[U-Boot] [PATCH V2 2/3] pci: tegra: port to standard clock/reset/pwr domain APIs
Stephen Warren
swarren at wwwdotorg.org
Sat Aug 6 00:10:34 CEST 2016
From: Stephen Warren <swarren at nvidia.com>
Tegra186 supports the new standard clock, reset, and power domain APIs.
Older Tegra SoCs still use custom APIs. Enhance the Tegra PCIe driver so
that it can operate with either set of APIs.
On Tegra186, the BPMP handles all aspects of PCIe PHY (UPHY) programming.
Consequently, this logic is disabled too.
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
v2: Add TODO comment describing the messy ifdefs.
---
drivers/pci/Kconfig | 1 +
drivers/pci/pci_tegra.c | 163 ++++++++++++++++++++++++++++++++++++++++++++++--
2 files changed, 159 insertions(+), 5 deletions(-)
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 26aa2b0930a0..669e37bb5dc5 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -31,6 +31,7 @@ config PCI_SANDBOX
config PCI_TEGRA
bool "Tegra PCI support"
depends on TEGRA
+ depends on (TEGRA186 && POWER_DOMAIN) || (!TEGRA186)
help
Enable support for the PCIe controller found on some generations of
Tegra. Tegra20 has 2 root ports with a total of 4 lanes, Tegra30 has
diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c
index 352cdef56ab4..ea8adb98db33 100644
--- a/drivers/pci/pci_tegra.c
+++ b/drivers/pci/pci_tegra.c
@@ -13,22 +13,35 @@
#define pr_fmt(fmt) "tegra-pcie: " fmt
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <malloc.h>
#include <pci.h>
+#include <power-domain.h>
+#include <reset.h>
#include <asm/io.h>
#include <asm/gpio.h>
+#include <linux/list.h>
+
+#ifndef CONFIG_TEGRA186
#include <asm/arch/clock.h>
#include <asm/arch/powergate.h>
#include <asm/arch-tegra/xusb-padctl.h>
-
-#include <linux/list.h>
-
#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
+#endif
+
+/*
+ * FIXME: TODO: This driver contains a number of ifdef CONFIG_TEGRA186 that
+ * should not be present. These are needed because newer Tegra SoCs support
+ * only the standard clock/reset APIs, whereas older Tegra SoCs support only
+ * a custom Tegra-specific API. ASAP the older Tegra SoCs' code should be
+ * fixed to implement the standard APIs, and all drivers converted to solely
+ * use the new standard APIs, with no ifdefs.
+ */
DECLARE_GLOBAL_DATA_PTR;
@@ -103,6 +116,9 @@ DECLARE_GLOBAL_DATA_PTR;
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_222 (0x1 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_X4_X1 (0x1 << 20)
#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_411 (0x2 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_401 (0x0 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_211 (0x1 << 20)
+#define AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_111 (0x2 << 20)
#define AFI_FUSE 0x104
#define AFI_FUSE_PCIE_T0_GEN2_DIS (1 << 2)
@@ -110,6 +126,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define AFI_PEX0_CTRL 0x110
#define AFI_PEX1_CTRL 0x118
#define AFI_PEX2_CTRL 0x128
+#define AFI_PEX2_CTRL_T186 0x19c
#define AFI_PEX_CTRL_RST (1 << 0)
#define AFI_PEX_CTRL_CLKREQ_EN (1 << 1)
#define AFI_PEX_CTRL_REFCLK_EN (1 << 3)
@@ -173,6 +190,7 @@ enum tegra_pci_id {
TEGRA30_PCIE,
TEGRA124_PCIE,
TEGRA210_PCIE,
+ TEGRA186_PCIE,
};
