini
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Tom Rini
[U-Boot] OMAP3 SPL Overflow Tom Rini
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Tom Rini
[U-Boot] [PATCH v2 2/2] arch/arm/Kconfig: Whitespace correction Tom Rini
[U-Boot] [PATCH 02/13] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Tom Rini
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Tom Rini
[U-Boot] [PATCH 3/4] tools: moveconfig: warn loudly if moved option has no entry in Kconfig Tom Rini
[U-Boot] [PATCH 4/4] tools: moveconfig: add --spl option to move options for SPL build Tom Rini
[U-Boot] [PATCH] regulator: fixed: obey startup delay Tom Rini
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Tom Rini
[U-Boot] [PATCH] efi_loader: disk: Fix CONFIG_BLK breakage Tom Rini
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Tom Rini
[U-Boot] [PATCH] fs-test.sh: Correct check_md5() test with newlines Tom Rini
[U-Boot] [PATCH] fs-test.sh: Correct check_md5() test with newlines Tom Rini
[U-Boot] [ANN] U-Boot v2016.09-rc2 released Tom Rini
[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P. Tom Rini
[U-Boot] [PATCH 1/2] configs: ti_omap4_common: Include TWL6030 power and I2C support in SPL Tom Rini
[U-Boot] [PATCH 2/2] panda: Initialize MMC power from TWL6030 in SPL Tom Rini
[U-Boot] Pull request: u-boot-net.git master Tom Rini
[U-Boot] [ANN] U-Boot v2016.09-rc2 released Tom Rini
[U-Boot] [PATCH 19/42] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Tom Rini
[U-Boot] [PATCH 06/42] Use separate options for TPL support Tom Rini
[U-Boot] [RFC v1 PATCH] ARM7: Kconfig: cache: fix cacheline size based on arm type Tom Rini
[U-Boot] [PATCH 19/42] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Tom Rini
[U-Boot] OMAP3 SPL Overflow Tom Rini
[U-Boot] [PATCH 1/3] ARM: AM43xx: Enable post-processing of FIT artifacts loaded by U-Boot Tom Rini
[U-Boot] [PATCH 2/3] ARM: DRA7xx: Enable post-processing of FIT artifacts loaded by U-Boot Tom Rini
[U-Boot] [PATCH 3/3] ARM: AM57xx: Enable post-processing of FIT artifacts loaded by U-Boot Tom Rini
[U-Boot] [PATCH] board/BuR/common: increase NET_RETRY_COUNT to 10 Tom Rini
[U-Boot] Pull request, u-boot-tegra/master Tom Rini
[U-Boot] Please pull u-boot-marvell/master Tom Rini
[U-Boot] Please pull from u-boot-i2c Tom Rini
[U-Boot] [PATCH] TI: Rework SRAM definitions and maximums Tom Rini
[U-Boot] [RFC PATCH v2 11/11] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE as Kconfig option Tom Rini
[U-Boot] [RFC PATCH v2 09/11] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Tom Rini
[U-Boot] [PATCH v2 01/11] Kconfig: Separate AM33XX SOC config from target board config Tom Rini
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Tom Rini
[U-Boot] [PATCH] common: show "Boot media" menu only for some TI and Freescale SoCs Tom Rini
[U-Boot] [PATCH v3 01/11] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Tom Rini
[U-Boot] [PATCH v2 1/3] configs: ti_omap4_common: Include TWL6030 power and I2C support in SPL Tom Rini
[U-Boot] [PATCH v2 2/3] panda: Initialize MMC power from TWL6030 in SPL Tom Rini
[U-Boot] [PATCH v2 3/3] spl: Rework image header parse to allow abort on raw image and os boot Tom Rini
[U-Boot] [PATCH] omap3logic: Fix PBIAS Bug Tom Rini
[U-Boot] [PATCH v3 02/11] Kconfig: Separate AM33XX SOC config from target board config Tom Rini
[U-Boot] [PATCH v3 03/11] am33xx: config.mk: Add support for additional secure boot image types Tom Rini
[U-Boot] [PATCH v3 04/11] doc: Update info on using AM33xx secure devices from TI Tom Rini
[U-Boot] [PATCH v3 06/11] board: am33xx-hs: Allow post-processing of FIT image on AM33xx Tom Rini
[U-Boot] [PATCH v3 07/11] ti: omap-common: Allow AM33xx devices to be built securely Tom Rini
[U-Boot] [PATCH v3 09/11] config: Remove usage of CONFIG_STORAGE_EMMC Tom Rini
[U-Boot] [PATCH v3 10/11] ti_armv7_common: Disable Falcon Mode on HS devices Tom Rini
[U-Boot] [PATCH 2/2] configs: ti: armv7_common: Enable DISPLAY_{CPU/BOARD}INFO Tom Rini
[U-Boot] Please pull u-boot-sunxi master Tom Rini
[U-Boot] [U-Boot, v5, 1/2] arm: cache: add support for LPAE for region D$ behavior Tom Rini
[U-Boot] [U-Boot, v5, 2/2] arm: cache: always flush cache line size for page table Tom Rini
[U-Boot] [U-Boot, v2] tools: moveconfig: add Xtensa GCC prefix to CROSS_COMPILE list Tom Rini
[U-Boot] treewide: fix "followings" to "following" Tom Rini
[U-Boot] [U-Boot, v2, 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Tom Rini
[U-Boot] [U-Boot, v2, 2/2] arch/arm/Kconfig: Whitespace correction Tom Rini
[U-Boot] [U-Boot, PATCHv3] nand: Fix set_dev checks for no device Tom Rini
[U-Boot] [PATCH v2 1/3] driver: net: cpsw: add support for RGMII id mode support and RMII clock source selection Tom Rini
[U-Boot] [PATCH v2 2/3] board: am335x-icev2: add ethernet phy mode detection logic Tom Rini
[U-Boot] [PATCH v2 3/3] board: am335x: Always set eth/eth1addr environment variable Tom Rini
[U-Boot] [UBoot] [PATCH] configs: am4xhs: Modify SPL load address to fix UART boot issue Tom Rini
[U-Boot] Please pull u-boot-rockchip Tom Rini
[U-Boot] pull request: u-boot-uniphier/master Tom Rini
[U-Boot] [PATCH] tests: test_dfu.py: Add example udev rule for host_usb_dev_node Tom Rini
[U-Boot] [PATCH v3 01/11] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Tom Rini
[U-Boot] [PATCH] nand: Fix nand info for no device Tom Rini
[U-Boot] [PATCH] pxe: Fix pxe boot with FIT image Tom Rini
[U-Boot] Please pull u-boot-x86 Tom Rini
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Tom Rini
[U-Boot] [PATCH v2 1/3] ARM: AM437X: Add Silicon ID support Tom Rini
[U-Boot] [PATCH v2 2/3] ARM: TI: Enable DISPLAY_CPUINFO on all SoCs Tom Rini
[U-Boot] [PATCH v2 3/3] ARM: TI: Enable DISPLAY_BOARDINFO on all boards Tom Rini
[U-Boot] [PATCH 1/2] board: ks2: Enable ECC using detected DDR size Tom Rini
[U-Boot] [PATCH 2/2] board: k2g: Enable ECC byte lane Tom Rini
[U-Boot] [PATCH v2 1/3] Kconfig: Added new kconfig entry for IDENT_STRING Tom Rini
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Tom Rini
[U-Boot] [PATCH v2 1/3] Kconfig: Added new kconfig entry for IDENT_STRING Tom Rini
[U-Boot] [PATCH] ARM: dts: dra72-evm: fix broken ethernet Tom Rini
[U-Boot] [PATCH 19/42] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Maxime Ripard
[U-Boot] [PATCH 0/2] rockchip: Initial RK3368 and GeekBox support Peter Robinson
[U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Stefan Roese
[U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Stefan Roese
[U-Boot] [PATCH] tiny-printf: Adjust to avoid using data section Stefan Roese
[U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Stefan Roese
[U-Boot] [PATCH 2/2] x86: i2c: Avoid using BSS before it is available Stefan Roese
[U-Boot] [PATCH v2] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Stefan Roese
[U-Boot] Please pull u-boot-ppc4xx/master Stefan Roese
[U-Boot] [PATCH] marvell: add support for Synology DS109 board Stefan Roese
[U-Boot] [PATCH] tools: kwboot: patch destaddr only for SoCs with header version 1 Stefan Roese
[U-Boot] [PATCH 1/2 v3] x86: Add DFI BT700 BayTrail board support Stefan Roese
[U-Boot] [PATCH v2] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Stefan Roese
[U-Boot] [PATCH 1/2 v4] x86: Add DFI BT700 BayTrail board support Stefan Roese
[U-Boot] [PATCH 2/2 v2] x86: Add theadorable-x86-dfi-bt700 board support Stefan Roese
[U-Boot] [PATCH] x86: conga-qeval20-qa3: Add missing MAINTERNERS entry Stefan Roese
[U-Boot] [PATCH v1 2/2] arm: mvebu: Define NAND interface pins for A-38x Stefan Roese
[U-Boot] [PATCH v1 2/2] arm: mvebu: Define NAND interface pins for A-38x Stefan Roese
[U-Boot] [PATCH] sf: fix sf probe Stefan Roese
[U-Boot] [PATCH] net: mvneta: Round up top tx buffer boundaries for dcache ops Stefan Roese
[U-Boot] [PATCH] i2c: mvtwsi: Fix order of address bytes (high to low) Stefan Roese
[U-Boot] [PATCH] arm: mvebu: theadorable: Configure board for PCIe 2.0 capability Stefan Roese
[U-Boot] [PATCH] common/xyzModem.c: Fix delay timeout calculation Stefan Roese
[U-Boot] [PATCH v1 1/2] arm: mvebu: Add support for NAND interface on A-38x Stefan Roese
[U-Boot] [PATCH v1] spl: Remove unused CONFIG_SPL_SPI_* definitions Stefan Roese
[U-Boot] [PATCH v1] arm: mvebu: a38x: update serdes error handling Stefan Roese
[U-Boot] [PATCH v1] arm: mvebu: a38x: typo fix cpabilities -> capbilities Stefan Roese
[U-Boot] [PATCH v2] tools: kwboot: patch destaddr only for SoCs with header version 1 Stefan Roese
[U-Boot] Please pull u-boot-marvell/master Stefan Roese
[U-Boot] [PATCH] common/xyzModem.c: Fix delay timeout calculation Stefan Roese
[U-Boot] [BUG] divide by 0 in spi flash probe Stefan Roese
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Stefan Roese
[U-Boot] [PATCH v2 3/3] ARM: TI: Enable DISPLAY_BOARDINFO on all boards Stefan Roese
[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size" Otavio Salvador
[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size" Otavio Salvador
[U-Boot] [PATCH] warp7: Adjust CONFIG_MMCROOT for booting a mainline kernel Otavio Salvador
[U-Boot] [PATCH] warp7: Adjust CONFIG_MMCROOT for booting a mainline kernel Otavio Salvador
[U-Boot] [PATCH 1/3] warp7: Add a secure mode target Otavio Salvador
[U-Boot] [PATCH] warp7: Adjust CONFIG_MMCROOT for booting a mainline kernel Otavio Salvador
[U-Boot] [PATCH 2/3] mx6ulinitclockearlier Otavio Salvador
[U-Boot] ext4write fails when writing into directory Thomas Schaefer
[U-Boot] [PATCH 5/5] arm: Show cache warnings in U-Boot proper only Hannes Schmelzer
[U-Boot] [PATCH] mtd: nand: mxs: fix cache alignment for cache lines >32 Hannes Schmelzer
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Hannes Schmelzer
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Hannes Schmelzer
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Hannes Schmelzer
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Hannes Schmelzer
[U-Boot] [PATCH] board/BuR/common: increase NET_RETRY_COUNT to 10 Hannes Schmelzer
[U-Boot] [PATCH v1] cmd/sf: probe flash with speed of last known flash or speed from devicetree Hannes Schmelzer
[U-Boot] [PATCH] sf: fix sf probe Hannes Schmelzer
