[U-Boot] [RFC PATCH v2 07/11] omap: Use SD_BOOT in place of EMMC_BOOT

Andrew F. Davis afd at ti.com
Mon Aug 22 17:21:27 CEST 2016


The config option EMMC_BOOT is used in several OMAP based platforms with
the same meaning as the existing SD_BOOT. Convert all uses, no functional
changes.

Signed-off-by: Andrew F. Davis <afd at ti.com>
---
 board/ti/am335x/mux.c                    | 4 ++--
 configs/am335x_boneblack_defconfig       | 2 +-
 configs/am335x_boneblack_vboot_defconfig | 3 ++-
 configs/am335x_sl50_defconfig            | 2 +-
 configs/brppt1_mmc_defconfig             | 3 ++-
 configs/brppt1_spi_defconfig             | 3 ++-
 include/configs/am335x_evm.h             | 2 +-
 include/configs/am335x_sl50.h            | 2 +-
 include/configs/bav335x.h                | 2 +-
 include/configs/brppt1.h                 | 6 +++---
 10 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 8afa5f9..2d580d2 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -383,9 +383,9 @@ void enable_board_pin_mux(void)
 		/* Beaglebone LT pinmux */
 		configure_module_pin_mux(mii1_pin_mux);
 		configure_module_pin_mux(mmc0_pin_mux);
-#if defined(CONFIG_NAND) && defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_NAND) && defined(CONFIG_SD_BOOT)
 		configure_module_pin_mux(nand_pin_mux);
-#elif defined(CONFIG_NOR) && defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_NOR) && defined(CONFIG_SD_BOOT)
 		configure_module_pin_mux(bone_norcape_pin_mux);
 #else
 		configure_module_pin_mux(mmc1_pin_mux);
diff --git a/configs/am335x_boneblack_defconfig b/configs/am335x_boneblack_defconfig
index 5fabff6..93e6678 100644
--- a/configs/am335x_boneblack_defconfig
+++ b/configs/am335x_boneblack_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
 CONFIG_HUSH_PARSER=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
@@ -44,3 +43,4 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
 CONFIG_G_DNL_VENDOR_NUM=0x0451
 CONFIG_G_DNL_PRODUCT_NUM=0xd022
 CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig
index b47b51f..4dfe04e 100644
--- a/configs/am335x_boneblack_vboot_defconfig
+++ b/configs/am335x_boneblack_vboot_defconfig
@@ -8,7 +8,7 @@ CONFIG_SPL_STACK_R=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_FIT_SIGNATURE=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT"
+CONFIG_SYS_EXTRA_OPTIONS="ENABLE_VBOOT"
 CONFIG_HUSH_PARSER=y
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
@@ -51,3 +51,4 @@ CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
 CONFIG_G_DNL_VENDOR_NUM=0x0451
 CONFIG_G_DNL_PRODUCT_NUM=0xd022
 CONFIG_DM_I2C=y
+CONFIG_SD_BOOT=y
diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig
index 87ea29e..ff4c950 100644
--- a/configs/am335x_sl50_defconfig
+++ b/configs/am335x_sl50_defconfig
@@ -5,7 +5,6 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL=y
 CONFIG_SPL_STACK_R=y
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
 CONFIG_HUSH_PARSER=y
 # CONFIG_AUTOBOOT is not set
 CONFIG_CMD_BOOTZ=y
@@ -27,3 +26,4 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_SYS_NS16550=y
 CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig
index cf2800b..9d36530 100644
--- a/configs/brppt1_mmc_defconfig
+++ b/configs/brppt1_mmc_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1"
 CONFIG_BOOTDELAY=-2
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
@@ -35,3 +35,4 @@ CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/configs/brppt1_spi_defconfig b/configs/brppt1_spi_defconfig
index fee9973..65a5666 100644
--- a/configs/brppt1_spi_defconfig
+++ b/configs/brppt1_spi_defconfig
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL=y
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT"
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=-2
 CONFIG_HUSH_PARSER=y
@@ -41,3 +41,4 @@ CONFIG_USB=y
 CONFIG_USB_MUSB_HOST=y
 CONFIG_USB_STORAGE=y
 CONFIG_OF_LIBFDT=y
+CONFIG_SD_BOOT=y
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index ba4c215..6be0e22 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -418,7 +418,7 @@
 					"512k(u-boot),128k(u-boot-env1)," \
 					"128k(u-boot-env2),3464k(kernel)," \
 					"-(rootfs)"
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SYS_MMC_ENV_DEV		1
diff --git a/include/configs/am335x_sl50.h b/include/configs/am335x_sl50.h
index 8454872..2854536 100644
--- a/include/configs/am335x_sl50.h
+++ b/include/configs/am335x_sl50.h
@@ -114,7 +114,7 @@
 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
 #endif
 
-#if defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_SD_BOOT)
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SPL_ENV_SUPPORT
diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h
index e391c91..8743db4 100644
--- a/include/configs/bav335x.h
+++ b/include/configs/bav335x.h
@@ -548,7 +548,7 @@ DEFAULT_LINUX_BOOT_ENV \
 					"512k(u-boot),128k(u-boot-env1)," \
 					"128k(u-boot-env2),3464k(kernel)," \
 					"-(rootfs)"
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SPL_ENV_SUPPORT
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 6a239b5..69a1adc 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -50,7 +50,7 @@
 #define CONFIG_MACH_TYPE		0xFFFFFFFF /* TODO: check with kernel*/
 
 /* MMC/SD IP block */
-#if defined(CONFIG_EMMC_BOOT)
+#if defined(CONFIG_SD_BOOT)
  #define CONFIG_MMC
  #define CONFIG_GENERIC_MMC
  #define CONFIG_OMAP_HSMMC
@@ -59,7 +59,7 @@
  #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /*addr. 0x60000 */
  #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS		0x200 /* 256 KB */
  #define CONFIG_SPL_MMC_SUPPORT
-#endif /* CONFIG_EMMC_BOOT */
+#endif /* CONFIG_SD_BOOT */
 
 /*
  * When we have SPI or NAND flash we expect to be making use of mtdparts,
@@ -269,7 +269,7 @@ MMCARGS
 #define CONFIG_ENV_OFFSET		(768 << 10) /* 768 KiB in */
 #define CONFIG_ENV_OFFSET_REDUND	(896 << 10) /* 896 KiB in */
 
-#elif defined(CONFIG_EMMC_BOOT)
+#elif defined(CONFIG_SD_BOOT)
 #undef CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
-- 
2.9.3



More information about the U-Boot mailing list