[U-Boot] [PATCH][v2] board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS

[york sun]

On 08/05/2016 02:47 AM, Pratiyush Mohan Srivastava wrote:
> From: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
>
> LS1012AFRDM has 512MB of DDR.
> So update Kernel load address as 0x96000000 instead of default
> 0xa0000000.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha at nxp.com>
> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava at nxp.com>
> ---
> Changes for v2: Incorporated York's comments
>  	- Removed ramdisk_addr, ramdisk_size
> 	- Updated UART baud-rate.
>
> include/configs/ls1012afrdm.h | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
> index ad81142..f2c6ca8 100644
> --- a/include/configs/ls1012afrdm.h
> +++ b/include/configs/ls1012afrdm.h
> @@ -39,4 +39,18 @@
>  #define CONFIG_SYS_MEMTEST_START	0x80000000
>  #define CONFIG_SYS_MEMTEST_END		0x9fffffff
>
> +#undef CONFIG_EXTRA_ENV_SETTINGS
> +#define CONFIG_EXTRA_ENV_SETTINGS		\
> +	"initrd_high=0xffffffff\0"		\

What is this?

> +	"verify=no\0"				\
> +	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
> +	"loadaddr=0x80100000\0"			\
> +	"kernel_addr=0x100000\0"		\
> +	"fdt_high=0xffffffffffffffff\0"		\
> +	"initrd_high=0xffffffffffffffff\0"	\
> +	"kernel_start=0xa00000\0"		\
> +	"kernel_load=0x96000000\0"		\
> +	"kernel_size=0x2800000\0"		\
> +	"console=ttyAMA0,115200n8\0"

Do you really use ttyAMA0? Isn't it ttyS0?

York