[U-Boot] [PATCH v4 01/10] Kconfig: Separate AM33XX SOC config from target board config Hannes Schmelzer
[U-Boot] [PATCH v4 01/10] Kconfig: Separate AM33XX SOC config from target board config Hannes Schmelzer
[U-Boot] [PATCH 3/7] dt-bindings: add Tegra186 BPMP I2C binding Heiko Schocher
[U-Boot] [PATCH 4/7] i2c: add Tegra186 BPMP driver Heiko Schocher
[U-Boot] [PATCH] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Heiko Schocher
[U-Boot] [PATCH V2 3/3] i2c: tegra: add standardized clk/reset API support Heiko Schocher
[U-Boot] [PATCH v4] arm: cache: always flush cache line size for page table Heiko Schocher
[U-Boot] [PATCH 2/2] x86: i2c: Avoid using BSS before it is available Heiko Schocher
[U-Boot] Older u-boot mangles UBI from ubinize 1.5.2 Heiko Schocher
[U-Boot] [PATCH] getting ubifs to run Heiko Schocher
[U-Boot] [PATCH v2] i2c: intel_i2c: SMBus driver PCI addition (e.g. BayTrail) Heiko Schocher
[U-Boot] test.py and tftp crc32 test? Heiko Schocher
[U-Boot] test.py and tftp crc32 test? Heiko Schocher
[U-Boot] [PATCH 0/6] at91: at91sam9g15 improvements Heiko Schocher
[U-Boot] [PATCH 1/6] arm: at91: mpddrc: add missing MPDDRC_MD defines Heiko Schocher
[U-Boot] [PATCH 2/6] ARM: at91: clock: correct PRES offset for at91sam9x5 Heiko Schocher
[U-Boot] [PATCH 3/6] arm, at91: add icache support Heiko Schocher
[U-Boot] [PATCH 4/6] arm, at91: add some missing fields in PIO struct Heiko Schocher
[U-Boot] [PATCH 5/6] at91: add function to set IO drive Heiko Schocher
[U-Boot] [PATCH 6/6] [RFC] at91: SPL clock fix for AT91SAM9G15 based boards. Heiko Schocher
[U-Boot] [GIT] Pull request: u-boot-dfu Heiko Schocher
[U-Boot] [PATCH] test/py: match prompt only at line boundaries Heiko Schocher
[U-Boot] [PATCH 01/13] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Heiko Schocher
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Heiko Schocher
[U-Boot] [ANN] U-Boot v2016.09-rc2 released Heiko Schocher
[U-Boot] [PATCH 00/42] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Heiko Schocher
[U-Boot] [PATCH 00/42] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Heiko Schocher
[U-Boot] Please pull from u-boot-i2c Heiko Schocher
[U-Boot] [PATCH] net, macb: fix misaligned cache operation warning Heiko Schocher
[U-Boot] [PATCH] net, cmd: fix misaligned cache operation warning Heiko Schocher
[U-Boot] [PATCH v2 00/44] Kconfig: Move CONFIG_SPL_..._SUPPORT to Kconfig Heiko Schocher
[U-Boot] [PATCH] cmd: dfu: Add error handling for board_usb_init Heiko Schocher
[U-Boot] [PATCH v2] cmd: dfu: Add error handling for board_usb_init Heiko Schocher
[U-Boot] [PATCH] eth: asix88179: Reset device during probe with DM_ETH enabled Nikolaus Schulz
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Chin Liang See
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Chin Liang See
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Chin Liang See
[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Chin Liang See
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Chin Liang See
[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Chin Liang See
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Chin Liang See
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Chin Liang See
[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Chin Liang See
[U-Boot] [PATCH] spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max value Chin Liang See
[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Chin Liang See
[U-Boot] [PATCH] spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max value Chin Liang See
[U-Boot] [PATCH] spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max value Chin Liang See
[U-Boot] [PATCH v2] spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max value Chin Liang See
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Chin Liang See
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Chin Liang See
[U-Boot] [PATCH 00/11] Add support for Stratix 10 SoC Chin Liang See
[U-Boot] [PATCH 01/11] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Chin Liang See
[U-Boot] [PATCH 02/11] arm: socfpga: rstmgr: Add Reset Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH 03/11] arm: socfpga: rstmgr: Segregate the Reset Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH 04/11] arm: socfpga: clkmgr: Segregate the Clock Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH 05/11] arm: socfpga: fpgamgr: Segregate the FPGA Manager for Stratix 10 Chin Liang See
[U-Boot] [PATCH 06/11] arm: socfpga: misc: Segregate the misc.c for Stratix 10 Chin Liang See
[U-Boot] [PATCH 07/11] arm: socfpga: sysmgr: Fix casting warning when enabling ARM64 Chin Liang See
[U-Boot] [PATCH 08/11] arm: socfpga: mmu: Add memory map layout for Stratix 10 SoC Chin Liang See
[U-Boot] [PATCH 09/11] arm: socfpga: stratix10: Add board folder for Stratix 10 socdk Chin Liang See
[U-Boot] [PATCH 10/11] arm: dts: socfpga: Add dts for Stratix 10 socdk Chin Liang See
[U-Boot] [PATCH 11/11] arm: socfpga: Add support for Stratix 10 SoC dev kit Chin Liang See
[U-Boot] [PATCH] ARM: am335x: select DM_GPIO Enric Balletbo Serra
[U-Boot] pine64 and "sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80" Siarhei Siamashka
[U-Boot] [PATCH v2 02/13] dm: Convert users from dm_scan_fdt_node() to dm_scan_fdt_dev() Michal Simek
[U-Boot] [PATCH v2] libfdt: Introduce new ARCH_FIXUP_FDT option Michal Simek
[U-Boot] [PATCH v3] libfdt: Introduce new ARCH_FIXUP_FDT option Michal Simek
[U-Boot] [PATCH] ARM64: zynqmp: Do not enable DM_MMC by default Michal Simek
[U-Boot] [PATCH 1/3] net: emaclite: Use ioremap_nocache Michal Simek
[U-Boot] [PATCH v2 2/3] zynqmp: Move config IDENT_STRING to defconfig Michal Simek
[U-Boot] [PATCH v2 3/3] zynqmp: Remove unnnecessary board config file for dc4 Michal Simek
[U-Boot] SCSI is missing DM support? Michal Simek
[U-Boot] [PATCH v4 00/11] MIPS Boston Development Board Support Michal Simek
[U-Boot] [PATCH v4 00/11] MIPS Boston Development Board Support Michal Simek
[U-Boot] [GIT PULL] Xilinx changes Michal Simek
[U-Boot] [PATCH 5/5] arm: Show cache warnings in U-Boot proper only Michal Simek
[U-Boot] [PATCH v4 01/11] serial: ns16550: Support clocks via phandle Michal Simek
[U-Boot] [PATCH v4 03/11] pci: xilinx: Add a driver for Xilinx AXI to PCIe bridge Michal Simek
[U-Boot] [PATCH v4 00/11] MIPS Boston Development Board Support Michal Simek
[U-Boot] [PATCH v4 01/11] serial: ns16550: Support clocks via phandle Michal Simek
[U-Boot] [PATCH] image-fit: fix fit_image_load() OS check Michal Simek
[U-Boot] [PATCH] ARM64: zynqmp: Wire up both USBs available on ZynqMP Michal Simek
[U-Boot] [PATCH 4/5] arm: Provide common PSCI based reset handler Michal Simek
[U-Boot] [PATCH 0/5] armv8: Add generic PSCI client support Michal Simek
[U-Boot] ZynqMP breakage Michal Simek
[U-Boot] [PATCH v2 1/3] Kconfig: Added new kconfig entry for IDENT_STRING Michal Simek
[U-Boot] [PATCH v2 1/3] Kconfig: Added new kconfig entry for IDENT_STRING Michal Simek
[U-Boot] [PATCH] cmd: dfu: Add error handling for board_usb_init Michal Simek
[U-Boot] [PATCH v2] cmd: dfu: Add error handling for board_usb_init Michal Simek
[U-Boot] [PATCH] pxe: Fix pxe boot with FIT image Wenbin Song
[U-Boot] [PATCH] pxe: Fix pxe boot with FIT image Wenbin Song
[U-Boot] [UBoot] [PATCH] configs: am4xhs: Modify SPL load address to fix UART boot issue Srinivas, Madan
[U-Boot] [PATCH 0/7] Adds support for secure boot on Keystone SoCs (K2E) Madan Srinivas
[U-Boot] [PATCH 1/7] include: image.h: Fixes build warning with CONFIG_FIT_IMAGE_POST_PROCESS Madan Srinivas
[U-Boot] [PATCH 2/7] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Madan Srinivas
[U-Boot] [PATCH 3/7] arm: omap-common: Enable support for K2 HS devices in u-boot Madan Srinivas
[U-Boot] [PATCH 4/7] arm: omap-common: Reuse secure image name between OMAP and keystone Madan Srinivas
[U-Boot] [PATCH 5/7] arm: mach-keystone: config.mk: Adds support for secure images on K2 Madan Srinivas
[U-Boot] [PATCH 6/7] doc: Updates info on using keystone secure devices from TI Madan Srinivas
[U-Boot] [PATCH 7/7] configs: Adds a defconfig for K2E High Security EVM Madan Srinivas
[U-Boot] [PATCH] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS Pratiyush Srivastava
[U-Boot] [PATCH][v2] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS Pratiyush Srivastava
[U-Boot] [PATCH][v2] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS Pratiyush Srivastava
[U-Boot] [PATCH][v2] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS Pratiyush Mohan Srivastava
[U-Boot] [PATCH] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS Pratiyush Mohan Srivastava
[U-Boot] [PATCH v3 0/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava
[U-Boot] [PATCH v3 1/4] usb: ums: support multiple controllers using controller_index Rajat Srivastava
[U-Boot] [PATCH v3 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings Rajat Srivastava
[U-Boot] [PATCH v3 3/4] armv8/fsl-layerscape: add dwc3 gadget driver support Rajat Srivastava
[U-Boot] [PATCH v3 4/4] armv8/fsl-layerscape: enable dwc3 gadget driver support Rajat Srivastava
[U-Boot] [PATCH] powerpc/mpc85xx: Update erratum workaround for A006379 York Sun
[U-Boot] [PATCH] armv8: ls2080a: Remove debug server support York Sun
[U-Boot] [PATCH] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS Edward L Swarthout
[U-Boot] [PATCH v2 2/3] zynqmp: Move config IDENT_STRING to defconfig Jagan Teki
[U-Boot] [PATCH v2 3/3] zynqmp: Remove unnnecessary board config file for dc4 Jagan Teki
[U-Boot] Regarding source code of u-boot Jagan Teki
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Jagan Teki
[U-Boot] [PATCH] sf: Disable 4-KB erase command for SPANSION S25FS128 Jagan Teki
[U-Boot] [PATCH] sf: Disable 4-KB erase command for SPANSION S25FS128 Jagan Teki
[U-Boot] Prospective contributer Jagan Teki
[U-Boot] Prospective contributer Jagan Teki
[U-Boot] [PATCH 1/6] sf: Simplify fastest read cmd code Jagan Teki
[U-Boot] [PATCH 2/6] sf: Remove e_rd_cmd from param table Jagan Teki
[U-Boot] [PATCH 3/6] spi: Use mode for rx mode flags Jagan Teki
[U-Boot] [PATCH 4/6] sf: Remove SECT_32K Jagan Teki
