[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller

[Marek Vasut]

On 08/24/2016 12:39 PM, Sriram Dash wrote:
> Currently the controller by default enables the Receive Detect feature in P3
> mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably support receive
> detection in P3 mode.
> Enabling the USB3 controller to configure USB in P2 mode whenever the Receive
> Detect feature is required.
> 
> Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
> Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
> ---
> Changes in v2:
>   - Do Soc ver checking for applying erratum

I tried applying this on u-boot-usb/next , but it fails to apply, please
fix and repost.

-- 
Best regards,
Marek Vasut