[U-Boot] [PATCH 3/7] arm: omap-common: Enable support for K2 HS devices in u-boot

[Andrew F. Davis]

On 08/26/2016 01:30 AM, Madan Srinivas wrote:
> From: Vitaly Andrianov <vitalya at ti.com>
> 
> Like the OMAP54xx, AM43xx & AM33xx family SoCs, the keystone family
> of SoCs also have high security enabled models. Allow K2E devices to
> be built with HS Device Type Support.
> 
> This patch applies on top of the patch
> ti: omap-common: Allow AM33xx devices to be built securely
> sumitted by Andrew Davis
> 
> Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
> Signed-off-by: Madan Srinivas <madans at ti.com>
> ---

Acked-by: Andrew F. Davis <afd at ti.com>

> 
>  arch/arm/cpu/armv7/omap-common/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/cpu/armv7/omap-common/Kconfig b/arch/arm/cpu/armv7/omap-common/Kconfig
> index 4daccd9..91d6b2c 100644
> --- a/arch/arm/cpu/armv7/omap-common/Kconfig
> +++ b/arch/arm/cpu/armv7/omap-common/Kconfig
> @@ -1,6 +1,6 @@
>  config TI_SECURE_DEVICE
>  	bool "HS Device Type Support"
> -	depends on OMAP54XX || AM43XX || AM33XX
> +	depends on OMAP54XX || AM43XX || AM33XX || ARCH_KEYSTONE
>  	help
>  	  If a high secure (HS) device type is being used, this config
>  	  must be set. This option impacts various aspects of the
>