[U-Boot] [PATCH 5/6] sf: Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flash Jagan Teki
[U-Boot] [PATCH 6/6] sf: Move flags macro's to spi_flash_params{} members Jagan Teki
[U-Boot] Pull request: u-boot-spi/master Jagan Teki
[U-Boot] [PATCH v2 00/22] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v2 01/22] sf: Simplify fastest read cmd code Jagan Teki
[U-Boot] [PATCH v2 02/22] sf: Remove e_rd_cmd from param table Jagan Teki
[U-Boot] [PATCH v2 03/22] spi: Use mode for rx mode flags Jagan Teki
[U-Boot] [PATCH v2 04/22] sf: Remove SECT_32K Jagan Teki
[U-Boot] [PATCH v2 05/22] sf: Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flash Jagan Teki
[U-Boot] [PATCH v2 06/22] sf: Move flags macro's to spi_flash_params{} members Jagan Teki
[U-Boot] [PATCH v2 07/22] sf: Adopt flash table INFO macro from Linux Jagan Teki
[U-Boot] [PATCH v2 08/22] sf: Add JEDEC_ID and JEDEC_EXT macro Jagan Teki
[U-Boot] [PATCH v2 09/22] sf: Rename spi_flash_params => spi_flash_info Jagan Teki
[U-Boot] [PATCH v2 10/22] sf: Add JEDEC_MFR Jagan Teki
[U-Boot] [PATCH v2 11/22] sf: Simplify lock ops detection code Jagan Teki
[U-Boot] [PATCH v2 12/22] sf: sandbox: Fix ID exctract from spi_flash_info Jagan Teki
[U-Boot] [PATCH v2 13/22] sf: Cleanup spi_flash_info{} Jagan Teki
[U-Boot] [PATCH v2 14/22] sf: Cleanup sf_params Jagan Teki
[U-Boot] [PATCH v2 15/22] sf: nr_sectors -> n_sectors Jagan Teki
[U-Boot] [PATCH v2 16/22] sf: Add SPI_FLASH_MAX_ID_LEN Jagan Teki
[U-Boot] [PATCH v2 17/22] sf: Increase max id length by 1 byte Jagan Teki
[U-Boot] [PATCH v2 18/22] sf: Add INFO6 flash_info macro Jagan Teki
[U-Boot] [PATCH v2 19/22] sf: params: Add S25FS256S_64K spi flash support Jagan Teki
[U-Boot] [PATCH v2 20/22] sf: Remove legacy idcode detection code Jagan Teki
[U-Boot] [PATCH v2 21/22] sf: Remove non-meaningful comments Jagan Teki
[U-Boot] [PATCH v2 22/22] sf: Rename sf_params.c to spi_flash_ids Jagan Teki
[U-Boot] [PATCH v2 00/22] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v2 03/22] spi: Use mode for rx mode flags Jagan Teki
[U-Boot] [PATCH v2 07/22] sf: Adopt flash table INFO macro from Linux Jagan Teki
[U-Boot] [PATCH v3 03/22] spi: Use mode for rx mode flags Jagan Teki
[U-Boot] [PATCH v2 00/22] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v3 01/27] sf: Simplify fastest read cmd code Jagan Teki
[U-Boot] [PATCH v3 02/27] sf: Remove e_rd_cmd from param table Jagan Teki
[U-Boot] [PATCH v3 03/27] spi: Use mode for rx mode flags Jagan Teki
[U-Boot] [PATCH v3 04/27] spi: Remove SPI_RX_FAST Jagan Teki
[U-Boot] [PATCH v3 05/27] sf: Remove SECT_32K Jagan Teki
[U-Boot] [PATCH v3 06/27] sf: Add CONFIG_SPI_FLASH_USE_4K_SECTORS in spi_flash Jagan Teki
[U-Boot] [PATCH v3 07/27] sf: Move flags macro's to spi_flash_params{} members Jagan Teki
[U-Boot] [PATCH v3 08/27] sf: Adopt flash table INFO macro from Linux Jagan Teki
[U-Boot] [PATCH v3 09/27] sf: Add JEDEC_ID and JEDEC_EXT macro Jagan Teki
[U-Boot] [PATCH v3 10/27] sf: Rename spi_flash_params => spi_flash_info Jagan Teki
[U-Boot] [PATCH v3 11/27] sf: Add JEDEC_MFR Jagan Teki
[U-Boot] [PATCH v3 12/27] sf: Simplify lock ops detection code Jagan Teki
[U-Boot] [PATCH v3 13/27] sf: sandbox: Fix ID exctract from spi_flash_info Jagan Teki
[U-Boot] [PATCH v3 14/27] sf: Cleanup spi_flash_info{} Jagan Teki
[U-Boot] [PATCH v3 15/27] sf: Cleanup sf_params Jagan Teki
[U-Boot] [PATCH v3 16/27] sf: nr_sectors -> n_sectors Jagan Teki
[U-Boot] [PATCH v3 17/27] sf: Add SPI_FLASH_MAX_ID_LEN Jagan Teki
[U-Boot] [PATCH v3 18/27] sf: Increase max id length by 1 byte Jagan Teki
[U-Boot] [PATCH v3 19/27] sf: Add INFO6 flash_info macro Jagan Teki
[U-Boot] [PATCH v3 20/27] sf: params: Add S25FS256S_64K spi flash support Jagan Teki
[U-Boot] [PATCH v3 21/27] sf: Remove legacy idcode detection code Jagan Teki
[U-Boot] [PATCH v3 22/27] sf: Remove non-meaningful comments Jagan Teki
[U-Boot] [PATCH v3 23/27] sf: Rename sf_params.c to spi_flash_ids Jagan Teki
[U-Boot] [PATCH v3 24/27] sf: ids: Use small letter's with flash name Jagan Teki
[U-Boot] [PATCH v3 25/27] sf: ids: Use small letter in ext_jedec Jagan Teki
[U-Boot] [PATCH v3 26/27] sf: Rename few local functions Jagan Teki
[U-Boot] [PATCH v3 27/27] spi: Remove dual flash code Jagan Teki
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH] spi: tegra20: fix mode selection logic Jagan Teki
[U-Boot] [PATCH] driver: spi: add spansion s25fs-s family protect/unprotect Jagan Teki
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection Jagan Teki
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Jagan Teki
[U-Boot] Remove atmel_dataflash_spi.c Jagan Teki
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Jagan Teki
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Jagan Teki
[U-Boot] [PATCH] spi: tegra: fix hand in set_mode() Jagan Teki
[U-Boot] [BUG] divide by 0 in spi flash probe Jagan Teki
[U-Boot] [PATCH] spi: tegra: fix hand in set_mode() Jagan Teki
[U-Boot] Remove atmel_dataflash_spi.c Jagan Teki
[U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3 Benoît Thébaudeau
[U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3 Benoît Thébaudeau
[U-Boot] UMS - maintain connection John Tobias
[U-Boot] UMS - maintain connection John Tobias
[U-Boot] UMS - maintain connection John Tobias
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage John Tobias
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage John Tobias
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage John Tobias
[U-Boot] [PATCH v2] cmd: gpt: fix the wrong size parse for the last partition Michael Trimarchi
[U-Boot] [PATCH] sf: Disable 4-KB erase command for SPANSION S25FS128 Michael Trimarchi
[U-Boot] [PATCH] sf: Disable 4-KB erase command for SPANSION S25FS128 Michael Trimarchi
[U-Boot] [PATCH] efi: console: Correctly report modes Emmanuel Vadot
[U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board Marek Vasut
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Marek Vasut
[U-Boot] [PATCH v2 0/3] usb: arrange Kconfig entries for USB host support Marek Vasut
[U-Boot] [PATCH 0/5] usb: fsl: Add code to use CONFIG_DM_USB Marek Vasut
[U-Boot] [PATCH] serial: Enable checking UART is ready for console based on device tree Marek Vasut
[U-Boot] [PATCH v2 10/10] boston: Introduce support for the MIPS Boston development board Marek Vasut
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Marek Vasut
[U-Boot] [PATCH] arm: cache: always flush cache line size for page table Marek Vasut
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Marek Vasut
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Marek Vasut
[U-Boot] [PATCH 1/4] eth: asix88179: Add VID:DID for Cypress GX3 USB Ethernet Adapter Marek Vasut
[U-Boot] [PATCH 2/4] eth: asix88179: Fix receiving on big endian system Marek Vasut
[U-Boot] [PATCH 3/4] eth: asix88179: Prepare supporting the driver model Marek Vasut
[U-Boot] [PATCH 4/4] eth: asix88179: Add support for the driver model Marek Vasut
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Marek Vasut
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Marek Vasut
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Marek Vasut
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model Marek Vasut
[U-Boot] [PATCH v2] eth: asix88179: Add support for the driver model Marek Vasut
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Marek Vasut
[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Marek Vasut
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Marek Vasut
[U-Boot] [PATCH v3 2/4] usb: dwc3: Add helper functions to enable snooping and burst settings Marek Vasut
[U-Boot] [PATCH] malloc_simple: Add simple malloc free function Marek Vasut
[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Marek Vasut
[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Marek Vasut
[U-Boot] [PATCH] spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max value Marek Vasut
[U-Boot] [PATCH] spi: cadence_qspi_apb: Ensure baudrate doesn't exceed max value Marek Vasut
[U-Boot] [PULL] u-boot-socfpga/master Marek Vasut
[U-Boot] [RESEND PATCH v3] dm: atmel: Add driver model support for the ehci driver Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PATCH] arm: socfpga: stratix10: Add SOCFPGA Stratix10 base address Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PATCH v3 1/2] eth: asix88179: Prepare supporting the driver model Marek Vasut
[U-Boot] [PATCH v3 2/2] eth: asix88179: Add support for the driver model Marek Vasut
[U-Boot] [RFC PATCH] ARM: cache: cp15: Align addresses when initial page_table setup is flushed Marek Vasut
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Marek Vasut
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Marek Vasut
[U-Boot] [PULL] u-boot-usb/master Marek Vasut
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Marek Vasut
[U-Boot] [U-Boot, RESEND, v3] dm: atmel: Add driver model support for the ehci driver Marek Vasut
[U-Boot] [U-Boot, RESEND, v3] dm: atmel: Add driver model support for the ehci driver Marek Vasut
[U-Boot] [PATCH 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [GIT] Pull request: u-boot-dfu Marek Vasut
[U-Boot] [PATCH 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [PATCH v3 0/3] Modifies the erratum A006261 according to endianness Marek Vasut
[U-Boot] [PATCH 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [PATCH 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Marek Vasut
[U-Boot] [PATCH 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [PATCH v2 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Marek Vasut
[U-Boot] [PATCH] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Marek Vasut
[U-Boot] [PATCH] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Marek Vasut
[U-Boot] [PATCH v2 0/4] Migrate Vybrid USB driver to driver model Marek Vasut
[U-Boot] [PATCH v3 0/3] Modifies the erratum A006261 according to endianness Marek Vasut
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage Marek Vasut
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage Marek Vasut
[U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH] usb: gadget: ci_udc: fix suspend/resume of USB Mass Storage Marek Vasut
