[U-Boot] [PATCH v2] drivers: usb: xhci-fsl: Implement Erratum A-010151 for FSL USB3 controller

[Marek Vasut]

On 08/26/2016 04:27 PM, Sriram Dash wrote:
>> From: Marek Vasut [mailto:marex at denx.de]
>> On 08/24/2016 12:39 PM, Sriram Dash wrote:
>>> Currently the controller by default enables the Receive Detect feature
>>> in P3 mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably
>>> support receive detection in P3 mode.
>>> Enabling the USB3 controller to configure USB in P2 mode whenever the
>>> Receive Detect feature is required.
>>>
>>> Signed-off-by: Sriram Dash <sriram.dash at nxp.com>
>>> Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
>>> ---
>>> Changes in v2:
>>>   - Do Soc ver checking for applying erratum
>>
>> I tried applying this on u-boot-usb/next , but it fails to apply, please fix and repost.
>>
> 
> It might be conflicting with the patch for changing burst beat
> "drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests".
> https://patchwork.ozlabs.org/patch/661426/

Great, I already applied that one.

> I will repost with the burst beat setting applied earlier.

No, please fix this patch.

>> --
>> Best regards,
>> Marek Vasut


-- 
Best regards,
Marek Vasut