[U-Boot] [PATCH 7/7] configs: Adds a defconfig for K2E High Security EVM

[Madan Srinivas]

From: Vitaly Andrianov <vitalya at ti.com>

Add a new defconfig file for the K2E High Security EVM.

This defconfig is the same as for the non-secure part, except for:
	CONFIG_TI_SECURE_DEVICE option set to 'y'
	CONFIG_FIT option set to 'y'
	CONFIG_FIT_IMAGE_POST_PROCESS option set to 'y'

Enables the platform-specific post-processing of FIT-extracted blobs such
as Kernel, DTB, and initramfs on TI K2E high-security (HS) devices
which will ultimately invokes TI proprietary secure functions
that performs secure processing such as blob authentication and
decryption.

Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
Signed-off-by: Madan Srinivas <madans at ti.com>
---

 configs/k2e_hs_evm_defconfig | 44 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 configs/k2e_hs_evm_defconfig

diff --git a/configs/k2e_hs_evm_defconfig b/configs/k2e_hs_evm_defconfig
new file mode 100644
index 0000000..ec0542d
--- /dev/null
+++ b/configs/k2e_hs_evm_defconfig
@@ -0,0 +1,44 @@
+CONFIG_ARM=y
+CONFIG_ARCH_KEYSTONE=y
+CONFIG_TARGET_K2E_EVM=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEFAULT_DEVICE_TREE="k2e-evm"
+CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="K2E EVM # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_TI_AEMIF=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_DM_ETH=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_LIB_RAND=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_FIT=y
+CONFIG_FIT_IMAGE_POST_PROCESS=y
-- 
2.7.4