[U-Boot] [PATCH v3 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [PATCH v2 2/4] board: evb-rk3399: add api to support dwc3 gadget Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller Marek Vasut
[U-Boot] [PATCH v2 2/4] board: evb-rk3399: add api to support dwc3 gadget Marek Vasut
[U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [GIT] Pull request: u-boot-dfu Marek Vasut
[U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [PATCH v3 2/4] board: evb-rk3399: add api to support dwc3 gadget Marek Vasut
[U-Boot] [PATCH v3 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
[U-Boot] [PATCH] eth: asix88179: Reset device during probe with DM_ETH enabled Marek Vasut
[U-Boot] [PATCH 1/3] omap3: Move to select SUPPORT_SPL for all Lokesh Vutla
[U-Boot] [PATCH 2/3] omap3, omap4: Enable USE_TINY_PRINTF for all Lokesh Vutla
[U-Boot] [PATCH 3/3] omap3: Drop omap3_evm_quick_* targets Lokesh Vutla
[U-Boot] [PATCH v4] arm: cache: always flush cache line size for page table Lokesh Vutla
[U-Boot] [PATCH] drivers: net: cpsw: always flush cache with cache line aligned Lokesh Vutla
[U-Boot] [PATCH v2] drivers: net: cpsw: always flush cache of size PKTSIZE_ALIGN Lokesh Vutla
[U-Boot] [PATCH] drivers: net: cpsw: always flush cache with cache line aligned Lokesh Vutla
[U-Boot] [PATCH v2] drivers: net: cpsw: always flush cache of size PKTSIZE_ALIGN Lokesh Vutla
[U-Boot] [PATCH v2] drivers: net: cpsw: always flush cache of size PKTSIZE_ALIGN Lokesh Vutla
[U-Boot] [PATCH v3] drivers: net: cpsw: always flush cache of size aligned to PKTALIGN Lokesh Vutla
[U-Boot] [PATCH] configs: dra7xx_evm: enable eth driver model Lokesh Vutla
[U-Boot] [PATCH 0/5] ARM: Enable CMD_TIME on all TI platforms Lokesh Vutla
[U-Boot] [PATCH 1/5] configs: am335x: Enable CMD_TIME Lokesh Vutla
[U-Boot] [PATCH 2/5] configs: am43xx: Enable CMD_TIME Lokesh Vutla
[U-Boot] [PATCH 3/5] configs: am57xx: Enable CMD_TIME Lokesh Vutla
[U-Boot] [PATCH 4/5] configs: dra7xx: Enable CMD_TIME Lokesh Vutla
[U-Boot] [PATCH 5/5] configs: ks2: Enable CMD_TIME Lokesh Vutla
[U-Boot] [PATCH 0/5] ARM: Enable CMD_TIME on all TI platforms Lokesh Vutla
[U-Boot] [PATCH 0/2] ARM: OMAP4+: vcores: Make scale_vcores common Lokesh Vutla
[U-Boot] [PATCH 1/2] ARM: OMAP5+: vcores: Drop unnecessary #ifndefs Lokesh Vutla
[U-Boot] [PATCH 2/2] ARM: OMAP4+: vcores: Remove duplicated code Lokesh Vutla
[U-Boot] [PATCH 02/13] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Lokesh Vutla
[U-Boot] [PATCH 03/13] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE as Kconfig option Lokesh Vutla
[U-Boot] [PATCH 06/13] Kconfig: Separate AM33XX SOC config from target board config Lokesh Vutla
[U-Boot] [PATCH 00/13] Cleanups to allow secure boot on AM33xx devices Lokesh Vutla
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Lokesh Vutla
[U-Boot] [PATCH 02/13] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Lokesh Vutla
[U-Boot] OMAP3 SPL Overflow Lokesh Vutla
[U-Boot] [PATCH 1/3] ARM: AM43xx: Enable post-processing of FIT artifacts loaded by U-Boot Lokesh Vutla
[U-Boot] [PATCH 2/3] ARM: DRA7xx: Enable post-processing of FIT artifacts loaded by U-Boot Lokesh Vutla
[U-Boot] [PATCH 3/3] ARM: AM57xx: Enable post-processing of FIT artifacts loaded by U-Boot Lokesh Vutla
[U-Boot] [PATCH v3 05/11] am33xx: config.mk: Fix option used to enable SPI SPL image type Lokesh Vutla
[U-Boot] [PATCH v3 08/11] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE Lokesh Vutla
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Lokesh Vutla
[U-Boot] [PATCH 1/3] configs: dra7xx: get rid of duplicate #define Lokesh Vutla
[U-Boot] [PATCH 2/3] board: ti: am57xx-evm: fix build warnings Lokesh Vutla
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Lokesh Vutla
[U-Boot] [PATCH 3/3] ARM: am57xx_evm: enable DFU support Lokesh Vutla
[U-Boot] [PATCH 0/2] board: k2g: Enable ECC support Lokesh Vutla
[U-Boot] [PATCH 1/2] board: ks2: Enable ECC using detected DDR size Lokesh Vutla
[U-Boot] [PATCH 2/2] board: k2g: Enable ECC byte lane Lokesh Vutla
[U-Boot] [PATCH 0/2] ARM: TI: Enable DISPLAY_{CPU/BOARD}INFO Lokesh Vutla
[U-Boot] [PATCH 1/2] ARM: AM437X: Add Silicon ID support Lokesh Vutla
[U-Boot] [PATCH 2/2] configs: ti: armv7_common: Enable DISPLAY_{CPU/BOARD}INFO Lokesh Vutla
[U-Boot] [PATCH] TI: Rework SRAM definitions and maximums Lokesh Vutla
[U-Boot] [PATCH 2/2] configs: ti: armv7_common: Enable DISPLAY_{CPU/BOARD}INFO Lokesh Vutla
[U-Boot] [PATCH v2 0/3] ARM: TI: Enable DISPLAY_{CPU/BOARD}INFO Lokesh Vutla
[U-Boot] [PATCH v2 1/3] ARM: AM437X: Add Silicon ID support Lokesh Vutla
[U-Boot] [PATCH v2 2/3] ARM: TI: Enable DISPLAY_CPUINFO on all SoCs Lokesh Vutla
[U-Boot] [PATCH v2 3/3] ARM: TI: Enable DISPLAY_BOARDINFO on all boards Lokesh Vutla
[U-Boot] [PATCH 2/7] arm: mach-keystone: Implements FIT post-processing call for keystone SoCs Lokesh Vutla
[U-Boot] [PATCH v4 01/10] Kconfig: Separate AM33XX SOC config from target board config Lokesh Vutla
[U-Boot] [PATCH v4 02/10] am33xx: config.mk: Add support for additional secure boot image types Lokesh Vutla
[U-Boot] [PATCH v4 03/10] doc: Update info on using AM33xx secure devices from TI Lokesh Vutla
[U-Boot] [PATCH v4 04/10] am33xx: config.mk: Fix option used to enable SPI SPL image type Lokesh Vutla
[U-Boot] [PATCH v4 05/10] board: am33xx-hs: Allow post-processing of FIT image on AM33xx Lokesh Vutla
[U-Boot] [PATCH v4 06/10] ti: omap-common: Allow AM33xx devices to be built securely Lokesh Vutla
[U-Boot] [PATCH v4 07/10] am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE Lokesh Vutla
[U-Boot] [PATCH v4 08/10] config: Remove usage of CONFIG_STORAGE_EMMC Lokesh Vutla
[U-Boot] [PATCH v4 09/10] ti_armv7_common: Disable Falcon Mode on HS devices Lokesh Vutla
[U-Boot] [PATCH v4 10/10] defconfig: Add a config for AM335x High Security EVM with SD Boot support Lokesh Vutla
[U-Boot] ext4 write support and big-endian machines Michael Walle
[U-Boot] ext4 write support and big-endian machines Michael Walle
[U-Boot] ext4 write support and big-endian machines Michael Walle
[U-Boot] [PATCH 1/4] ext4: change structure fields to __le/__be types Michael Walle
[U-Boot] [PATCH 2/4] ext4: use kernel names for byte swaps Michael Walle
[U-Boot] [RFC PATCH 3/4] ext4: fix endianess problems in ext4 write support Michael Walle
[U-Boot] [PATCH 4/4] ext4: fix wrong usage of le32_to_cpu() Michael Walle
[U-Boot] [RFC PATCH 3/4] ext4: fix endianess problems in ext4 write support Michael Walle
[U-Boot] [RFC PATCH 3/4] ext4: fix endianess problems in ext4 write support Michael Walle
[U-Boot] [PATCH v2 0/5] ext4: endianess fixes Michael Walle
[U-Boot] [PATCH v2 1/5] ext4: change structure fields to __le/__be types Michael Walle
[U-Boot] [PATCH v2 2/5] ext4: use kernel names for byte swaps Michael Walle
[U-Boot] [PATCH v2 3/5] ext4: fix endianess problems in ext4 write support Michael Walle
[U-Boot] [PATCH v2 4/5] ext4: fix wrong usage of le32_to_cpu() Michael Walle
[U-Boot] [PATCH v2 5/5] ext4: optimize direntlen loops Michael Walle
[U-Boot] [PATCH v3 0/4] ext4: endianess fixes Michael Walle
[U-Boot] [PATCH v3 1/4] ext4: change structure fields to __le/__be types Michael Walle
[U-Boot] [PATCH v3 2/4] ext4: use kernel names for byte swaps Michael Walle
[U-Boot] [PATCH v3 3/4] ext4: fix endianess problems in ext4 write support Michael Walle
[U-Boot] [PATCH v3 4/4] ext4: fix wrong usage of le32_to_cpu() Michael Walle
[U-Boot] [PATCH v3 3/4] ext4: fix endianess problems in ext4 write support Michael Walle
[U-Boot] [PATCH] armv8: Remove the codes about switching to EL1 before jumping to kernel Huan Wang
[U-Boot] [PATCH] Add a power domain framework/uclass Stephen Warren
[U-Boot] [PATCH] serial: bcm283x_mu: Detect disabled serial device Stephen Warren
[U-Boot] [PATCH 1/5] pci: tegra: port to standard clock/reset/pwr domain APIs Stephen Warren
[U-Boot] [PATCH 3/5] i2c: tegra: add standardized clk/reset API support Stephen Warren
[U-Boot] [PATCH 2/9] ARM: tegra: add BPMP DT bindings Stephen Warren
[U-Boot] [PATCH 4/9] misc: add Tegra BPMP driver Stephen Warren
[U-Boot] [PATCH 5/9] clock: add Tegra186 clock driver Stephen Warren
[U-Boot] [PATCH 8/9] mmc: tegra: port to standard clock/reset APIs Stephen Warren
[U-Boot] [PATCH 2/7] misc: Tegra BPMP: support child node devices Stephen Warren
[U-Boot] [PATCH 6/7] ARM: tegra: enable SD card on p2771-0000 Stephen Warren
[U-Boot] [PATCH V2] misc: Tegra BPMP: support child node devices Stephen Warren
[U-Boot] [PATCH 4/9] misc: add Tegra BPMP driver Stephen Warren
[U-Boot] [PATCH 1/2] fdt_support: fdt_translate_address() blob const correctness Stephen Warren
[U-Boot] [PATCH 2/2] fdt: allow fdtdec_get_addr_size_*() to translate addresses Stephen Warren
[U-Boot] [PATCH V2] misc: add Tegra BPMP driver Stephen Warren
[U-Boot] tegra124 jetson-tk1 ethernet problems. Stephen Warren
[U-Boot] [PATCH 5/9] test: Drop the cmd() function Stephen Warren
[U-Boot] [PATCH 7/9] test: vboot: Put each test variant in its own section Stephen Warren
[U-Boot] [PATCH 9/9] test: Adjust run_command_list() to return a list of strings Stephen Warren
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions Stephen Warren
[U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3 Stephen Warren
[U-Boot] [PATCH] tegra: config: Add 'pci enum' to preboot when PCI is enabled Stephen Warren
[U-Boot] [PATCH 1/5] pci: tegra: port to standard clock/reset/pwr domain APIs Stephen Warren
[U-Boot] [PATCH 8/9] mmc: tegra: port to standard clock/reset APIs Stephen Warren
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Stephen Warren
[U-Boot] [PATCH 1/2 RESEND] fdt_support: fdt_translate_address() blob const correctness Stephen Warren
[U-Boot] [PATCH 2/2 RESEND] fdt: allow fdtdec_get_addr_size_*() to translate addresses Stephen Warren
[U-Boot] [PATCH] ARM: tegra: add IVC protocol implementation Stephen Warren
[U-Boot] [PATCH 5/9] clock: add Tegra186 clock driver Stephen Warren
[U-Boot] [PATCH V3 1/6] misc: add "call" uclass op Stephen Warren
[U-Boot] [PATCH V3 2/6] misc: add Tegra BPMP driver Stephen Warren
[U-Boot] [PATCH V3 3/6] clock: add Tegra186 clock driver Stephen Warren
