[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size"

[Stefano Babic]

Hi Fabio,

On 12/08/2016 21:38, Fabio Estevam wrote:
> Hi Otavio,
> 
> On Fri, Aug 12, 2016 at 3:27 PM, Otavio Salvador
> <otavio.salvador at ossystems.com.br> wrote:
> 
>> Why is this happening? I am fine in reverting this but we need to fix
>> the detection. Is it due memory callibration problems?
> 
> The problem here is that warp uses the DDR initialization from mx6sl-evk.
> 
> From configs/mx6slevk_defconfig:
> CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
> 
> The usage of imx_ddr_size() revealed that the DDR size is not being
> programmed correctly for the warp board.
> 

That means that reverting just hides the problem.

> The proper way to fix this is to create a board/warp/imximage.cfg file
> with the DDR configuration done specifically for this board.
> 
> Then imx_ddr_size() should work without issues for warp.
> 
> Until this is done, better go with the revert patch for now:
> 
> Tested-by: Fabio Estevam <fabio.estevam at nxp.com>

Let's say: if there won't be any fix before the release, it is ok to
revert this.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================