[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P.

[Lukasz Majewski]

Hi Marcus,

> Hello,
> 
> While U-Boot SPL 2015.10 works fine on my allwinner,sun5i-r8 board I
> face following issue with U-Boot SPL 2016.09-rc1 on it:
> 
> 	bash-4.3# cu -l /dev/cuaU0 -s 115200
> 	Connected to /dev/cuaU0 (speed 115200)
> 
> 	U-Boot SPL 2016.09-rc1 (Jul 31 2016 - 16:37:00)
> 	DRAM: 512 MiB
> 	CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
> 	Trying to boot from NAND
> 	### ERROR ### Please RESET the board ###
> 
> Any ideas what change did cause this or where to start looking after?

I do not have any idea. What I can only recommend - please use last
working release (2015.10) and perform git bisect.


> 
> Thanks,
> Marcus
> 

Best regards,
Lukasz Majewski
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160820/717e6a71/attachment.sig>