[U-Boot] [PATCH][v2] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS
Pratiyush Srivastava
pratiyush.srivastava at nxp.com
Tue Aug 9 08:15:10 CEST 2016
> -----Original Message-----
> From: york sun
> Sent: Friday, August 05, 2016 10:54 PM
> To: Pratiyush Srivastava <pratiyush.srivastava at nxp.com>; u-
> boot at lists.denx.de
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> Subject: Re: [PATCH][v2] board: ls1012afrdm: overwrite
> CONFIG_EXTRA_ENV_SETTINGS
>
> On 08/05/2016 02:47 AM, Pratiyush Mohan Srivastava wrote:
> > From: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> >
> > LS1012AFRDM has 512MB of DDR.
> > So update Kernel load address as 0x96000000 instead of default
> > 0xa0000000.
> >
> > Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> > Signed-off-by: Pratiyush Mohan Srivastava
> > <pratiyush.srivastava at nxp.com>
> > ---
> > Changes for v2: Incorporated York's comments
> > - Removed ramdisk_addr, ramdisk_size
> > - Updated UART baud-rate.
> >
> > include/configs/ls1012afrdm.h | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/include/configs/ls1012afrdm.h
> > b/include/configs/ls1012afrdm.h index ad81142..f2c6ca8 100644
> > --- a/include/configs/ls1012afrdm.h
> > +++ b/include/configs/ls1012afrdm.h
> > @@ -39,4 +39,18 @@
> > #define CONFIG_SYS_MEMTEST_START 0x80000000
> > #define CONFIG_SYS_MEMTEST_END 0x9fffffff
> >
> > +#undef CONFIG_EXTRA_ENV_SETTINGS
> > +#define CONFIG_EXTRA_ENV_SETTINGS \
> > + "initrd_high=0xffffffff\0" \
>
> What is this?
[Pratiyush>] I used the LS1043 dts as the base for this dts. Since ls10143 had this parameter, I copied the same for LS1012.
>
> > + "verify=no\0" \
> > + "hwconfig=fsl_ddr:bank_intlv=auto\0" \
> > + "loadaddr=0x80100000\0" \
> > + "kernel_addr=0x100000\0" \
> > + "fdt_high=0xffffffffffffffff\0" \
> > + "initrd_high=0xffffffffffffffff\0" \
> > + "kernel_start=0xa00000\0" \
> > + "kernel_load=0x96000000\0" \
> > + "kernel_size=0x2800000\0" \
> > + "console=ttyAMA0,115200n8\0"
>
> Do you really use ttyAMA0? Isn't it ttyS0?
[Pratiyush>] I will remove the redundant console command.
>
> York
More information about the U-Boot
mailing list