[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P.

[Marcus Glocker]

Hello,

While U-Boot SPL 2015.10 works fine on my allwinner,sun5i-r8 board I
face following issue with U-Boot SPL 2016.09-rc1 on it:

	bash-4.3# cu -l /dev/cuaU0 -s 115200
	Connected to /dev/cuaU0 (speed 115200)

	U-Boot SPL 2016.09-rc1 (Jul 31 2016 - 16:37:00)
	DRAM: 512 MiB
	CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
	Trying to boot from NAND
	### ERROR ### Please RESET the board ###

Any ideas what change did cause this or where to start looking after?

Thanks,
Marcus

-- 
[ Marcus Glocker, marcus at nazgul.ch, http://nazgul.ch                   ]