[U-Boot] [PATCH V3 4/6] reset: add Tegra186 reset driver Stephen Warren
[U-Boot] [PATCH V3 5/6] power domain: add Tegra186 driver Stephen Warren
[U-Boot] [PATCH V3 6/6] i2c: add Tegra186 BPMP driver Stephen Warren
[U-Boot] [PATCH V2 1/3] mmc: tegra: port to standard clock/reset APIs Stephen Warren
[U-Boot] [PATCH V2 2/3] pci: tegra: port to standard clock/reset/pwr domain APIs Stephen Warren
[U-Boot] [PATCH V2 3/3] i2c: tegra: add standardized clk/reset API support Stephen Warren
[U-Boot] [PATCH 1/2 RESEND] fdt_support: fdt_translate_address() blob const correctness Stephen Warren
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Stephen Warren
[U-Boot] [PATCH 2/2 V4] misc: add Tegra BPMP driver Stephen Warren
[U-Boot] [PATCH] ARM: tegra: move ft_system_setup() Stephen Warren
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Stephen Warren
[U-Boot] [PATCH V4 1/4] clock: add Tegra186 clock driver Stephen Warren
[U-Boot] [PATCH V4 2/4] reset: add Tegra186 reset driver Stephen Warren
[U-Boot] [PATCH V4 3/4] power domain: add Tegra186 driver Stephen Warren
[U-Boot] [PATCH V4 4/4] i2c: add Tegra186 BPMP driver Stephen Warren
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Stephen Warren
[U-Boot] [PATCH] ARM: tegra: fix trimslice environment location Stephen Warren
[U-Boot] [PATCH v2] serial: bcm283x_mu: Detect disabled serial device Stephen Warren
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Stephen Warren
[U-Boot] [PATCH 1/2] ARM: tegra: reduce CSITE clock from 204M to 136M Stephen Warren
[U-Boot] [PATCH 2/2] ARM: tegra: set vdd_core for Jetson TK1 Stephen Warren
[U-Boot] Nvidia Trega Tk1 - /cpus/cpu at 0 missing clock-frequency property Stephen Warren
[U-Boot] [PATCH] spi: tegra20: fix mode selection logic Stephen Warren
[U-Boot] tegra124 jetson-tk1 ethernet problems. Stephen Warren
[U-Boot] [PATCH 1/2] bcm2835_gpio: Implement GPIOF_FUNC Stephen Warren
[U-Boot] [PATCH] ARM: make ARMV7_LPAE select PHYS_64BIT Stephen Warren
[U-Boot] [PATCH] spi: tegra20: fix mode selection logic Stephen Warren
[U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3 Stephen Warren
[U-Boot] [PATCH] clk.h: inline clk_get_by_name() Stephen Warren
[U-Boot] test.py and tftp crc32 test? Stephen Warren
[U-Boot] [PATCH v4 2/2] serial: bcm283x_mu: Detect disabled serial device Stephen Warren
[U-Boot] test.py and tftp crc32 test? Stephen Warren
[U-Boot] [PATCH] test/py: match prompt only at line boundaries Stephen Warren
[U-Boot] [PATCH 2/2] fs/fat: Optimizes memory size with single global variable instead of 3 Stephen Warren
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Stephen Warren
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Stephen Warren
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Stephen Warren
[U-Boot] [PATCH] spi: tegra: fix hand in set_mode() Stephen Warren
[U-Boot] [PATCH] spi: tegra20: fix mode selection logic Stephen Warren
[U-Boot] [PATCH 1/2] ARM: tegra: fix Tegra186 I2C clock name Stephen Warren
[U-Boot] [PATCH 2/2] ARM: tegra: fix Tegra186 SDHCI clock/reset names Stephen Warren
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Stephen Warren
[U-Boot] [PATCH] spi: tegra: fix hand in set_mode() Stephen Warren
[U-Boot] [PATCH] spi: tegra: fix hand in set_mode() Stephen Warren
[U-Boot] CPU Clock frequency at boot time - Nvidia Jetson TK1 Stephen Warren
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Stephen Warren
[U-Boot] [PATCH] ARM: tegra: remove stale nvidia, bpmp I2C DT property Stephen Warren
[U-Boot] ARM: tegra: jetson-tk1: Increase console buffer size Stephen Warren
[U-Boot] [PATCH] ARM: tegra: increase console buffer size and sys args num Stephen Warren
[U-Boot] CPU Clock frequency at boot time - Nvidia Jetson TK1 Stephen Warren
[U-Boot] [ARM] RFC: Add board support for Colorado Engineering TK1-SOM Stephen Warren
[U-Boot] [PATCH] ARM: tegra: increase console buffer size and sys args num Stephen Warren
[U-Boot] [ARM] RFC: Add board support for Colorado Engineering TK1-SOM Stephen Warren
[U-Boot] CPU Clock frequency at boot time - Nvidia Jetson TK1 Stephen Warren
[U-Boot] [RFC PATCH 1/2] Kconfig: Add a whitelist of ad-hoc CONFIG options Stephen Warren
[U-Boot] [RFC PATCH 2/2] Makefile: Give a build error if ad-hoc CONFIG options are added Stephen Warren
[U-Boot] [PATCH 06/42] Use separate options for TPL support Stephen Warren
[U-Boot] CPU Clock frequency at boot time - Nvidia Jetson TK1 Stephen Warren
[U-Boot] u-boot - raspberry pi Stephen Warren
[U-Boot] u-boot - raspberry pi Stephen Warren
[U-Boot] [PATCH] ARM: tegra: use numeric versioning for p2771-0000 Stephen Warren
[U-Boot] [PATCH] ARM: tegra: use numeric versioning for p2771-0000 Stephen Warren
[U-Boot] SZ_* errors compiling mmc master branch Stephen Warren
[U-Boot] [PATCH V2] ARM: tegra: use numeric versioning for p2771-0000 Stephen Warren
[U-Boot] [PATCH 1/4] ARM: tegra: remove wrong dependency on SPL_BUILD Stephen Warren
[U-Boot] [PATCH v1 1/2] clk: at91: Fix at91-pmc and at91-sckc's class ID Stephen Warren
[U-Boot] [PATCH v1 2/2] clk: at91: Add .ops callback for clk_generic Stephen Warren
[U-Boot] [PATCH 1/4] ARM: tegra: remove wrong dependency on SPL_BUILD Stephen Warren
[U-Boot] [PATCH] ARM: tegra: Add support for TK1-SOM board from Colorado Engineering Stephen Warren
[U-Boot] SZ_* errors compiling mmc master branch Stephen Warren
[U-Boot] [PATCH 8/9] mmc: tegra: port to standard clock/reset APIs Tom Warren
[U-Boot] Pull request, u-boot-tegra/master Tom Warren
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Tom Warren
[U-Boot] [PATCH 1/2 V4] misc: add "call" uclass op Tom Warren
[U-Boot] Pull request, u-boot-tegra/master Tom Warren
[U-Boot] [PATCH] spi: tegra: fix hand in set_mode() Tom Warren
[U-Boot] [PATCH] spi: tegra: fix hand in set_mode() Tom Warren
[U-Boot] Pull request, u-boot-tegra/master Tom Warren
[U-Boot] Older u-boot mangles UBI from ubinize 1.5.2 Richard Weinberger
[U-Boot] [LEDE-DEV] Older u-boot mangles UBI from ubinize 1.5.2 Richard Weinberger
[U-Boot] [PATCH v2] common: env_nand: Ensure that we have nand_info[0] prior to use Scott Wood
[U-Boot] [PATCH v3] common: env_nand: Ensure that we have nand_info[0] prior to use Scott Wood
[U-Boot] [PATCH] nand: Fix set_dev checks for no device Scott Wood
[U-Boot] [PATCH] nand: Fix set_dev checks for no device Scott Wood
[U-Boot] [PATCH] nand: Fix set_dev checks for no device Scott Wood
[U-Boot] [PATCH] nand: Fix nand info for no device Scott Wood
[U-Boot] [PATCH 0/2] at91: video: add driver for Atmel HLCD controller Songjun Wu
[U-Boot] [PATCH 1/2] at91: video: Support driver-model for the HLCD driver Songjun Wu
[U-Boot] [PATCH 2/2] at91: video: DT binding for HLCDC driver Songjun Wu
[U-Boot] [PATCH 7/8] armv8: ls1046a: disable SATA ECC in DCSR Shaohui Xie
[U-Boot] [PATCH 5/8] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app Shaohui Xie
[U-Boot] [PATCH] rockchip: add support for rk3288 miniarm board Ziyuan Xu
[U-Boot] [PATCH v2] rockchip: add support for rk3288 miniarm board Ziyuan Xu
[U-Boot] [PATCH] arm: re-implement proper ISB instruction for ARMv7-A Ziyuan Xu
[U-Boot] [PATCH] rockchip: rockchip, sdram-channel 0xff fix remaining dts Ziyuan Xu
[U-Boot] [PATCH] rockchip: rockchip, sdram-channel 0xff fix remaining dts Ziyuan Xu
[U-Boot] [PATCH] MAINTAINERS, git-mailrc: Update the mmc maintainer Ziyuan Xu
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions Ziyuan Xu
[U-Boot] [PATCH] configs: rk3399: add gpt and fs support Ziyuan Xu
[U-Boot] [PATCH] configs: rk3399: add gpt and fs support Ziyuan Xu
[U-Boot] [PATCH] configs: rk3399: add gpt and fs support Ziyuan Xu
[U-Boot] [PATCH 1/2] rockchip: add basic partitions support for rk3288 Ziyuan Xu
[U-Boot] [PATCH 2/2] rockchip: add usb mass storage feature support for rk3288 Ziyuan Xu
[U-Boot] [RESEND PATCH 1/2] rockchip: add basic partitions support for rk3288 Ziyuan Xu
[U-Boot] [RESEND PATCH 2/2] rockchip: add usb mass storage feature support for rk3288 Ziyuan Xu
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions Ziyuan Xu
[U-Boot] [PATCH v2 3/3] CONFIG_EFI_LOADER breaks rock2 kernel loading Ziyuan Xu
[U-Boot] [PATCH] rockchip: Fix SPL console output when ROCKCHIP_SPL_BACK_TO_BROM is enabled Ziyuan Xu
[U-Boot] disabling mmc in spl when booting using bootrom Ziyuan Xu
[U-Boot] disabling mmc in spl when booting using bootrom Ziyuan Xu
[U-Boot] [PATCH] rockchip: use dummy byte only enable OF_PLATDATA Ziyuan Xu
[U-Boot] [PATCH] rockchip: Fix SPL console output when ROCKCHIP_SPL_BACK_TO_BROM is enabled Ziyuan Xu
[U-Boot] [PATCH] README: add cmd directory description Ziyuan Xu
[U-Boot] *** Your dtc is too old, please upgrade to dtc 1.4 or newer make: *** [checkdtc] Error 1 Ziyuan Xu
[U-Boot] [RFC PATCH] rockchip: rk3288: skip lowlevel_init process Ziyuan Xu
[U-Boot] [PATCH v2 1/2] Disable SPL_MMC_SUPPORT if ROCKCHIP_SPL_BACK_TO_BROM is enabled. Ziyuan Xu
[U-Boot] [PATCH v2 2/2] Enable ROCKCHIP_SPL_BACK_TO_BROM for rock2 board Ziyuan Xu
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode Ziyuan Xu
[U-Boot] [PATCH 0/3] Some Kconfig move/fixups Masahiro Yamada
[U-Boot] A command to discard saved environments? Masahiro Yamada
[U-Boot] A command to discard saved environments? Masahiro Yamada
[U-Boot] [PULL] u-boot-usb/master Masahiro Yamada
[U-Boot] [PATCH 00/14] ARM: uniphier: updates for v2016.09-rc2 Masahiro Yamada
[U-Boot] [PATCH 01/14] ARM: uniphier: refactor outer cache code Masahiro Yamada
[U-Boot] [PATCH 02/14] ARM: uniphier: support prefetch and touch operations for outer cache Masahiro Yamada
[U-Boot] [PATCH 03/14] ARM: uniphier: do not compile v7_outer_cache_disable if L2 is disabled Masahiro Yamada
[U-Boot] [PATCH 04/14] ARM: uniphier: refactor L2 zero-touching code in lowlevel_init Masahiro Yamada
[U-Boot] [PATCH 05/14] ARM: uniphier: fix ROM boot mode for PH1-sLD3 Masahiro Yamada
[U-Boot] [PATCH 06/14] ARM: uniphier: move lowlevel debug init code after page table switch Masahiro Yamada
[U-Boot] [PATCH 07/14] ARM: uniphier: export uniphier_cache_enable/disable functions Masahiro Yamada
[U-Boot] [PATCH 08/14] ARM: uniphier: reuse uniphier_cache_disable() for lowlevel_init Masahiro Yamada
