[U-Boot] [PATCH 06/21] imx: timer: update gpt driver for i.MX6ULL

[Stefano Babic]

On 11/08/2016 08:02, Peng Fan wrote:
> The i.MX6ULL's GPT supportting taking OSC as clock source.
> Add i.MX6ULL support.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> Signed-off-by: Ye Li <ye.li at nxp.com>
> Cc: Stefano Babic <sbabic at denx.de>
> ---
>  arch/arm/imx-common/timer.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
> index a01590c..fb1b693 100644
> --- a/arch/arm/imx-common/timer.c
> +++ b/arch/arm/imx-common/timer.c
> @@ -44,7 +44,8 @@ static inline int gpt_has_clk_source_osc(void)
>  {
>  #if defined(CONFIG_MX6)
>  	if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
> -	    is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul())
> +	    is_mx6dqp() || is_mx6sdl() || is_mx6sx() || is_mx6ul() ||
> +	    is_mx6ull())
>  		return 1;
>  
>  	return 0;
> @@ -83,8 +84,8 @@ int timer_init(void)
>  	if (gpt_has_clk_source_osc()) {
>  		i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
>  
> -		/* For DL/S, SX, UL, set 24Mhz OSC Enable bit and prescaler */
> -		if (is_mx6sdl() || is_mx6sx() || is_mx6ul()) {
> +		/* For DL/S, SX, UL, ULL set 24Mhz OSC Enable bit and prescaler */
> +		if (is_mx6sdl() || is_mx6sx() || is_mx6ul() || is_mx6ull()) {
>  			i |= GPTCR_24MEN;
>  
>  			/* Produce 3Mhz clock */
> 
Reviewed-by: Stefano Babic <sbabic at denx.de>

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================