[U-Boot] [PATCH][v2] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS

[Pratiyush Srivastava]

> -----Original Message-----
> From: Pratiyush Srivastava
> Sent: Tuesday, August 09, 2016 11:45 AM
> To: york sun <york.sun at nxp.com>; u-boot at lists.denx.de
> Cc: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> Subject: RE: [PATCH][v2] board: ls1012afrdm: overwrite
> CONFIG_EXTRA_ENV_SETTINGS
> 
> 
> 
> > -----Original Message-----
> > From: york sun
> > Sent: Friday, August 05, 2016 10:54 PM
> > To: Pratiyush Srivastava <pratiyush.srivastava at nxp.com>; u-
> > boot at lists.denx.de
> > Cc: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> > Subject: Re: [PATCH][v2] board: ls1012afrdm: overwrite
> > CONFIG_EXTRA_ENV_SETTINGS
> >
> > On 08/05/2016 02:47 AM, Pratiyush Mohan Srivastava wrote:
> > > From: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> > >
> > > LS1012AFRDM has 512MB of DDR.
> > > So update Kernel load address as 0x96000000 instead of default
> > > 0xa0000000.
> > >
> > > Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> > > Signed-off-by: Pratiyush Mohan Srivastava
> > > <pratiyush.srivastava at nxp.com>
> > > ---
> > > Changes for v2: Incorporated York's comments
> > >  	- Removed ramdisk_addr, ramdisk_size
> > > 	- Updated UART baud-rate.
> > >
> > > include/configs/ls1012afrdm.h | 14 ++++++++++++++
> > >  1 file changed, 14 insertions(+)
> > >
> > > diff --git a/include/configs/ls1012afrdm.h
> > > b/include/configs/ls1012afrdm.h index ad81142..f2c6ca8 100644
> > > --- a/include/configs/ls1012afrdm.h
> > > +++ b/include/configs/ls1012afrdm.h
> > > @@ -39,4 +39,18 @@
> > >  #define CONFIG_SYS_MEMTEST_START	0x80000000
> > >  #define CONFIG_SYS_MEMTEST_END		0x9fffffff
> > >
> > > +#undef CONFIG_EXTRA_ENV_SETTINGS
> > > +#define CONFIG_EXTRA_ENV_SETTINGS		\
> > > +	"initrd_high=0xffffffff\0"		\
> >
> > What is this?
> [Pratiyush>] I used the LS1043 dts as the base for this dts. Since ls10143 had
> this parameter, I copied the same for LS1012.
[Pratiyush>] I used the LS10143a_common file as a base for this dts. Since ls10143 had
> this parameter, I copied the same for LS1012.
Please ignore the previous comment .
> >
> > > +	"verify=no\0"				\
> > > +	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
> > > +	"loadaddr=0x80100000\0"			\
> > > +	"kernel_addr=0x100000\0"		\
> > > +	"fdt_high=0xffffffffffffffff\0"		\
> > > +	"initrd_high=0xffffffffffffffff\0"	\
> > > +	"kernel_start=0xa00000\0"		\
> > > +	"kernel_load=0x96000000\0"		\
> > > +	"kernel_size=0x2800000\0"		\
> > > +	"console=ttyAMA0,115200n8\0"
> >
> > Do you really use ttyAMA0? Isn't it ttyS0?
> [Pratiyush>] I will remove the redundant console command.
> >
> > York