[U-Boot] [PATCH 09/14] ARM: uniphier: move outer cache register macros to .c file Masahiro Yamada
[U-Boot] [PATCH 10/14] ARM: uniphier: move (and rename) CONFIG_UNIPHIER_L2CACHE_ON to Kconfig Masahiro Yamada
[U-Boot] [PATCH 11/14] ARM: uniphier: fix CONFIG_SYS_CACHELINE_SIZE when outer cache is on Masahiro Yamada
[U-Boot] [PATCH 12/14] ARM: uniphier: add uniphier_cache_inv_way() to support way invalidation Masahiro Yamada
[U-Boot] [PATCH 13/14] ARM: uniphier: add uniphier_cache_set_active_ways() Masahiro Yamada
[U-Boot] [PATCH 14/14] ARM: uniphier: add PSCI support for UniPhier ARMv7 SoCs Masahiro Yamada
[U-Boot] [PATCH 00/14] ARM: uniphier: updates for v2016.09-rc2 Masahiro Yamada
[U-Boot] pull request: u-boot-uniphier/master Masahiro Yamada
[U-Boot] [PATCH] ARM: make ARMV7_LPAE select PHYS_64BIT Masahiro Yamada
[U-Boot] A command to discard saved environments? Masahiro Yamada
[U-Boot] [PATCH] kconfig: use bool instead of boolean for type definition attributes Masahiro Yamada
[U-Boot] [PATCH v2] kconfig: use bool instead of boolean for type definition attributes Masahiro Yamada
[U-Boot] [PATCH v2 1/2] cmd: Split 'bootz' and 'booti' out from 'bootm' Masahiro Yamada
[U-Boot] [PATCH] mmc: uniphier-sd: add static qualifiers to probe and remove callbacks Masahiro Yamada
[U-Boot] [PATCH] ARM: make ARMV7_LPAE select PHYS_64BIT Masahiro Yamada
[U-Boot] [PATCH 1/4] pinctrl: generic: scan for "pins" and "groups" properties in sub-nodes Masahiro Yamada
[U-Boot] [PATCH] pinctrl: fix typos in comment blocks of pinconfig_post_bind() Masahiro Yamada
[U-Boot] [PATCH] tools: moveconfig: add Xtensa GCC prefix to CROSS_COMPILE list Masahiro Yamada
[U-Boot] [PATCH v2] tools: moveconfig: add Xtensa GCC prefix to CROSS_COMPILE list Masahiro Yamada
[U-Boot] [PATCH] treewide: fix "followings" to "following" Masahiro Yamada
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Masahiro Yamada
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Masahiro Yamada
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Masahiro Yamada
[U-Boot] [PATCH 1/1] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Masahiro Yamada
[U-Boot] [PATCH v2 1/2] ARM: Move SYS_CACHELINE_SIZE over to Kconfig Masahiro Yamada
[U-Boot] [PATCH 0/4] tools: moveconfig: some more improvements Masahiro Yamada
[U-Boot] [PATCH 1/4] tools: moveconfig: remove document about deprecated error message Masahiro Yamada
[U-Boot] [PATCH 2/4] tools: moveconfig: use sets instead of lists for failed/suspicious boards Masahiro Yamada
[U-Boot] [PATCH 3/4] tools: moveconfig: warn loudly if moved option has no entry in Kconfig Masahiro Yamada
[U-Boot] [PATCH 4/4] tools: moveconfig: add --spl option to move options for SPL build Masahiro Yamada
[U-Boot] [PATCH 4/4] tools: moveconfig: add --spl option to move options for SPL build Masahiro Yamada
[U-Boot] [RFC PATCH v2 11/11] spl: Kconfig: Add CONFIG_SPL_TEXT_BASE as Kconfig option Masahiro Yamada
[U-Boot] [PATCH] common: show "Boot media" menu only for some TI and Freescale SoCs Masahiro Yamada
[U-Boot] [RFC PATCH v2 09/11] spl: Kconfig: Add SPL_<media>_SUPPORT as Kconfig option Masahiro Yamada
[U-Boot] [PATCH 02/13] spl: Kconfig: Add SPL_<media>_BOOT as Kconfig option Masahiro Yamada
[U-Boot] Should MMC drivers use CONFIG_BLK? Masahiro Yamada
[U-Boot] Should MMC drivers use CONFIG_BLK? Masahiro Yamada
[U-Boot] [PATCH 07/42] Kconfig: spl: Add SPL support options to Kconfig Masahiro Yamada
[U-Boot] [PATCH 32/42] Convert CONFIG_SPL_PINCTRL_SUPPORT to Kconfig Masahiro Yamada
[U-Boot] [PATCH 02/42] moveconfig: Add an option to commit changes Masahiro Yamada
[U-Boot] [PATCH 01/42] moveconfig: Add an option to skip prompts Masahiro Yamada
[U-Boot] [PATCH 06/42] Use separate options for TPL support Masahiro Yamada
[U-Boot] [PATCH 0/5] mmc: uniphier: migrate to CONFIG_DM_MMC_OPS and CONFIG_BLK Masahiro Yamada
[U-Boot] [PATCH 1/5] mmc: uniphier-sd: migrate to CONFIG_DM_MMC_OPS Masahiro Yamada
[U-Boot] [PATCH 2/5] mmc: uniphier-sd: move uniphier_sd_init() below Masahiro Yamada
[U-Boot] [PATCH 3/5] mmc: uniphier-sd: return error code if unsupported width is given Masahiro Yamada
[U-Boot] [PATCH 4/5] mmc: uniphier-sd: just return if already set to desired clock rate Masahiro Yamada
[U-Boot] [PATCH 5/5] mmc: uniphier-sd: migrate to CONFIG_BLK Masahiro Yamada
[U-Boot] [PATCH 0/6] mmc: sdhci: some fixes for CONFIG_BLK migration and macro renaming Masahiro Yamada
[U-Boot] [PATCH 1/6] mmc: sdhci: move sdhci_reset() call to sdhci_init() Masahiro Yamada
[U-Boot] [PATCH 2/6] mmc: sdhci: move error message to more relevant place Masahiro Yamada
[U-Boot] [PATCH 3/6] mmc: sdhci: move broken voltage quirk handling to sdhci_setup_cfg() Masahiro Yamada
[U-Boot] [PATCH 4/6] mmc: sdhci: move SDMA capability check to sdhci_setup_cfg() Masahiro Yamada
[U-Boot] [PATCH 5/6] mmc: sdhci: drop CONFIG_ from CONFIG_SDHCI_CMD_DEFAULT_TIME Masahiro Yamada
[U-Boot] [PATCH 6/6] mmc: sdhci: drop CONFIG_ from CONFIG_SDHCI_CMD_MAX_TIMEOUT Masahiro Yamada
[U-Boot] [PATCH v2 0/6] mmc: sdhci: some fixes for CONFIG_BLK migration and macro renaming Masahiro Yamada
[U-Boot] [PATCH v2 1/6] mmc: sdhci: move sdhci_reset() call to sdhci_init() Masahiro Yamada
[U-Boot] [PATCH v2 2/6] mmc: sdhci: move error message to more relevant place Masahiro Yamada
[U-Boot] [PATCH v2 3/6] mmc: sdhci: move broken voltage quirk handling to sdhci_setup_cfg() Masahiro Yamada
[U-Boot] [PATCH v2 4/6] mmc: sdhci: move SDMA capability check to sdhci_setup_cfg() Masahiro Yamada
[U-Boot] [PATCH v2 5/6] mmc: sdhci: drop CONFIG_ from CONFIG_SDHCI_CMD_DEFAULT_TIME Masahiro Yamada
[U-Boot] [PATCH v2 6/6] mmc: sdhci: drop CONFIG_ from CONFIG_SDHCI_CMD_MAX_TIMEOUT Masahiro Yamada
[U-Boot] [PATCH 0/3] ARM: uniphier: some more fixes for v2016.09 Masahiro Yamada
[U-Boot] [PATCH 1/3] ARM: uniphier: display revision of Micro Support Card 3.6.x kindly Masahiro Yamada
[U-Boot] [PATCH 2/3] ARM: uniphier: increase CONFIG_SYS_MALLOC_F_LEN for sLD3 Masahiro Yamada
[U-Boot] [PATCH 3/3] ARM: dts: uniphier: add u-boot, dm-pre-reloc to use eMMC boot on sLD3 Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: change UNIPHIER_SERIAL to default y option Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: support system reset functionality for PSCI Masahiro Yamada
[U-Boot] [PATCH 02/42] moveconfig: Add an option to commit changes Masahiro Yamada
[U-Boot] [PATCH] mmc: uniphier-sd: add static qualifiers to probe and remove callbacks Masahiro Yamada
[U-Boot] [PATCH 0/5] mmc: uniphier: migrate to CONFIG_DM_MMC_OPS and CONFIG_BLK Masahiro Yamada
[U-Boot] [PATCH 0/3] ARM: uniphier: some more fixes for v2016.09 Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: change UNIPHIER_SERIAL to default y option Masahiro Yamada
[U-Boot] [PATCH] ARM: uniphier: support system reset functionality for PSCI Masahiro Yamada
[U-Boot] pull request: u-boot-uniphier/master Masahiro Yamada
[U-Boot] [PATCH v2 21/44] Convert CONFIG_SPL_GPIO_SUPPORT to Kconfig Masahiro Yamada
[U-Boot] [PATCH v2 34/44] Convert CONFIG_SPL_PINCTRL_SUPPORT to Kconfig Masahiro Yamada
[U-Boot] [PATCH v2 02/44] moveconfig: Add an option to skip prompts Masahiro Yamada
[U-Boot] [PATCH v2 03/44] moveconfig: Add an option to commit changes Masahiro Yamada
[U-Boot] [PATCH 0/4] ARM: move ARMV7_PSCI and ARMV7_PSCI_NR_CPUS to Kconfig Masahiro Yamada
[U-Boot] [PATCH 1/4] ARM: tegra: remove wrong dependency on SPL_BUILD Masahiro Yamada
[U-Boot] [PATCH 2/4] ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI Masahiro Yamada
[U-Boot] [PATCH 3/4] ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig Masahiro Yamada
[U-Boot] [PATCH 4/4] ARM: armv7: move ARMV7_PSCI_NR_CPUS to Kconfig Masahiro Yamada
[U-Boot] [PATCH v2 0/4] ARM: move ARMV7_PSCI and ARMV7_PSCI_NR_CPUS to Kconfig Masahiro Yamada
[U-Boot] [PATCH v2 1/4] ARM: tegra: remove wrong dependency on SPL_BUILD Masahiro Yamada
[U-Boot] [PATCH v2 2/4] ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI Masahiro Yamada
[U-Boot] [PATCH v2 3/4] ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig Masahiro Yamada
[U-Boot] [PATCH v2 4/4] ARM: armv7: move ARMV7_PSCI_NR_CPUS to Kconfig Masahiro Yamada
[U-Boot] [PATCH] Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL Masahiro Yamada
[U-Boot] [PATCH] ARM: am335x: select DM_GPIO Masahiro Yamada
[U-Boot] [PATCH 1/4] ARM: tegra: remove wrong dependency on SPL_BUILD Masahiro Yamada
[U-Boot] [PATCH 1/4] ARM: tegra: remove wrong dependency on SPL_BUILD Masahiro Yamada
[U-Boot] what means "extra-" versus "obj-" in Makefiles Masahiro Yamada
[U-Boot] [PATCH v2 1/2] rk3399: add basic soc driver Kever Yang
[U-Boot] [PATCH v3 0/2] rk3399: add soc basic driver support Kever Yang
[U-Boot] [PATCH v3 1/2] rk3399: add basic soc driver Kever Yang
[U-Boot] [PATCH v3 2/2] mmc: rockchip_sdhci: add clock init Kever Yang
[U-Boot] [PATCH] configs: rk3399: add gpt and fs support Kever Yang
[U-Boot] [PATCH 0/3] rk3399: enable dwmmc controller for sdcard Kever Yang
[U-Boot] [PATCH 1/3] clock: rk3399: add support for dwmmc 400K Kever Yang
[U-Boot] [PATCH] configs: rk3399: add gpt and fs support Kever Yang
[U-Boot] [PATCH 2/3] dts: rk3399: enable dwmmc for sdcard Kever Yang
[U-Boot] [PATCH 3/3] config: rk3399: enable dwmmc controller Kever Yang
[U-Boot] [PATCH v2] cmd: gpt: fix the wrong size parse for the last partition Kever Yang
[U-Boot] [PATCH v2] configs: rk3399: add gpt and fs support Kever Yang
[U-Boot] [PATCH v2 0/3] rk3399: enable dwmmc controller for sdcard Kever Yang
[U-Boot] [PATCH v2 1/3] clock: rk3399: add support for dwmmc 400K Kever Yang
[U-Boot] [PATCH v2 2/3] dts: rk3399: enable dwmmc for sdcard Kever Yang
[U-Boot] [PATCH v2 3/3] config: rk3399: enable dwmmc controller Kever Yang
[U-Boot] [PATCH] rockchip: rk3399: update MAINTAINER file Kever Yang
[U-Boot] [PATCH 0/5] add pinctrl driver for rk3399 Kever Yang
[U-Boot] [PATCH 1/5] rk3399: syscon: add support for pmugrf Kever Yang
[U-Boot] [PATCH 2/5] pinctrl: add driver for rk3399 Kever Yang
[U-Boot] [PATCH 3/5] config: evb-rk3399: enable pinctrl driver Kever Yang
[U-Boot] [PATCH 4/5] rk3399: enable the pwm2/3 pinctrl in board init Kever Yang
