[U-Boot] Nvidia Trega Tk1 - /cpus/cpu at 0 missing clock-frequency property

[vinoth eswaran]

Hi,

 Currently I am working on an Nvidia Jetson Tk1 board.

With u-boot v2016.05 I am seeing the following messages on the start up

[    0.000000] Tegra clk 127: register failed with -17
[    0.004488] /cpus/cpu at 0 missing clock-frequency property
[    0.008002] /cpus/cpu at 1 missing clock-frequency property
[    0.013406] /cpus/cpu at 2 missing clock-frequency property
[    0.018751] /cpus/cpu at 3 missing clock-frequency property
[    0.879130] +USB0_VBUS_SW: Failed to request enable GPIO108: -517
[    0.883400] reg-fixed-voltage regulators:regulator at 7: Failed to
register regulator: -517
[    0.891700] +5V_USB_HS: Failed to request enable GPIO109: -517
[    0.897438] reg-fixed-voltage regulators:regulator at 8: Failed to
register regulator: -517
[    0.905852] +1.05V_RUN_AVDD_HDMI_PLL: Failed to request enable GPIO63: -517
[    0.912605] reg-fixed-voltage regulators:regulator at 11: Failed to
register regulator: -517
[    0.920982] +5V_HDMI_CON: Failed to request enable GPIO86: -517
[    0.926818] reg-fixed-voltage regulators:regulator at 12: Failed to
register regulator: -517
[    0.935194] +5V_SATA: Failed to request enable GPIO242: -517
[    0.940771] reg-fixed-voltage regulators:regulator at 13: Failed to
register regulator: -517
[    0.949148] +12V_SATA: Failed to request enable GPIO242: -517
[    0.954811] reg-fixed-voltage regulators:regulator at 14: Failed to
register regulator: -517
[    2.740489] tegra-xusb-padctl 7009f000.padctl: failed to setup XUSB
ports: -517
[    2.757663] tegra-pcie 1003000.pcie-controller: Failed to get
supply 'avddio-pex': -517
[    2.784372] serial-tegra serial at 70006000: failed to get alias id, errno -19
[    2.791460] serial-tegra serial at 70006040: failed to get alias id, errno -19

I am not sure about what's the issue here. Google search shows
something might be missing in the device tree. Can you let me know
whats the issue here.

Mit Freundlichen Grüßen
VinothKumar