[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model
Lukasz Majewski
l.majewski at samsung.com
Tue Aug 9 15:20:58 CEST 2016
Hi maitysanchayan at gmail.com,
> Hello,
>
> Adding Lukasz's second mail ID to cc
>
> On 16-08-08 11:45:35, maitysanchayan at gmail.com wrote:
> > Hello,
> >
> > On 16-08-03 17:13:11, Marek Vasut wrote:
> > > On 08/03/2016 01:58 PM, Sanchayan Maity wrote:
> > > > Add driver model support for Vybrid USB driver.
> > > >
> > > > Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
> > >
> > > CCing Lukasz.
> > >
> > > > ---
> > > > Hello,
> > > >
> > > > I am trying to migrate the Vybrid USB driver to driver model.
> > > > Patches are based on top of uboot master branch. With this
> > > > implementation, host works perfectly fine on both USB ports
> > > > but I have problems using it in client mode.
> > > >
> > > > I tried DFU to test client mode and I get the following
> > > >
> > > > Colibri VFxx # version
> > > >
> > > > U-Boot 2016.09-rc1-00235-g4e8c122 (Aug 03 2016 - 17:07:48 +0530)
> > > > arm-linux-gnueabihf-gcc (Linaro GCC 5.2-2015.11-2) 5.2.1
> > > > 20151005 GNU ld (GNU Binutils) 2.25.0 Linaro 2015_10
> > > > Colibri VFxx # dfu 0 nand 4
> > > > using id 'nand0,0'
> > > > using id 'nand0,1'
> > > > using id 'nand0,3'
> > > > g_dnl_register: failed!, error: -19
> > > > data abort
> > > > pc : [<8ff80f18>] lr : [<8ff612a9>]
> > > > reloc pc : [<3f431f18>] lr : [<3f4122a9>]
> > > > sp : 8fd15000 ip : 00000000 fp : 00002710
> > > > r10: 8ffb50cc r9 : 8fd16ee8 r8 : 8ffbc574
> > > > r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000
> > > > r3 : 0000f4b9 r2 : 80000000 r1 : 00000001 r0 : 00000000
> > > > Flags: nZCv IRQs off FIQs off Mode SVC_32
> > > > Resetting CPU ...
> > > >
> > > > resetting ...
Patch for fixing this has been already posted by you. Thanks :-)
> >
> > FWIW here is output with DEBUG enabled in uclass.c
> >
> > when testing with DFU:
> >
> > uclass_find_device_by_seq: 1 0
> > - -1 -1
> > - -1 -1
> > - not found
> > g_dnl_register: failed!, error: -19
> > data abort
> > pc : [<8ff80fb0>] lr : [<8ff612a9>]
> > reloc pc : [<3f431fb0>] lr : [<3f4122a9>]
> > sp : 8fd15000 ip : 00000000 fp : 00002710
> > r10: 8ffb5274 r9 : 8fd16ee8 r8 : 8ffbc714
> > r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000
> > r3 : 0000f4b9 r2 : 80000000 r1 : 00000001 r0 : 00000000
> > Flags: nZCv IRQs off FIQs off Mode SVC_32
> > Resetting CPU ...
> >
> > resetting ...
> >
> > When testing host mode with usb start
> >
> > Colibri VFxx # usb start
> > starting USB...
> > USB0: uclass_find_device_by_seq: 0 -1
> > uclass_find_device_by_seq: 0 0
> > - -1 -1
> > - -1 -1
> > - not found
> > USB EHCI 1.00
> > USB1: uclass_find_device_by_seq: 0 -1
> > uclass_find_device_by_seq: 0 0
> > - -1 0
> > - found
> > uclass_find_device_by_seq: 0 1
> > - -1 0
> > - -1 1
> > - found
> > uclass_find_device_by_seq: 0 2
> > - -1 0
> > - -1 1
> > - -1 -1
> > - not found
> > uclass_find_device_by_seq: 0 -1
> > uclass_find_device_by_seq: 0 0
> > - -1 0
> > - found
> > uclass_find_device_by_seq: 0 1
> > - -1 0
> > - -1 -1
> > - not found
> > USB EHCI 1.00
> > scanning bus 0 for devices... uclass_find_device_by_seq: 0 -1
> > uclass_find_device_by_seq: 0 0
> > - -1 -1
> > - not found
> > uclass_find_device_by_seq: 0 -1
> > uclass_find_device_by_seq: 0 0
> > - -1 -1
> > - not found
> > 2 USB Device(s) found
> > scanning bus 1 for devices... uclass_find_device_by_seq: 0 -1
> > uclass_find_device_by_seq: 0 0
> > - -1 0
> > - found
> > uclass_find_device_by_seq: 0 1
> > - -1 0
> > - -1 -1
> > - not found
> > uclass_find_device_by_seq: 0 -1
> > uclass_find_device_by_seq: 0 0
> > - -1 0
> > - found
> > uclass_find_device_by_seq: 0 1
> > - -1 0
> > - -1 1
> > - found
> > uclass_find_device_by_seq: 0 2
> > - -1 0
> > - -1 1
> > - -1 -1
> > - not found
> > 2 USB Device(s) found
> >
> > Regards,
> > Sanchayan.
> >
> > > >
> > > > It seems to return ENODEV from usb_setup_ehci_gadget after
> > > > calling uclass_find_device_by_seq. I am not sure what I am
> > > > missing in the current implementation. Can someone point me in
> > > > the correct direction? Since host works on both ports I would
> > > > assume the device tree nodes are correct.
Please do not mix host and device controllers. Those are two disjoint
drivers.
What I can see, is that usb_gadget_register_driver() calls
usb_setup_ehci_gadget(). when DM is supported.
It then calls uclass_find_device_by_seq(), which tries to find a
device (probably ci_udc? ) which is not supported in DM.
> > > >
> > > > Tried to look in documentation and usb-info.txt mentions that
> > > > gadget framework does not use driver model.
Unfortunately, it hasn't been converted to DM yet.
>>> Does this imply I
> > > > cannot use any usb gadget functionality if I am using USB DM?
I didn't encounter such problem yet.
However, I think that it would be possible to make some "glue" code to
try to connect both host and device controllers (which would be some
kind of a hack).
I assume (from log) that you work on calibri-vf board. Is gadget (and
CI-UDC) working properly when DM is not enabled?
> > > > However the function usb_gadget_register_driver in ci_udc.c
> > > > does have a CONFIG_DM_USB and calls into usb_setup_ehci_gadget
> > > > which is in usb-uclass.c.
The only idea which come to my mind is to hack the
usb_gadget_register_driver() function to work with (for usb host) and
without (for usb gadget) DM. It might require some code copying,
though.
>
> @Lukasz
> Can you comment?
>
> Regards,
> Sanchayan.
>
> > > >
> > > > Regards,
> > > > Sanchayan.
> > > > ---
> > > > drivers/usb/host/ehci-vf.c | 123
> > > > ++++++++++++++++++++++++++++++++++++++++++--- 1 file changed,
> > > > 117 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/drivers/usb/host/ehci-vf.c
> > > > b/drivers/usb/host/ehci-vf.c index 61789dd..8c5c593 100644
> > > > --- a/drivers/usb/host/ehci-vf.c
> > > > +++ b/drivers/usb/host/ehci-vf.c
> > > > @@ -8,6 +8,7 @@
> > > > */
> > > >
> > > > #include <common.h>
> > > > +#include <dm.h>
> > > > #include <usb.h>
> > > > #include <errno.h>
> > > > #include <linux/compiler.h>
> > > > @@ -131,6 +132,24 @@ int __weak board_ehci_hcd_init(int port)
> > > > return 0;
> > > > }
> > > >
> > > > +int ehci_vf_common_init(struct usb_ehci *ehci, int index)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + /* Do board specific initialisation */
> > > > + ret = board_ehci_hcd_init(index);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + usb_power_config(index);
> > > > + usb_oc_config(index);
> > > > + usb_internal_phy_clock_gate(index);
> > > > + usb_phy_enable(index, ehci);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +#ifndef CONFIG_DM_USB
> > > > int ehci_hcd_init(int index, enum usb_init_type init,
> > > > struct ehci_hccr **hccr, struct ehci_hcor
> > > > **hcor) {
> > > > @@ -143,12 +162,9 @@ int ehci_hcd_init(int index, enum
> > > > usb_init_type init, ehci = (struct usb_ehci
> > > > *)nc_reg_bases[index];
> > > > /* Do board specific initialisation */
> > > > - board_ehci_hcd_init(index);
> > > > -
> > > > - usb_power_config(index);
> > > > - usb_oc_config(index);
> > > > - usb_internal_phy_clock_gate(index);
> > > > - usb_phy_enable(index, ehci);