[U-Boot] [PATCH 5/5] dts: rk3399: add pinctrl for sdmmc Kever Yang
[U-Boot] [PATCH 0/5] clean rkpwm driver Kever Yang
[U-Boot] [PATCH 1/5] clk: rk3399: add pmucru controller support Kever Yang
[U-Boot] [PATCH 2/5] clk: rk3288: add PWM clock get rate Kever Yang
[U-Boot] [PATCH 3/5] rk_pwm: use clock framework API to get module clock Kever Yang
[U-Boot] [PATCH 4/5] rk_pwm: remove grf setting code from driver Kever Yang
[U-Boot] [PATCH 5/5] rk3288: add arch_cpu_init for rk3288 Kever Yang
[U-Boot] [PATCH v2 0/5] add pinctrl driver for rk3399 Kever Yang
[U-Boot] [PATCH v2 1/5] rk3399: syscon: add support for pmugrf Kever Yang
[U-Boot] [PATCH v2 0/5] add pinctrl driver for rk3399 Kever Yang
[U-Boot] [RESEND PATCH v2 0/5] add pinctrl driver for rk3399 Kever Yang
[U-Boot] [RESEND PATCH v2 1/5] rk3399: syscon: add support for pmugrf Kever Yang
[U-Boot] [RESEND PATCH v2 2/5] pinctrl: add driver for rk3399 Kever Yang
[U-Boot] [RESEND PATCH v2 3/5] config: evb-rk3399: enable pinctrl driver Kever Yang
[U-Boot] [RESEND PATCH v2 4/5] rk3399: enable the pwm2/3 pinctrl in board init Kever Yang
[U-Boot] [RESEND PATCH v2 5/5] dts: rk3399: add pinctrl for sdmmc Kever Yang
[U-Boot] [PATCH 0/4] rk3399: enable dwc3 gadget and fastboot Kever Yang
[U-Boot] [PATCH 1/4] rk3399: add a empty "sys_proto.h" header file Kever Yang
[U-Boot] [PATCH 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH 4/4] config: rk3399: add support for dwc3 gadget Kever Yang
[U-Boot] [PATCH 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH 1/4] rk3399: add a empty "sys_proto.h" header file Kever Yang
[U-Boot] [PATCH 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH 0/7] rk3399: enable host controllers Kever Yang
[U-Boot] [PATCH 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Kever Yang
[U-Boot] [PATCH 2/7] rockchip: select DM_USB for rockchip SoC Kever Yang
[U-Boot] [PATCH 3/7] config: rk3399: add usb related configs Kever Yang
[U-Boot] [PATCH 4/7] dts: rk3399: add dwc3_typec node for rk3399 Kever Yang
[U-Boot] [PATCH 5/7] dts: rk3399-evb: add regulator-fixed for usb host vbus Kever Yang
[U-Boot] [PATCH 6/7] board: evb-rk3399: enable usb 2.0 host vbus power on board_init Kever Yang
[U-Boot] [PATCH 7/7] config: evb-rk3399: enable fixed regulator Kever Yang
[U-Boot] [PATCH 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Kever Yang
[U-Boot] [PATCH 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH v2 0/7] rk3399: enable host controllers Kever Yang
[U-Boot] [PATCH v2 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Kever Yang
[U-Boot] [PATCH v2 2/7] rockchip: select DM_USB for rockchip SoC Kever Yang
[U-Boot] [PATCH v2 3/7] config: rk3399: add usb related configs Kever Yang
[U-Boot] [PATCH v2 4/7] dts: rk3399: add dwc3_typec node for rk3399 Kever Yang
[U-Boot] [PATCH v2 5/7] dts: rk3399-evb: add regulator-fixed for usb host vbus Kever Yang
[U-Boot] [PATCH v2 6/7] board: evb-rk3399: enable usb 2.0 host vbus power on board_init Kever Yang
[U-Boot] [PATCH v2 7/7] config: evb-rk3399: enable fixed regulator Kever Yang
[U-Boot] [PATCH v2 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Kever Yang
[U-Boot] [PATCH v2 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Kever Yang
[U-Boot] [PATCH v2 0/4] rk3399: enable dwc3 gadget and fastboot Kever Yang
[U-Boot] [PATCH v2 1/4] rk3399: add a empty "sys_proto.h" header file Kever Yang
[U-Boot] [PATCH v2 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH v2 4/4] config: rk3399: add support for dwc3 gadget Kever Yang
[U-Boot] [PATCH v3 0/7] rk3399: enable host controllers Kever Yang
[U-Boot] [PATCH v3 1/7] usb: xhci-rockchip: add rockchip dwc3 controller driver Kever Yang
[U-Boot] [PATCH v3 2/7] rockchip: select DM_USB for rockchip SoC Kever Yang
[U-Boot] [PATCH v3 3/7] config: rk3399: add usb related configs Kever Yang
[U-Boot] [PATCH v3 4/7] dts: rk3399: add dwc3_typec node for rk3399 Kever Yang
[U-Boot] [PATCH v3 5/7] dts: rk3399-evb: add regulator-fixed for usb host vbus Kever Yang
[U-Boot] [PATCH v3 6/7] board: evb-rk3399: enable usb 2.0 host vbus power on board_init Kever Yang
[U-Boot] [PATCH v3 7/7] config: evb-rk3399: enable fixed regulator Kever Yang
[U-Boot] [PATCH v2 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH v2 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH v2 4/4] config: rk3399: add support for dwc3 gadget Kever Yang
[U-Boot] [PATCH 0/7] add pwm regulator driver Kever Yang
[U-Boot] [PATCH 1/7] rockchip: rk3399: update PPLL and pmu_pclk frequency Kever Yang
[U-Boot] [PATCH 2/7] rockchip: rkpwm: fix the register sequence Kever Yang
[U-Boot] [PATCH 3/7] power: regulator: add pwm regulator Kever Yang
[U-Boot] [PATCH 4/7] rockchip: evb_rk3399: init vdd_center regulator Kever Yang
[U-Boot] [PATCH 5/7] Kconfig: rockchip: enable DM_PWM and DM_REGULATOR Kever Yang
[U-Boot] [PATCH 6/7] dts: evb-rk3399: add init voltage node for vdd-center Kever Yang
[U-Boot] [PATCH 7/7] config: evb-rk3399: enable pwm regulator Kever Yang
[U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH v3 0/4] rk3399: enable dwc3 gadget and fastboot Kever Yang
[U-Boot] [PATCH v3 1/4] rk3399: add a empty "sys_proto.h" header file Kever Yang
[U-Boot] [PATCH v3 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
[U-Boot] [PATCH v3 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Kever Yang
[U-Boot] [PATCH v3 4/4] config: rk3399: add support for dwc3 gadget Kever Yang
[U-Boot] [RESEND PATCH v3] dm: atmel: Add driver model support for the ehci driver Wenyou Yang
[U-Boot] [PATCH v10] mmc: atmel_sdhci: Convert to the driver model support Wenyou Yang
[U-Boot] [PATCH v11] mmc: atmel_sdhci: Convert to the driver model support Wenyou Yang
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Wenyou Yang
[U-Boot] [PATCH] sf: fix sf probe Wenyou Yang
[U-Boot] [PATCH v8] dm: at91: Add driver model support for the spi driver Wenyou Yang
[U-Boot] [PATCH v1] i2c: at91_i2c: Fix the wrong include file Wenyou Yang
[U-Boot] [PATCH v1 0/2] clk: at91: Fix the wrong used class ID Wenyou Yang
[U-Boot] [PATCH v1 1/2] clk: at91: Fix at91-pmc and at91-sckc's class ID Wenyou Yang
[U-Boot] [PATCH v1 2/2] clk: at91: Add .ops callback for clk_generic Wenyou Yang
[U-Boot] [PATCH v1] mmc: mmc-uclass: Add mmc_init() in mmc preinit phrase Wenyou Yang
[U-Boot] [PATCH v1 0/2] serial: atmel_usart: Support to enable an early debug UART Wenyou Yang
[U-Boot] [PATCH v1 1/2] serial: Kconfig: Add ATMEL_USART option Wenyou Yang
[U-Boot] [PATCH v1 2/2] serial: atmel_usart: Support enable an early debug UART Wenyou Yang
[U-Boot] [PATCH v1 0/4] board: sama5d2_xplained: Convert to use device tree and drivers with DM Wenyou Yang
[U-Boot] [PATCH v1 1/4] board: sama5d2_xplained: Move config options to defconfigs Wenyou Yang
[U-Boot] [PATCH v1 2/4] board: sama5d2_xplained: Clean up code Wenyou Yang
[U-Boot] [PATCH v1 3/4] board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC Wenyou Yang
[U-Boot] [PATCH v1 4/4] board: sama5d2_xplained: Enable an early debug UART Wenyou Yang
[U-Boot] [PATCH] armv8: ls2080a/ls1043a/ls1012a: enable support for booti Stuart Yoder
[U-Boot] [PATCH 0/5] sh4: fixes to SH7751 PCI host controller Vladimir Zapolskiy
[U-Boot] [PATCH 1/5] pci: sh7751: fix up PCI I/O space address Vladimir Zapolskiy
[U-Boot] [PATCH 2/5] pci: sh7751: map PCI memory space into SDRAM Vladimir Zapolskiy
[U-Boot] [PATCH 3/5] sh4: remove __io config options from r2dplus and r7780mp boards Vladimir Zapolskiy
[U-Boot] [PATCH 4/5] r2dplus: use P1 area space for text base and PCI system memory Vladimir Zapolskiy
[U-Boot] [PATCH 5/5] r2dplus: select rtl8139 driver in defconfig Vladimir Zapolskiy
[U-Boot] [PATCH] common: sh: add necessary define bits to board_f Vladimir Zapolskiy
[U-Boot] [PATCH 00/12] sh: change arch and boards code to generic board Vladimir Zapolskiy
[U-Boot] [PATCH 01/12] sh4: use single u-boot linker script for all boards Vladimir Zapolskiy
[U-Boot] [PATCH 02/12] sh: place board lowlevel_init code in the beginning of .text Vladimir Zapolskiy
[U-Boot] [PATCH 03/12] sh: define entry point and reloc_dst inside a linker script Vladimir Zapolskiy
[U-Boot] [PATCH 04/12] sh: add MEMORY command to a shared linker script Vladimir Zapolskiy
[U-Boot] [PATCH 05/12] sh: remove undefined DEBUG preprocessor token from board config files Vladimir Zapolskiy
[U-Boot] [PATCH 06/12] sh: define CONFIG_DISPLAY_BOARDINFO to print board information Vladimir Zapolskiy
[U-Boot] [PATCH 07/12] sh: add common dram_init() function for all boards Vladimir Zapolskiy
[U-Boot] [PATCH 08/12] sh: add shared relocate_code() function and call board_init_r() Vladimir Zapolskiy
[U-Boot] [PATCH 09/12] sh4: fix start.S by calling board_init_f() after first code relocation Vladimir Zapolskiy
[U-Boot] [PATCH 10/12] sh: share the correct version of start.S among all cpus Vladimir Zapolskiy
[U-Boot] [PATCH 11/12] sh: generate position independent code for all platforms Vladimir Zapolskiy
[U-Boot] [PATCH 12/12] r2dplus: fixup CONFIG_SYS_TEXT_BASE to account arch/sh changes Vladimir Zapolskiy
[U-Boot] [PATCH 0/6] sh4: fix and simplify cache manipulation Vladimir Zapolskiy
[U-Boot] [PATCH 1/6] sh4: cache: correct dcache flush to invalidate with write-back Vladimir Zapolskiy
[U-Boot] [PATCH 2/6] sh4: cache: correct flush_cache() to writeback and invalidate Vladimir Zapolskiy
[U-Boot] [PATCH 3/6] sh3: remove unused cache.c file from being built Vladimir Zapolskiy
[U-Boot] [PATCH 4/6] sh: cache use jump_to_P2() and back_to_P1() from asm/system.h Vladimir Zapolskiy
[U-Boot] [PATCH 5/6] sh: cache: don't modify CCR from P1 area Vladimir Zapolskiy
[U-Boot] [PATCH 6/6] sh4: cache: move exported cache manipulation functions into cache.c Vladimir Zapolskiy
[U-Boot] [PATCH 00/12] sh: change arch and boards code to generic board Vladimir Zapolskiy
[U-Boot] Ethernet on FDI3250 board Vladimir Zapolskiy
[U-Boot] [PATCH 1/2] sunxi: add proper device tree for iNet D978 rev2 boards Icenowy Zheng
[U-Boot] [PATCH 2/2] sunxi: Add iNet D978 rev2 defconfig Icenowy Zheng
[U-Boot] [PATCH 1/2] sunxi: add proper device tree for iNet D978 rev2 boards Icenowy Zheng
[U-Boot] [PATCH 1/2] sunxi: add proper device tree for iNet D978 rev2 boards Icenowy Zheng
