[U-Boot] [PATCH] armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS

[york sun]

On 08/05/2016 02:47 AM, Pratiyush Mohan Srivastava wrote:
> Remove ramdisk_addr, ramdisk_size and update UART baud-rate.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava at nxp.com>
> ---
>  include/configs/ls1012a_common.h | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
> index fba2fac..78f4f9b 100644
> --- a/include/configs/ls1012a_common.h
> +++ b/include/configs/ls1012a_common.h
> @@ -111,14 +111,12 @@
>  	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
>  	"loadaddr=0x80100000\0"			\
>  	"kernel_addr=0x100000\0"		\
> -	"ramdisk_addr=0x800000\0"		\
> -	"ramdisk_size=0x2000000\0"		\
>  	"fdt_high=0xffffffffffffffff\0"		\
>  	"initrd_high=0xffffffffffffffff\0"	\
>  	"kernel_start=0xa00000\0"		\
>  	"kernel_load=0xa0000000\0"		\
>  	"kernel_size=0x2800000\0"		\
> -	"console=ttyAMA0,38400n8\0"
> +	"console=ttyAMA0,115200n8\0"

Is console variable correct here?

>
>  #define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/ram0 " \

console is different here.


>  				"earlycon=uart8250,mmio,0x21c0500"
>

York