> > > > + ret = ehci_vf_common_init(index);
> > > > + if (ret)
> > > > + return ret;
> > > >
> > > > *hccr = (struct ehci_hccr
> > > > *)((uint32_t)&ehci->caplength); *hcor = (struct ehci_hcor
> > > > *)((uint32_t)*hccr + @@ -175,3 +191,98 @@ int ehci_hcd_stop(int
> > > > index) {
> > > > return 0;
> > > > }
> > > > +#else
> > > > +struct ehci_vf_priv_data {
> > > > + struct ehci_ctrl ctrl;
> > > > + struct usb_ehci *ehci;
> > > > + enum usb_init_type init_type;
> > > > + int portnr;
> > > > +};
> > > > +
> > > > +static int vf_init_after_reset(struct ehci_ctrl *dev)
> > > > +{
> > > > + struct ehci_vf_priv_data *priv = dev->priv;
> > > > + enum usb_init_type type = priv->init_type;
> > > > + struct usb_ehci *ehci = priv->ehci;
> > > > + int ret;
> > > > +
> > > > + ret = ehci_vf_common_init(priv->ehci, priv->portnr);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + if (type == USB_INIT_DEVICE)
> > > > + return 0;
> > > > +
> > > > + setbits_le32(&ehci->usbmode, CM_HOST);
> > > > + writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
> > > > + setbits_le32(&ehci->portsc, USB_EN);
> > > > +
> > > > + mdelay(10);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct ehci_ops vf_ehci_ops = {
> > > > + .init_after_reset = vf_init_after_reset
> > > > +};
> > > > +
> > > > +static int ehci_usb_probe(struct udevice *dev)
> > > > +{
> > > > + struct usb_platdata *plat = dev_get_platdata(dev);
> > > > + struct usb_ehci *ehci = (struct usb_ehci
> > > > *)dev_get_addr(dev);
> > > > + struct ehci_vf_priv_data *priv = dev_get_priv(dev);
> > > > + struct ehci_hccr *hccr;
> > > > + struct ehci_hcor *hcor;
> > > > + int ret;
> > > > +
> > > > + priv->ehci = ehci;
> > > > + priv->portnr = dev->seq;
> > > > + priv->init_type = plat->init_type;
> > > > +
> > > > + ret = ehci_vf_common_init(ehci, priv->portnr);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + if (priv->init_type == USB_INIT_HOST) {
> > > > + setbits_le32(&ehci->usbmode, CM_HOST);
> > > > + writel((PORT_PTS_UTMI | PORT_PTS_PTW),
> > > > &ehci->portsc);
> > > > + setbits_le32(&ehci->portsc, USB_EN);
> > > > + }
> > > > +
> > > > + mdelay(10);
> > > > +
> > > > + hccr = (struct ehci_hccr
> > > > *)((uint32_t)&ehci->caplength);
> > > > + hcor = (struct ehci_hcor *)((uint32_t)hccr +
> > > > +
> > > > HC_LENGTH(ehci_readl(&hccr->cr_capbase))); +
> > > > + return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0,
> > > > plat->init_type); +}
> > > > +
> > > > +static int ehci_usb_remove(struct udevice *dev)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + ret = ehci_deregister(dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct udevice_id vf_usb_ids[] = {
> > > > + { .compatible = "fsl,vf610-usb" },
> > > > + { }
> > > > +};
> > > > +
> > > > +U_BOOT_DRIVER(usb_ehci) = {
> > > > + .name = "ehci_vf",
> > > > + .id = UCLASS_USB,
> > > > + .of_match = vf_usb_ids,
> > > > + .probe = ehci_usb_probe,
> > > > + .remove = ehci_usb_remove,
> > > > + .ops = &ehci_usb_ops,
> > > > + .platdata_auto_alloc_size = sizeof(struct
> > > > usb_platdata),
> > > > + .priv_auto_alloc_size = sizeof(struct
> > > > ehci_vf_priv_data),
> > > > + .flags = DM_FLAG_ALLOC_PRIV_DMA,
> > > > +};
> > > > +#endif
> > > >
> > >
> > >
> > > --
> > > Best regards,
> > > Marek Vasut
>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the U-Boot
mailing list