struct tegra_pcie_port {
@@ -189,6 +207,7 @@ struct tegra_pcie_soc {
unsigned int num_ports;
unsigned long pads_pll_ctl;
unsigned long tx_ref_sel;
+ unsigned long afi_pex2_ctrl;
u32 pads_refclk_cfg0;
u32 pads_refclk_cfg1;
bool has_pex_clkreq_en;
@@ -209,7 +228,17 @@ struct tegra_pcie {
unsigned long xbar;
const struct tegra_pcie_soc *soc;
+
+#ifdef CONFIG_TEGRA186
+ struct clk clk_afi;
+ struct clk clk_pex;
+ struct reset_ctl reset_afi;
+ struct reset_ctl reset_pex;
+ struct reset_ctl reset_pcie_x;
+ struct power_domain pwrdom;
+#else
struct tegra_xusb_phy *phy;
+#endif
};
static void afi_writel(struct tegra_pcie *pcie, unsigned long value,
@@ -229,10 +258,12 @@ static void pads_writel(struct tegra_pcie *pcie, unsigned long value,
writel(value, pcie->pads.start + offset);
}
+#ifndef CONFIG_TEGRA186
static unsigned long pads_readl(struct tegra_pcie *pcie, unsigned long offset)
{
return readl(pcie->pads.start + offset);
}
+#endif
static unsigned long rp_readl(struct tegra_pcie_port *port,
unsigned long offset)
@@ -400,6 +431,24 @@ static int tegra_pcie_get_xbar_config(const void *fdt, int node, u32 lanes,
return 0;
}
break;
+ case TEGRA186_PCIE:
+ switch (lanes) {
+ case 0x0010004:
+ debug("x4 x1 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_401;
+ return 0;
+
+ case 0x0010102:
+ debug("x2 x1 x1 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_211;
+ return 0;
+
+ case 0x0010101:
+ debug("x1 x1 x1 configuration\n");
+ *xbar = AFI_PCIE_CONFIG_SM2TMS0_XBAR_CONFIG_T186_111;
+ return 0;
+ }
+ break;
default:
break;
}
@@ -471,6 +520,7 @@ static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id,
return err;
}
+#ifndef CONFIG_TEGRA186
pcie->phy = tegra_xusb_phy_get(TEGRA_XUSB_PADCTL_PCIE);
if (pcie->phy) {
err = tegra_xusb_phy_prepare(pcie->phy);
@@ -479,6 +529,7 @@ static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id,
return err;
}
}
+#endif
fdt_for_each_subnode(fdt, subnode, node) {
unsigned int index = 0, num_lanes = 0;
@@ -523,6 +574,44 @@ static int tegra_pcie_parse_dt(const void *fdt, int node, enum tegra_pci_id id,
return 0;
}
+#ifdef CONFIG_TEGRA186
+static int tegra_pcie_power_on(struct tegra_pcie *pcie)
+{
+ int ret;
+
+ ret = power_domain_on(&pcie->pwrdom);
+ if (ret) {
+ error("power_domain_on() failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(&pcie->clk_afi);
+ if (ret) {
+ error("clk_enable(afi) failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_enable(&pcie->clk_pex);
+ if (ret) {
+ error("clk_enable(pex) failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_deassert(&pcie->reset_afi);
+ if (ret) {
+ error("reset_deassert(afi) failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_deassert(&pcie->reset_pex);
+ if (ret) {
+ error("reset_deassert(pex) failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+#else
static int tegra_pcie_power_on(struct tegra_pcie *pcie)
{
const struct tegra_pcie_soc *soc = pcie->soc;
@@ -639,6 +728,7 @@ static int tegra_pcie_phy_enable(struct tegra_pcie *pcie)
return 0;
}
+#endif
static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
{
@@ -647,7 +737,11 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
u32 value;
int err;
+#ifdef CONFIG_TEGRA186
+ {
+#else
if (pcie->phy) {
