[U-Boot] [PATCH v2 0/5] Remove calls from net drivers to legacy miiphy_register() entry-point

[Karl Beldan]

On Mon, Aug 08, 2016 at 11:28:36AM -0500, Joe Hershberger wrote:
> 
> This is an effort to migrate closer to the phylib approach so that a
> new DM approach can be developed from a single starting point. The more
> of this legacy code that can be removed, the easier it will be to move
> forward.
> 

Hi Joe,

It was nice to see spatch put to work. However davinci_emac crashes
U-Boot now. It is an invasive patch so it might take time to check
everything is in order, so unless you already have a follow-up series I
can send in a trivial patch just now to fix that for davinci_emac.
 
Karl


> Changes in v2:
> - Added a blank line
> - Run against the current master which adds one more driver to convert (drivers/net/macb.c)
> - Use an updated spatch that does not put closing paren on the next line
> 
> Joe Hershberger (5):
>   scripts: Add a cocci patch for miiphy_register
>   net: mii: Use spatch to update miiphy_register
>   net: mii: Changes not made by spatch
>   net: mii: Fix changes made by spatch
>   net: mii: Clean up legacy glue that is not used
> 
>  arch/m68k/include/asm/fec.h                |   9 +-
>  arch/mips/mach-au1x00/au1x00_eth.c         |  25 +++--
>  arch/powerpc/cpu/mpc8260/ether_fcc.c       |  13 ++-
>  arch/powerpc/cpu/mpc85xx/ether_fcc.c       |  13 ++-
>  arch/powerpc/cpu/mpc8xx/fec.c              |  40 +++++---
>  arch/powerpc/cpu/ppc4xx/miiphy.c           |  11 +--
>  board/gdsys/405ep/io.c                     |  13 ++-
>  board/gdsys/405ep/iocon.c                  |  27 +++++-
>  board/gdsys/405ex/io64.c                   |  25 ++++-
>  board/gdsys/mpc8308/hrcon.c                |  27 +++++-
>  board/gdsys/mpc8308/strider.c              |  27 +++++-
>  common/miiphyutil.c                        |  73 ---------------
>  drivers/net/4xx_enet.c                     |  20 ++--
>  drivers/net/armada100_fec.c                |  33 ++++---
>  drivers/net/at91_emac.c                    |  28 ++++--
>  drivers/net/bcm-sf2-eth-gmac.c             |  18 ++--
>  drivers/net/bcm-sf2-eth.c                  |  13 ++-
>  drivers/net/bcm-sf2-eth.h                  |   8 +-
>  drivers/net/bfin_mac.c                     |  43 ++++++---
>  drivers/net/davinci_emac.c                 |  34 +++++--
>  drivers/net/eepro100.c                     |  34 ++++---
>  drivers/net/enc28j60.c                     |  26 ++++--
>  drivers/net/ep93xx_eth.c                   |  40 +++++---
>  drivers/net/fsl_mcdmafec.c                 |  13 ++-
>  drivers/net/ftmac110.c                     |  35 ++++---
>  drivers/net/lpc32xx_eth.c                  |  52 +++++------
>  drivers/net/macb.c                         |  46 +++++++---
>  drivers/net/mcffec.c                       |  13 ++-
>  drivers/net/mcfmii.c                       |  19 ++--
>  drivers/net/mpc512x_fec.c                  |  30 ++++--
>  drivers/net/mpc5xxx_fec.c                  |  30 ++++--
>  drivers/net/mvgbe.c                        |  33 +++++--
>  drivers/net/phy/miiphybb.c                 |  25 ++---
>  drivers/net/sh_eth.c                       |  12 ++-
>  drivers/net/smc911x.c                      |  35 +++++--
>  drivers/qe/uec.c                           |  32 ++++---
>  include/miiphy.h                           |  20 +---
>  scripts/coccinelle/net/mdio_register.cocci | 142 +++++++++++++++++++++++++++++
>  38 files changed, 762 insertions(+), 375 deletions(-)
>  create mode 100644 scripts/coccinelle/net/mdio_register.cocci
> 
> -- 
> 1.7.11.5
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot