[U-Boot] [PATCH 06/42] Use separate options for TPL support
Simon Glass
sjg at chromium.org
Wed Aug 24 18:51:50 CEST 2016
At present TPL uses the same options as SPL support. In a few cases the board
config enables or disables the SPL options depending on whether
CONFIG_TPL_BUILD is defined.
With the move to Kconfig, options are determined for the whole build and
(without a hack like an #undef in a header file) cannot be controlled in this
way.
Create new TPL options for these and update users. This will allow Kconfig
conversion to proceed for these boards.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
common/Makefile | 12 +++++++++++-
drivers/Makefile | 16 +++++++++++++++-
include/common.h | 15 +++++++++------
include/configs/C29XPCIE.h | 16 ++++++++--------
include/configs/P1010RDB.h | 14 +++++++-------
include/configs/P1022DS.h | 14 +++++++-------
include/configs/p1_p2_rdb_pc.h | 14 +++++++-------
lib/Makefile | 9 +++++++--
scripts/Makefile.spl | 10 +++++++++-
9 files changed, 80 insertions(+), 40 deletions(-)
diff --git a/common/Makefile b/common/Makefile
index 21619b3..9a9a065 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -99,10 +99,16 @@ obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
obj-$(CONFIG_USB_STORAGE) += usb_storage.o
endif
# environment
-ifdef CONFIG_SPL_ENV_SUPPORT
+ifdef CONFIG_TPL_BUILD
+obj-$(CONFIG_TPL_ENV_SUPPORT) += env_attr.o
+obj-$(CONFIG_TPL_ENV_SUPPORT) += env_flags.o
+obj-$(CONFIG_TPL_ENV_SUPPORT) += env_callback.o
+else
obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
+endif
+ifneq ($(CONFIG_TPL_ENV_SUPPORT)$(CONFIG_SPL_ENV_SUPPORT),)
obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o
obj-$(CONFIG_ENV_IS_IN_FAT) += env_fat.o
@@ -123,7 +129,11 @@ obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o
obj-$(CONFIG_HWCONFIG) += hwconfig.o
obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_TPL_BUILD
+obj-$(CONFIG_TPL_SERIAL_SUPPORT) += console.o
+else
obj-$(CONFIG_SPL_SERIAL_SUPPORT) += console.o
+endif
else
obj-y += console.o
endif
diff --git a/drivers/Makefile b/drivers/Makefile
index 7861d34..ca98273 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -40,8 +40,22 @@ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
+endif
+
+ifdef CONFIG_TPL_BUILD
+
+obj-$(CONFIG_TPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_TPL_DRIVERS_MISC_SUPPORT) += misc/ sysreset/
+obj-$(CONFIG_TPL_MMC_SUPPORT) += mmc/
+obj-$(CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_TPL_NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_TPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_TPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_TPL_SPI_SUPPORT) += spi/
+
+endif
-else
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
obj-y += adc/
obj-$(CONFIG_DM_DEMO) += demo/
diff --git a/include/common.h b/include/common.h
index e9f0dea..a8d833b 100644
--- a/include/common.h
+++ b/include/common.h
@@ -866,17 +866,20 @@ int getc(void);
int tstc(void);
/* stdout */
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT)
-#define putc(...) do { } while (0)
-#define puts(...) do { } while (0)
-#define printf(...) do { } while (0)
-#define vprintf(...) do { } while (0)
-#else
+#if !defined(CONFIG_SPL_BUILD) || \
+ (defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_SERIAL_SUPPORT)) || \
+ (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \
+ defined(CONFIG_SPL_SERIAL_SUPPORT))
void putc(const char c);
void puts(const char *s);
int printf(const char *fmt, ...)
