[U-Boot] [PATCH v1 1/4] usb: host: ehci-vf: Migrate Vybrid USB to driver model
Sanchayan Maity
maitysanchayan at gmail.com
Wed Aug 3 13:58:48 CEST 2016
Add driver model support for Vybrid USB driver.
Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
---
Hello,
I am trying to migrate the Vybrid USB driver to driver model.
Patches are based on top of uboot master branch. With this
implementation, host works perfectly fine on both USB ports
but I have problems using it in client mode.
I tried DFU to test client mode and I get the following
Colibri VFxx # version
U-Boot 2016.09-rc1-00235-g4e8c122 (Aug 03 2016 - 17:07:48 +0530)
arm-linux-gnueabihf-gcc (Linaro GCC 5.2-2015.11-2) 5.2.1 20151005
GNU ld (GNU Binutils) 2.25.0 Linaro 2015_10
Colibri VFxx # dfu 0 nand 4
using id 'nand0,0'
using id 'nand0,1'
using id 'nand0,3'
g_dnl_register: failed!, error: -19
data abort
pc : [<8ff80f18>] lr : [<8ff612a9>]
reloc pc : [<3f431f18>] lr : [<3f4122a9>]
sp : 8fd15000 ip : 00000000 fp : 00002710
r10: 8ffb50cc r9 : 8fd16ee8 r8 : 8ffbc574
r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000
r3 : 0000f4b9 r2 : 80000000 r1 : 00000001 r0 : 00000000
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
It seems to return ENODEV from usb_setup_ehci_gadget after calling
uclass_find_device_by_seq. I am not sure what I am missing in the
current implementation. Can someone point me in the correct direction?
Since host works on both ports I would assume the device tree nodes
are correct.
Tried to look in documentation and usb-info.txt mentions that gadget
framework does not use driver model. Does this imply I cannot use
any usb gadget functionality if I am using USB DM? However the function
usb_gadget_register_driver in ci_udc.c does have a CONFIG_DM_USB and
calls into usb_setup_ehci_gadget which is in usb-uclass.c.
Regards,
Sanchayan.
---
drivers/usb/host/ehci-vf.c | 123 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 117 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ehci-vf.c b/drivers/usb/host/ehci-vf.c
index 61789dd..8c5c593 100644
--- a/drivers/usb/host/ehci-vf.c
+++ b/drivers/usb/host/ehci-vf.c
@@ -8,6 +8,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <usb.h>
#include <errno.h>
#include <linux/compiler.h>
@@ -131,6 +132,24 @@ int __weak board_ehci_hcd_init(int port)
return 0;
}
+int ehci_vf_common_init(struct usb_ehci *ehci, int index)
+{
+ int ret;
+
+ /* Do board specific initialisation */
+ ret = board_ehci_hcd_init(index);
+ if (ret)
+ return ret;
+
+ usb_power_config(index);
+ usb_oc_config(index);
+ usb_internal_phy_clock_gate(index);
+ usb_phy_enable(index, ehci);
+
+ return 0;
+}
+
+#ifndef CONFIG_DM_USB
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
@@ -143,12 +162,9 @@ int ehci_hcd_init(int index, enum usb_init_type init,
ehci = (struct usb_ehci *)nc_reg_bases[index];
/* Do board specific initialisation */
- board_ehci_hcd_init(index);
-
- usb_power_config(index);
- usb_oc_config(index);
- usb_internal_phy_clock_gate(index);
- usb_phy_enable(index, ehci);
+ ret = ehci_vf_common_init(index);
+ if (ret)
+ return ret;
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
@@ -175,3 +191,98 @@ int ehci_hcd_stop(int index)
{
return 0;
}
+#else
+struct ehci_vf_priv_data {
+ struct ehci_ctrl ctrl;
+ struct usb_ehci *ehci;
+ enum usb_init_type init_type;
+ int portnr;
+};
+
+static int vf_init_after_reset(struct ehci_ctrl *dev)
+{
+ struct ehci_vf_priv_data *priv = dev->priv;
+ enum usb_init_type type = priv->init_type;
+ struct usb_ehci *ehci = priv->ehci;
+ int ret;
+
+ ret = ehci_vf_common_init(priv->ehci, priv->portnr);
+ if (ret)
+ return ret;
+
+ if (type == USB_INIT_DEVICE)
+ return 0;
+
+ setbits_le32(&ehci->usbmode, CM_HOST);
+ writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
+ setbits_le32(&ehci->portsc, USB_EN);
+
+ mdelay(10);
+
+ return 0;
+}
+
+static const struct ehci_ops vf_ehci_ops = {
+ .init_after_reset = vf_init_after_reset
+};
+
+static int ehci_usb_probe(struct udevice *dev)
+{
+ struct usb_platdata *plat = dev_get_platdata(dev);
+ struct usb_ehci *ehci = (struct usb_ehci *)dev_get_addr(dev);
+ struct ehci_vf_priv_data *priv = dev_get_priv(dev);
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+ int ret;
+
+ priv->ehci = ehci;
+ priv->portnr = dev->seq;
+ priv->init_type = plat->init_type;
+
+ ret = ehci_vf_common_init(ehci, priv->portnr);
+ if (ret)
+ return ret;
+
+ if (priv->init_type == USB_INIT_HOST) {
+ setbits_le32(&ehci->usbmode, CM_HOST);
+ writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
+ setbits_le32(&ehci->portsc, USB_EN);
+ }
+
+ mdelay(10);
+
+ hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
+ hcor = (struct ehci_hcor *)((uint32_t)hccr +
+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0, plat->init_type);
+}
+
+static int ehci_usb_remove(struct udevice *dev)
+{
+ int ret;
+
+ ret = ehci_deregister(dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct udevice_id vf_usb_ids[] = {
+ { .compatible = "fsl,vf610-usb" },
+ { }
+};
+
+U_BOOT_DRIVER(usb_ehci) = {
+ .name = "ehci_vf",
+ .id = UCLASS_USB,
+ .of_match = vf_usb_ids,
+ .probe = ehci_usb_probe,
+ .remove = ehci_usb_remove,
+ .ops = &ehci_usb_ops,
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct ehci_vf_priv_data),
+ .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
+#endif
--
2.9.2
More information about the U-Boot
mailing list