[U-Boot] [PATCH 09/14] ARM: uniphier: move outer cache register macros to .c file
Masahiro Yamada
yamada.masahiro at socionext.com
Wed Aug 10 09:08:44 CEST 2016
Now, all of these macros are only used in cache-uniphier.c, so
there is no need to export them in a header file.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
arch/arm/mach-uniphier/arm32/cache-uniphier.c | 56 +++++++++++++++++++++-
arch/arm/mach-uniphier/arm32/ssc-regs.h | 68 ---------------------------
2 files changed, 55 insertions(+), 69 deletions(-)
delete mode 100644 arch/arm/mach-uniphier/arm32/ssc-regs.h
diff --git a/arch/arm/mach-uniphier/arm32/cache-uniphier.c b/arch/arm/mach-uniphier/arm32/cache-uniphier.c
index 4bb7d95..77a0b78 100644
--- a/arch/arm/mach-uniphier/arm32/cache-uniphier.c
+++ b/arch/arm/mach-uniphier/arm32/cache-uniphier.c
@@ -13,7 +13,61 @@
#include <asm/processor.h>
#include "cache-uniphier.h"
-#include "ssc-regs.h"
+
+/* control registers */
+#define UNIPHIER_SSCC 0x500c0000 /* Control Register */
+#define UNIPHIER_SSCC_BST (0x1 << 20) /* UCWG burst read */
+#define UNIPHIER_SSCC_ACT (0x1 << 19) /* Inst-Data separate */
+#define UNIPHIER_SSCC_WTG (0x1 << 18) /* WT gathering on */
+#define UNIPHIER_SSCC_PRD (0x1 << 17) /* enable pre-fetch */
+#define UNIPHIER_SSCC_ON (0x1 << 0) /* enable cache */
+#define UNIPHIER_SSCLPDAWCR 0x500c0030 /* Unified/Data Active Way Control */
+#define UNIPHIER_SSCLPIAWCR 0x500c0034 /* Instruction Active Way Control */
+
+/* revision registers */
+#define UNIPHIER_SSCID 0x503c0100 /* ID Register */
+
+/* operation registers */
+#define UNIPHIER_SSCOPE 0x506c0244 /* Cache Operation Primitive Entry */
+#define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */
+#define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */
+#define UNIPHIER_SSCOQM 0x506c0248
+#define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21)
+#define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21)
+#define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21)
+#define UNIPHIER_SSCOQM_S_MASK (0x3 << 17)
+#define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17)
+#define UNIPHIER_SSCOQM_S_ALL (0x1 << 17)
+#define UNIPHIER_SSCOQM_S_WAY (0x2 << 17)
+#define UNIPHIER_SSCOQM_CE (0x1 << 15) /* notify completion */
+#define UNIPHIER_SSCOQM_CW (0x1 << 14)
+#define UNIPHIER_SSCOQM_CM_MASK (0x7)
+#define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */
+#define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */
+#define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */
+#define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */
+#define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */
+#define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */
+#define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */
+#define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */
+#define UNIPHIER_SSCOQAD 0x506c024c /* Cache Operation Queue Address */
+#define UNIPHIER_SSCOQSZ 0x506c0250 /* Cache Operation Queue Size */
+#define UNIPHIER_SSCOQMASK 0x506c0254 /* Cache Operation Queue Address Mask */
+#define UNIPHIER_SSCOQWN 0x506c0258 /* Cache Operation Queue Way Number */
+#define UNIPHIER_SSCOPPQSEF 0x506c025c /* Cache Operation Queue Set Complete */
+#define UNIPHIER_SSCOPPQSEF_FE (0x1 << 1)
+#define UNIPHIER_SSCOPPQSEF_OE (0x1 << 0)
+#define UNIPHIER_SSCOLPQS 0x506c0260 /* Cache Operation Queue Status */
+#define UNIPHIER_SSCOLPQS_EF (0x1 << 2)
+#define UNIPHIER_SSCOLPQS_EST (0x1 << 1)
+#define UNIPHIER_SSCOLPQS_QST (0x1 << 0)
+
+#define UNIPHIER_SSC_LINE_SIZE 128
