[U-Boot] [PATCH 2/2] ARM: tegra: set vdd_core for Jetson TK1

Stephen Warren swarren at wwwdotorg.org
Fri Aug 12 00:28:28 CEST 2016


From: Bibek Basu <bbasu at nvidia.com>

Program vdd_core for Jetson TK1 to 1V, which is the max safe voltage for
ultra low temperature operations. vdd_cpu and vdd_gpu are already at 1V.

Signed-off-by: Bibek Basu <bbasu at nvidia.com>
(swarren: fixed comments to better match the code)
(swarren: moved board ifdef around data in header, made code generic)
(swarren: fixed typos in commit description)
Signed-off-by: Stephen Warren <swarren at nvidia.com>
---
 board/nvidia/venice2/as3722_init.c | 13 ++++++++++++-
 board/nvidia/venice2/as3722_init.h |  4 +++-
 2 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/board/nvidia/venice2/as3722_init.c b/board/nvidia/venice2/as3722_init.c
index 960fea7ee7e3..1770ec2468de 100644
--- a/board/nvidia/venice2/as3722_init.c
+++ b/board/nvidia/venice2/as3722_init.c
@@ -32,7 +32,18 @@ void pmic_enable_cpu_vdd(void)
 {
 	debug("%s entry\n", __func__);
 
-	/* Don't need to set up VDD_CORE - already done - by OTP */
+#ifdef AS3722_SD1VOLTAGE_DATA
+	/* Set up VDD_CORE, for boards where OTP is incorrect*/
+	debug("%s: Setting VDD_CORE via AS3722 reg 1\n", __func__);
+	/* Configure VDD_CORE via the AS3722 PMIC on the PWR I2C bus */
+	tegra_i2c_ll_write_addr(AS3722_I2C_ADDR, 2);
+	tegra_i2c_ll_write_data(AS3722_SD1VOLTAGE_DATA, I2C_SEND_2_BYTES);
+	/*
+	 * Don't write SDCONTROL - it's already 0x7F, i.e. all SDs enabled.
+	 * tegra_i2c_ll_write_data(AS3722_SD1CONTROL_DATA, I2C_SEND_2_BYTES);
+	 */
+	udelay(10 * 1000);
+#endif
 
 	debug("%s: Setting VDD_CPU to 1.0V via AS3722 reg 0/4D\n", __func__);
 	/*
diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h
index 992b11f64351..c6b1247149e4 100644
--- a/board/nvidia/venice2/as3722_init.h
+++ b/board/nvidia/venice2/as3722_init.h
@@ -25,8 +25,10 @@
 #endif
 #define AS3722_SD0CONTROL_DATA	(0x0100 | AS3722_SDCONTROL_REG)
 
-#define AS3722_SD1VOLTAGE_DATA	(0x3200 | AS3722_SD1VOLTAGE_REG)
+#ifdef CONFIG_TARGET_JETSON_TK1
+#define AS3722_SD1VOLTAGE_DATA	(0x2800 | AS3722_SD1VOLTAGE_REG)
 #define AS3722_SD1CONTROL_DATA	(0x0200 | AS3722_SDCONTROL_REG)
+#endif
 
 #define AS3722_SD6CONTROL_DATA	(0x4000 | AS3722_SDCONTROL_REG)
 #define AS3722_SD6VOLTAGE_DATA	(0x2800 | AS3722_SD6VOLTAGE_REG)
-- 
2.9.2



More information about the U-Boot mailing list