[U-Boot] [PATCH] Revert "warp: Use imx_ddr_size() for calculating the DDR size"

[Fabio Estevam]

Hi Otavio,

On Fri, Aug 12, 2016 at 3:27 PM, Otavio Salvador
<otavio.salvador at ossystems.com.br> wrote:

> Why is this happening? I am fine in reverting this but we need to fix
> the detection. Is it due memory callibration problems?

The problem here is that warp uses the DDR initialization from mx6sl-evk.

>From configs/mx6slevk_defconfig:
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"

The usage of imx_ddr_size() revealed that the DDR size is not being
programmed correctly for the warp board.

The proper way to fix this is to create a board/warp/imximage.cfg file
with the DDR configuration done specifically for this board.

Then imx_ddr_size() should work without issues for warp.

Until this is done, better go with the revert patch for now:

Tested-by: Fabio Estevam <fabio.estevam at nxp.com>