[U-Boot] U-Boot SPL 2016.09-rc1 on NTC C.H.I.P.

[Tom Rini]

On Sat, Aug 20, 2016 at 07:26:19AM +0200, Marcus Glocker wrote:
> Hello,
> 
> While U-Boot SPL 2015.10 works fine on my allwinner,sun5i-r8 board I
> face following issue with U-Boot SPL 2016.09-rc1 on it:
> 
> 	bash-4.3# cu -l /dev/cuaU0 -s 115200
> 	Connected to /dev/cuaU0 (speed 115200)
> 
> 	U-Boot SPL 2016.09-rc1 (Jul 31 2016 - 16:37:00)
> 	DRAM: 512 MiB
> 	CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
> 	Trying to boot from NAND
> 	### ERROR ### Please RESET the board ###
> 
> Any ideas what change did cause this or where to start looking after?

You're not talking about mainline when you say v2015.10, are you?  IIRC
the current state of CHIP support in mainline is that we don't have NAND
support so it's not useful just yet.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160820/2ebc8194/attachment.sig>