+#define UNIPHIER_SSC_RANGE_OP_MAX_SIZE (0x00400000 - (UNIPHIER_SSC_LINE_SIZE))
#define UNIPHIER_SSCOQAD_IS_NEEDED(op) \
((op & UNIPHIER_SSCOQM_S_MASK) == UNIPHIER_SSCOQM_S_RANGE)
diff --git a/arch/arm/mach-uniphier/arm32/ssc-regs.h b/arch/arm/mach-uniphier/arm32/ssc-regs.h
deleted file mode 100644
index 8f423e9..0000000
--- a/arch/arm/mach-uniphier/arm32/ssc-regs.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * UniPhier System Cache (L2 Cache) registers
- *
- * Copyright (C) 2011-2014 Panasonic Corporation
- * Copyright (C) 2016 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef ARCH_SSC_REGS_H
-#define ARCH_SSC_REGS_H
-
-/* control registers */
-#define UNIPHIER_SSCC 0x500c0000 /* Control Register */
-#define UNIPHIER_SSCC_BST (0x1 << 20) /* UCWG burst read */
-#define UNIPHIER_SSCC_ACT (0x1 << 19) /* Inst-Data separate */
-#define UNIPHIER_SSCC_WTG (0x1 << 18) /* WT gathering on */
-#define UNIPHIER_SSCC_PRD (0x1 << 17) /* enable pre-fetch */
-#define UNIPHIER_SSCC_ON (0x1 << 0) /* enable cache */
-#define UNIPHIER_SSCLPDAWCR 0x500c0030 /* Unified/Data Active Way Control */
-#define UNIPHIER_SSCLPIAWCR 0x500c0034 /* Instruction Active Way Control */
-
-/* revision registers */
-#define UNIPHIER_SSCID 0x503c0100 /* ID Register */
-
-/* operation registers */
-#define UNIPHIER_SSCOPE 0x506c0244 /* Cache Operation Primitive Entry */
-#define UNIPHIER_SSCOPE_CM_INV 0x0 /* invalidate */
-#define UNIPHIER_SSCOPE_CM_CLEAN 0x1 /* clean */
-#define UNIPHIER_SSCOPE_CM_FLUSH 0x2 /* flush */
-#define UNIPHIER_SSCOPE_CM_SYNC 0x8 /* sync (drain bufs) */
-#define UNIPHIER_SSCOPE_CM_FLUSH_PREFETCH 0x9 /* flush p-fetch buf */
-#define UNIPHIER_SSCOQM 0x506c0248
-#define UNIPHIER_SSCOQM_TID_MASK (0x3 << 21)
-#define UNIPHIER_SSCOQM_TID_LRU_DATA (0x0 << 21)
-#define UNIPHIER_SSCOQM_TID_LRU_INST (0x1 << 21)
-#define UNIPHIER_SSCOQM_TID_WAY (0x2 << 21)
-#define UNIPHIER_SSCOQM_S_MASK (0x3 << 17)
-#define UNIPHIER_SSCOQM_S_RANGE (0x0 << 17)
-#define UNIPHIER_SSCOQM_S_ALL (0x1 << 17)
-#define UNIPHIER_SSCOQM_S_WAY (0x2 << 17)
-#define UNIPHIER_SSCOQM_CE (0x1 << 15) /* notify completion */
-#define UNIPHIER_SSCOQM_CW (0x1 << 14)
-#define UNIPHIER_SSCOQM_CM_MASK (0x7)
-#define UNIPHIER_SSCOQM_CM_INV 0x0 /* invalidate */
-#define UNIPHIER_SSCOQM_CM_CLEAN 0x1 /* clean */
-#define UNIPHIER_SSCOQM_CM_FLUSH 0x2 /* flush */
-#define UNIPHIER_SSCOQM_CM_PREFETCH 0x3 /* prefetch to cache */
-#define UNIPHIER_SSCOQM_CM_PREFETCH_BUF 0x4 /* prefetch to pf-buf */
-#define UNIPHIER_SSCOQM_CM_TOUCH 0x5 /* touch */
-#define UNIPHIER_SSCOQM_CM_TOUCH_ZERO 0x6 /* touch to zero */
-#define UNIPHIER_SSCOQM_CM_TOUCH_DIRTY 0x7 /* touch with dirty */
-#define UNIPHIER_SSCOQAD 0x506c024c /* Cache Operation Queue Address */
-#define UNIPHIER_SSCOQSZ 0x506c0250 /* Cache Operation Queue Size */
-#define UNIPHIER_SSCOQMASK 0x506c0254 /* Cache Operation Queue Address Mask */
-#define UNIPHIER_SSCOQWN 0x506c0258 /* Cache Operation Queue Way Number */
-#define UNIPHIER_SSCOPPQSEF 0x506c025c /* Cache Operation Queue Set Complete */
-#define UNIPHIER_SSCOPPQSEF_FE (0x1 << 1)
-#define UNIPHIER_SSCOPPQSEF_OE (0x1 << 0)
-#define UNIPHIER_SSCOLPQS 0x506c0260 /* Cache Operation Queue Status */
-#define UNIPHIER_SSCOLPQS_EF (0x1 << 2)
-#define UNIPHIER_SSCOLPQS_EST (0x1 << 1)
-#define UNIPHIER_SSCOLPQS_QST (0x1 << 0)
-
-#define UNIPHIER_SSC_LINE_SIZE 128
-#define UNIPHIER_SSC_RANGE_OP_MAX_SIZE (0x00400000 - (UNIPHIER_SSC_LINE_SIZE))
-
-#endif /* ARCH_SSC_REGS_H */
--
1.9.1
More information about the U-Boot
mailing list