[U-Boot] [PATCH v2 1/2] sunxi: add proper device tree for iNet D978 rev2 boards Icenowy Zheng
[U-Boot] [PATCH v2 2/2] sunxi: Add iNet D978 rev2 defconfig Icenowy Zheng
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Marcel Ziswiler
[U-Boot] [PATCH] net: asix: Fix ASIX 88772B with driver model Marcel Ziswiler
[U-Boot] [PATCH] Please pull u-boot-mmc andreas at biessmann.de
[U-Boot] u-boot efi scott.iveland at calix.com
[U-Boot] Prospective contributer nilan chamara
[U-Boot] Prospective contributer nilan chamara
[U-Boot] [PATCH] ARM: tegra: Add support for TK1-SOM board from Colorado Engineering Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH 1/2] rtl8169: fix cache misalignment message on transmit. Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH 2/2] Fix cache misalignment after network load operations Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH] ARM: tegra: Add support for TK1-SOM board from Colorado Engineering Peter.Chubb at data61.csiro.au
[U-Boot] [PATCH v2] ARM: tegra: Add support for TK1-SOM board from Colorado Engineering Peter.Chubb at data61.csiro.au
[U-Boot] Nvidia Trega Tk1 - /cpus/cpu at 0 missing clock-frequency property vinoth eswaran
[U-Boot] CPU Clock frequency at boot time - Nvidia Jetson TK1 vinoth eswaran
[U-Boot] CPU Clock frequency at boot time - Nvidia Jetson TK1 vinoth eswaran
[U-Boot] CPU Clock frequency at boot time - Nvidia Jetson TK1 vinoth eswaran
[U-Boot] CPU Clock frequency at boot time - Nvidia Jetson TK1 vinoth eswaran
[U-Boot] [PATCH v1] ppc4xx: Fix platform support dirk.eibach at gdsys.cc
[U-Boot] [PATCH] omap3logic: Fix PBIAS Bug aford173 at gmail.com
[U-Boot] A64 fastboot, faster way to compile/test jonsmirl at gmail.com
[U-Boot] A64 fastboot, faster way to compile/test jonsmirl at gmail.com
[U-Boot] [UBOOT PATCH 0/4] Add LS1 PSCI system suspend macro.wave.z at gmail.com
[U-Boot] [UBOOT PATCH 1/4] armv7: psci: make v7_flush_dcache_all public for all psci code macro.wave.z at gmail.com
[U-Boot] [UBOOT PATCH 2/4] nxp: ls102xa: add registers definition for system sleep macro.wave.z at gmail.com
[U-Boot] [UBOOT PATCH 3/4] nxp: ls102xa: add EPU Finite State Machine macro.wave.z at gmail.com
[U-Boot] [UBOOT PATCH 4/4] nxp: ls102xa: add LS1 PSCI system suspend macro.wave.z at gmail.com
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model maitysanchayan at gmail.com
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model maitysanchayan at gmail.com
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model maitysanchayan at gmail.com
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model maitysanchayan at gmail.com
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model maitysanchayan at gmail.com
[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model maitysanchayan at gmail.com
[U-Boot] [PATCH v2 0/4] Migrate Vybrid USB driver to driver model maitysanchayan at gmail.com
[U-Boot] Regarding source code of u-boot kirti kumbhar
[U-Boot] [PATCH v3 0/3] Modifies the erratum A006261 according to endianness y at lvd5587.freescale.com
[U-Boot] [PATCH v3 1/3] mpc85xx: powerpc: usb: Modified the erratum A006261 according to endianness y at lvd5587.freescale.com
[U-Boot] [PATCH v3 2/3] mpc85xx: powerpc: usb: Enable Usb phy initialisation settings for P1010 y at lvd5587.freescale.com
[U-Boot] [PATCH v3 3/3] mpc85xx: powerpc: usb: Update the list of Socs afftected by erratum A006261 y at lvd5587.freescale.com
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Wenyou.Yang at microchip.com
[U-Boot] [RFC PATCH] net: macb: Fix build error for CONFIG_DM_ETH enabled Wenyou.Yang at microchip.com
[U-Boot] [PATCH v5] clk: at91: Add clock driver Wenyou.Yang at microchip.com
[U-Boot] [PATCH v7 0/4] ARM: AT91: Add AT91 PIO4 pinctrl driver and gpio driver with DM Wenyou.Yang at microchip.com
[U-Boot] [PATCH v10] mmc: atmel_sdhci: Convert to the driver model support Wenyou.Yang at microchip.com
[U-Boot] [PATCH v10] mmc: atmel_sdhci: Convert to the driver model support Wenyou.Yang at microchip.com
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Wenyou.Yang at microchip.com
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Wenyou.Yang at microchip.com
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Wenyou.Yang at microchip.com
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Wenyou.Yang at microchip.com
[U-Boot] [PATCH v7] dm: at91: Add driver model support for the spi driver Wenyou.Yang at microchip.com
[U-Boot] [PATCH v1] clk: clk-uclass: Check ops pointer before use it Wenyou.Yang at microchip.com
[U-Boot] [PATCH 1/2] armv8: fsl-lsch2: adjust sata parameter yuantian.tang at nxp.com
[U-Boot] [PATCH 2/2] armv8: fsl-lsch2: enable snoopable sata read and write yuantian.tang at nxp.com
[U-Boot] OpenSSL/evp.h fatal error pc.ramachandra
[U-Boot] *** Your dtc is too old, please upgrade to dtc 1.4 or newer make: *** [checkdtc] Error 1 pc.ramachandra
[U-Boot] *** Your dtc is too old, please upgrade to dtc 1.4 or newer make: *** [checkdtc] Error 1 pc.ramachandra
[U-Boot] Permission denied make: *** [core-dependencies] Error 126 in Buildroot-2015.08.1 pc.ramachandra
[U-Boot] [PATCH] ARM: board: cm_fx6: fix mtd partition fixup christopher.spinrath at rwth-aachen.de
[U-Boot] [PATCH] pxe: Fix pxe boot with FIT image Wenbin song
[U-Boot] [PATCH 2/3] arm/PSCI: Fixed the backward compatiblity issue york sun
[U-Boot] [PATCH 2/3] arm/PSCI: Fixed the backward compatiblity issue york sun
[U-Boot] [PATCH 1/2] net: fm: fix spi flash probe for using driver model york sun
[U-Boot] [PATCH] powerpc/mpc85xx: Update erratum workaround for A006379 york sun
[U-Boot] [PATCH v2] driver: spi: fsl-qspi: remove compile Warnings york sun
[U-Boot] [PATCH] crypto/fsl: Update blob cmd to accept 64bit addresses york sun
[U-Boot] [PATCH] board: ls1012aqds: Update LBMAP_MASK and RST_CTL_RESET york sun
[U-Boot] [PATCH 1/2] armv8: ls1012a: Enable DDR row-bank-column decoding york sun
[U-Boot] [PATCH 2/2] armv8: ls1012a: Update Refresh cycle for DDR york sun
[U-Boot] [PATCH] board/freescale: Update MAINTAINERS files york sun
[U-Boot] [PATCH] driver/ddr/fsl: Fix timing_cfg_2 york sun
[U-Boot] [PATCH 1/3] arm/PSCI: Removed unused code york sun
[U-Boot] [PATCH 2/3] arm/PSCI: Fixed the backward compatiblity issue york sun
[U-Boot] [PATCH 3/3] arm/PSCI: Added support for creating ARMv7 PSCI version 1.0 DT node york sun
[U-Boot] [PATCH] ARMv8/fsl-ppa: Consolidate PPA image stored-media flag for XIP york sun
[U-Boot] [PATCH] armv8: ls1043a: add pxe commands york sun
[U-Boot] Please pull u-boot-fsl-qoriq master york sun
[U-Boot] [PATCH] powerpc/86xx: Increase boot map size to 256 MiB york sun
[U-Boot] Please pull u-boot-mpc86xx master york sun
[U-Boot] [Resend] Please pull u-boot-mpc86xx master york sun
[U-Boot] [PATCH] pxe: Fix pxe boot with FIT image york sun
[U-Boot] [PATCH] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS york sun
[U-Boot] [PATCH][v2] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS york sun
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection york sun
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection york sun
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection york sun
[U-Boot] [PATCH 1/2] driver/ddr/fsl: Add general MMDC driver york sun
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection york sun
[U-Boot] [PATCH 1/2] driver/ddr/fsl: Add general MMDC driver york sun
[U-Boot] [PATCH v3 00/27] spi/sf: Updates on flash detection york sun
[U-Boot] [PATCH] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller york sun
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests york sun
[U-Boot] [PATCH 1/2 v2] driver/ddr/fsl: Add general MMDC driver york sun
[U-Boot] [u-boot-release] [PATCH v3 1/3] mpc85xx: powerpc: usb: Modified the erratum A006261 according to endianness york sun
[U-Boot] [PATCH v3 2/3] mpc85xx: powerpc: usb: Enable Usb phy initialisation settings for P1010 york sun
[U-Boot] [PATCH v3 3/3] mpc85xx: powerpc: usb: Update the list of Socs afftected by erratum A006261 york sun
[U-Boot] [PATCH v3 0/3] Modifies the erratum A006261 according to endianness york sun
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests york sun
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests york sun
[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests york sun
[U-Boot] [PATCH 1/8] drivers/ddr/fsl: add DEBUG_38 york sun
[U-Boot] [PATCH 3/8] armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latency york sun
[U-Boot] [PATCH 5/8] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app york sun
[U-Boot] [PATCH 7/8] armv8: ls1046a: disable SATA ECC in DCSR york sun
[U-Boot] [PATCH 5/8] armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone app york sun
[U-Boot] [PATCH] pxe: Fix pxe boot with FIT image york sun
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions york sun
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions york sun
[U-Boot] [PATCH] ARM: Rework and correct barrier definitions york sun
[U-Boot] [PATCH] pbl: use "wait" command instead of "flush" command york sun
[U-Boot] [u-boot-release] [PATCH] fsl_sfp : Modify macros as per changes in SFP v3.4 york sun
[U-Boot] [Patch v2 7/7] armv8: ls1046ardb: Add LS1046ARDB board support york sun
[U-Boot] Raspberry PI u-boot dh at synoia.com
[U-Boot] u-boot - raspberry pi dh at synoia.com
[U-Boot] u-boot - raspberry pi dh at synoia.com
[U-Boot] u-boot - raspberry pi dh at synoia.com
[U-Boot] U-Boot Nor Flash Page Read Mode yyurtcan
[U-Boot] p4080ds UPM Mode Enable yyurtcan
[U-Boot] p4080ds UPM Mode Enable yyurtcan
[U-Boot] P4080DS ELBC UPM MODE yyurtcan
[U-Boot] UPM Configuration in P4080DS yyurtcan
[U-Boot] [PATCH] rockchip: rk3288-firefly: enable boot from eMMC 陈豪
[U-Boot] [PATCH] rockchip: rk3288-firefly: enable boot from eMMC 陈豪
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode 陈豪
[U-Boot] [PATCH 1/3] mmc: dw_mmc: change the read/write order under fifo mode 陈豪

Last message date: Wed Aug 31 23:43:00 CEST 2016
Archived on: Mon Sep 5 17:53:37 CEST 2016

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).