+#endif
value = afi_readl(pcie, AFI_PLLE_CONTROL);
value &= ~AFI_PLLE_CONTROL_BYPASS_PADS2PLLE_CONTROL;
value |= AFI_PLLE_CONTROL_PADS2PLLE_CONTROL_EN;
@@ -675,6 +769,7 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
afi_writel(pcie, value, AFI_FUSE);
+#ifndef CONFIG_TEGRA186
if (pcie->phy)
err = tegra_xusb_phy_enable(pcie->phy);
else
@@ -684,9 +779,18 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
error("failed to power on PHY: %d\n", err);
return err;
}
+#endif
/* take the PCIEXCLK logic out of reset */
+#ifdef CONFIG_TEGRA186
+ err = reset_deassert(&pcie->reset_pcie_x);
+ if (err) {
+ error("reset_deassert(pcie_x) failed: %d\n", err);
+ return err;
+ }
+#else
reset_set_enable(PERIPH_ID_PCIEXCLK, 0);
+#endif
/* finally enable PCIe */
value = afi_readl(pcie, AFI_CONFIGURATION);
@@ -787,7 +891,7 @@ static unsigned long tegra_pcie_port_get_pex_ctrl(struct tegra_pcie_port *port)
break;
case 2:
- ret = AFI_PEX2_CTRL;
+ ret = port->pcie->soc->afi_pex2_ctrl;
break;
}
@@ -945,6 +1049,7 @@ static const struct tegra_pcie_soc pci_tegra_soc[] = {
.num_ports = 3,
.pads_pll_ctl = PADS_PLL_CTL_TEGRA30,
.tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN,
+ .afi_pex2_ctrl = AFI_PEX2_CTRL,
.pads_refclk_cfg0 = 0xfa5cfa5c,
.pads_refclk_cfg1 = 0xfa5cfa5c,
.has_pex_clkreq_en = true,
@@ -972,7 +1077,16 @@ static const struct tegra_pcie_soc pci_tegra_soc[] = {
.has_cml_clk = true,
.has_gen2 = true,
.force_pca_enable = true,
- }
+ },
+ [TEGRA186_PCIE] = {
+ .num_ports = 3,
+ .afi_pex2_ctrl = AFI_PEX2_CTRL_T186,
+ .pads_refclk_cfg0 = 0x80b880b8,
+ .pads_refclk_cfg1 = 0x000480b8,
+ .has_pex_clkreq_en = true,
+ .has_pex_bias_ctrl = true,
+ .has_gen2 = true,
+ },
};
static int pci_tegra_ofdata_to_platdata(struct udevice *dev)
@@ -996,6 +1110,44 @@ static int pci_tegra_probe(struct udevice *dev)
struct tegra_pcie *pcie = dev_get_priv(dev);
int err;
+#ifdef CONFIG_TEGRA186
+ err = clk_get_by_name(dev, "afi", &pcie->clk_afi);
+ if (err) {
+ debug("clk_get_by_name(afi) failed: %d\n", err);
+ return err;
+ }
+
+ err = clk_get_by_name(dev, "pex", &pcie->clk_pex);
+ if (err) {
+ debug("clk_get_by_name(pex) failed: %d\n", err);
+ return err;
+ }
+
+ err = reset_get_by_name(dev, "afi", &pcie->reset_afi);
+ if (err) {
+ debug("reset_get_by_name(afi) failed: %d\n", err);
+ return err;
+ }
+
+ err = reset_get_by_name(dev, "pex", &pcie->reset_pex);
+ if (err) {
+ debug("reset_get_by_name(pex) failed: %d\n", err);
+ return err;
+ }
+
+ err = reset_get_by_name(dev, "pcie_x", &pcie->reset_pcie_x);
+ if (err) {
+ debug("reset_get_by_name(pcie_x) failed: %d\n", err);
+ return err;
+ }
+
+ err = power_domain_get(dev, &pcie->pwrdom);
+ if (err) {
+ debug("power_domain_get() failed: %d\n", err);
+ return err;
+ }
+#endif
+
err = tegra_pcie_power_on(pcie);
if (err < 0) {
error("failed to power on");
@@ -1033,6 +1185,7 @@ static const struct udevice_id pci_tegra_ids[] = {
{ .compatible = "nvidia,tegra30-pcie", .data = TEGRA30_PCIE },
{ .compatible = "nvidia,tegra124-pcie", .data = TEGRA124_PCIE },
{ .compatible = "nvidia,tegra210-pcie", .data = TEGRA210_PCIE },
+ { .compatible = "nvidia,tegra186-pcie", .data = TEGRA186_PCIE },
{ }
};
--
2.9.2
More information about the U-Boot
mailing list