[U-Boot] [PATCH v3 05/11] am33xx: config.mk: Fix option used to enable SPI SPL image type

[Lokesh Vutla]

On Friday 26 August 2016 03:15 AM, Andrew F. Davis wrote:
> Before the addition of SPL boot media type Kconfig options there was no
> way to determine what boot media the SPL would be booted from, so
> it was assumed that if the SPL could load U-Boot proper via SPI then
> the SPL itself would probably also be loaded from SPI.
> 
> Use the new SPL_SPI_BOOT option to enable the generation an SPL image
> capable of being booted from SPI, and not have this depend on the SPL's
> media loading capabilities.
> 
> Signed-off-by: Andrew F. Davis <afd at ti.com>
> ---
>  arch/arm/cpu/armv7/am33xx/config.mk | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk
> index 8e655d7..2f53df8 100644
> --- a/arch/arm/cpu/armv7/am33xx/config.mk
> +++ b/arch/arm/cpu/armv7/am33xx/config.mk
> @@ -34,7 +34,7 @@ ifeq ($(CONFIG_TI_SECURE_DEVICE),y)
>  # Refer to README.ti-secure for more info
>  #
>  ALL-y	+= u-boot-spl_HS_ISSW
> -ALL-$(CONFIG_SPL_SPI_SUPPORT) += u-boot-spl_HS_SPI_X-LOADER
> +ALL-$(CONFIG_SPL_SPI_BOOT) += u-boot-spl_HS_SPI_X-LOADER

With this change CONFIG_SPL_SPI_BOOT needs to be enabled for
am43xx_hs_evm_defconfig or else SPI boot will break on AM43xx HS.

Thanks and regards,
Lokesh

>  ALL-$(CONFIG_SPL_QSPI_BOOT) += u-boot-spl_HS_XIP_X-LOADER
>  ALL-$(CONFIG_SPL_NOR_BOOT) += u-boot-spl_HS_XIP_X-LOADER
>  ALL-$(CONFIG_SPL_NAND_BOOT) += u-boot-spl_HS_X-LOADER
>