[U-Boot] [PATCH 1/6] mmc: sdhci: move sdhci_reset() call to sdhci_init()

Masahiro Yamada yamada.masahiro at socionext.com
Thu Aug 25 09:04:18 CEST 2016


If CONFIG_BLK is enabled, add_sdhci() is never called.
So, sdhci_reset() is not called, either.  This is a problem for
my board as it needs the reset to start from a sane state.

Move the add_sdhci() call to sdhci_init(), which is visited
by both of the with/without CONFIG_BLK cases.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 drivers/mmc/sdhci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 7ddb549..91cc8b2 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -451,6 +451,8 @@ static int sdhci_init(struct mmc *mmc)
 {
 	struct sdhci_host *host = mmc->priv;
 
+	sdhci_reset(host, SDHCI_RESET_ALL);
+
 	if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
 		aligned_buffer = memalign(8, 512*1024);
 		if (!aligned_buffer) {
@@ -595,8 +597,6 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk)
 	if (host->quirks & SDHCI_QUIRK_BROKEN_VOLTAGE)
 		host->cfg.voltages |= host->voltages;
 
-	sdhci_reset(host, SDHCI_RESET_ALL);
-
 	host->mmc = mmc_create(&host->cfg, host);
 	if (host->mmc == NULL) {
 		printf("%s: mmc create fail!\n", __func__);
-- 
1.9.1



More information about the U-Boot mailing list