__attribute__ ((format (__printf__, 1, 2)));
int vprintf(const char *fmt, va_list args);
+#else
+#define putc(...) do { } while (0)
+#define puts(...) do { } while (0)
+#define printf(...) do { } while (0)
+#define vprintf(...) do { } while (0)
#endif
/* stderr */
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index f75919d..8ec1a90 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -27,15 +27,15 @@
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_TPL_ENV_SUPPORT
#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_TPL_SERIAL_SUPPORT
+#define CONFIG_TPL_LIBGENERIC_SUPPORT
+#define CONFIG_TPL_LIBCOMMON_SUPPORT
+#define CONFIG_TPL_I2C_SUPPORT
+#define CONFIG_TPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_TPL_NAND_SUPPORT
+#define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_COMMON_INIT_DDR
#define CONFIG_SPL_MAX_SIZE (128 << 10)
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 5ab6602..fecaebe 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -106,15 +106,15 @@
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_TPL_ENV_SUPPORT
#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_TPL_SERIAL_SUPPORT
+#define CONFIG_TPL_LIBGENERIC_SUPPORT
+#define CONFIG_TPL_LIBCOMMON_SUPPORT
+#define CONFIG_TPL_I2C_SUPPORT
+#define CONFIG_TPL_NAND_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_COMMON_INIT_DDR
#define CONFIG_SPL_MAX_SIZE (128 << 10)
#define CONFIG_SPL_TEXT_BASE 0xD0001000
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 5d572b4..fac72f3 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -78,14 +78,14 @@
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_TPL_ENV_SUPPORT
#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_TPL_SERIAL_SUPPORT
+#define CONFIG_TPL_LIBGENERIC_SUPPORT
+#define CONFIG_TPL_LIBCOMMON_SUPPORT
+#define CONFIG_TPL_I2C_SUPPORT
+#define CONFIG_TPL_NAND_SUPPORT
+#define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_COMMON_INIT_DDR
#define CONFIG_SPL_MAX_SIZE (128 << 10)
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 5d0a570..4a277e4 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -241,14 +241,14 @@
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
-#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_TPL_ENV_SUPPORT
#define CONFIG_SPL_NAND_INIT
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_TPL_SERIAL_SUPPORT
+#define CONFIG_TPL_LIBGENERIC_SUPPORT
+#define CONFIG_TPL_LIBCOMMON_SUPPORT
+#define CONFIG_TPL_I2C_SUPPORT
+#define CONFIG_TPL_NAND_SUPPORT
+#define CONFIG_TPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_COMMON_INIT_DDR
#define CONFIG_SPL_MAX_SIZE (128 << 10)
#define CONFIG_SPL_TEXT_BASE 0xf8f81000
diff --git a/lib/Makefile b/lib/Makefile
index f6a8ba1..c81bfeb 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -78,11 +78,16 @@ obj-$(CONFIG_LIB_UUID) += uuid.o
obj-$(CONFIG_LIB_RAND) += rand.o
ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_TPL_BUILD
+SERIAL_SUPPORT := $(CONFIG_TPL_SERIAL_SUPPORT)
+else
+SERIAL_SUPPORT := $(CONFIG_SPL_SERIAL_SUPPORT)
+endif
# SPL U-Boot may use full-printf, tiny-printf or none at all
ifdef CONFIG_USE_TINY_PRINTF
-obj-$(CONFIG_SPL_SERIAL_SUPPORT) += tiny-printf.o panic.o strto.o
+obj-$(SERIAL_SUPPORT) += tiny-printf.o panic.o strto.o
else
-obj-$(CONFIG_SPL_SERIAL_SUPPORT) += vsprintf.o panic.o strto.o strmhz.o
+obj-$(SERIAL_SUPPORT) += vsprintf.o panic.o strto.o strmhz.o
endif
else
# Main U-Boot always uses the full printf support
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 3ba9742..4994fa8 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -54,12 +54,20 @@ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
libs-y += common/init/
+
+# Special handling for a few options which support SPL/TPL
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/
+libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
+else
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
+libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
+endif
+
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
libs-y += drivers/
libs-y += dts/
libs-y += fs/
-libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
libs-$(CONFIG_SPL_NET_SUPPORT) += net/
--
2.8.0.rc3.226.g39d4020
More information about the U-Boot
mailing list