[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller

[Sriram Dash]

>From: Marek Vasut [mailto:marex at denx.de]
>On 08/24/2016 12:39 PM, Sriram Dash wrote:
>> Currently the controller by default enables the Receive Detect feature
>> in P3 mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably
>> support receive detection in P3 mode.
>> Enabling the USB3 controller to configure USB in P2 mode whenever the
>> Receive Detect feature is required.
>>
>> Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
>> ---
>> Changes in v2:
>>   - Do Soc ver checking for applying erratum
>
>I tried applying this on u-boot-usb/next , but it fails to apply, please fix and repost.
>

It might be conflicting with the patch for changing burst beat
"drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests".
https://patchwork.ozlabs.org/patch/661426/
I will repost with the burst beat setting applied earlier.

>--
>Best regards,
>Marek Vasut